User's Manual

8200 Series Mobile Computer Reference Manual

3.11.5 PAIRING TEST

The pairing procedure is for the creation and exchange of a link key between two

Bluetooth-enabled devices. The devices use the link key for future authentication when

exchanging information.

1) The Terminal will start with making an inquiry so that the system can generate a list

of device(s) that has been discovered nearby.

2) Select a desired target device.

For the device name, it can only display a maximum length of 11 characters. When

the device name is too long, it will be truncated automatically.

3) Select a Bluetooth service from the “Target Machine” menu. To stop and exit the test,

press [ESC].

After pairing successfully, the target device will be added to the Frequent Devices list

for quick connection in the future.

Note: For the initial use of Bluetooth networking, the pairing procedure must be done

before the Echo tests.