User's Manual

Chapter 3 System Menu

3.8 SD CARD MENU

This submenu is for using the Terminal equipped with SD card as a removable disk, as

well as for directly accessing files on SD card.

Note: When SD card is present, the card icon will appear flashing while being accessed.

If the Terminal is preloaded with Batch AG runtime, it will automatically create two

working directories “\AG\IMPORT” and “\AG\EXPORT” on SD card.

3.8.1 RUN AS USB DISK

When the Terminal is equipped with SD card and connected to your computer via the

USB cable, it can be treated as a removable disk (USB mass storage device) as long as it

is configured properly through programming or via selecting [Run as USB Disk].

Note: The SD card must be properly configured through programming or user menu

before use.

3.8.2 ACCESS SD CARD

Edit the file system or format the SD card.

Edit Files

View and edit the file system on SD card.

Format

If the file system is not desired any more, you may format the SD card.

 If the capacity is 32 MB or under, the file system will be FAT12.

 If the capacity is 32 MB~2 GB, the file system will be FAT16.

 If the capacity is larger than 2 GB, the file system will be FAT32.

Warning! The contents on SD card will be wiped out after formatting.