User's Manual

56
8200 Series Mobile Computer Reference Manual
SPP Master
Set the Terminal as a master device.
1. Pairing with your computer (slave) must be completed first.
2. Run the utility “EchoTest.exe” on your computer. Associated settings include
- Select “RS-232” for interface.
- Use the Bluetooth COM port that has been paired.
- Set Action Mode to “Passive”.
3. Start the echo test on both ends. The Terminal will try to connect to PC (slave).
SPP Slave
Set the Terminal as a slave device.
1. Enable Authentication and set your PIN code on the Terminal.
2. Run the utility “EchoTest.exe” on your computer. Associated settings include
- Select “RS-232” for interface.
- Use the Bluetooth COM port that has been configured as “outgoing”.
- Set Action Mode to “Passive”.
3. Start the echo test on both ends.
4. The Terminal will wait for PC (master) to start the connection.
5. Enter the preset PIN code for authentication on your computer.
DUN Modem
The Terminal will try to connect to a Bluetooth modem or mobile phone.
1. Pairing with your mobile phone must be completed first.
Select “DialUp Network” for Target Machine options.
2. Run the utility “EchoTest.exe” on your computer. Associated settings include
- Select “Modem” for interface.
- Set Action Mode to “Passive”.
3. Start the echo test on both ends.
4. The Terminal will connect to your mobile phone that dials up to your computer.
HID Test
Set the Terminal as an input device.
1. The Terminal will wait for PC to start the connection.
It is suggested to disable Authentication on the Terminal.
2. Run a text editor on your computer.
3. Start to input data via the keypad on the Terminal.