Reference Manual 8500 Version 0.
Copyright Notice Copyright © 2005 Syntech Information Company Limited. All rights reserved The software contains proprietary information of Syntech Information Company; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development this information may change without notice.
FCC & Canada Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Care & Maintenance This section is specifically prepared for those who are in charge of taking care of the terminal, such as a terminal operator or maintenance engineer. Here are some tips on how to take care and maintain the terminal. Taking care of the terminal Always keep electric equipments, such as the terminal, away from any flammable sources. Always make sure there is stable power supply for the terminal or its peripherals to operate properly. This terminal is intended for industrial use.
Getting Started Below illustrates how to have the terminal ready to work. This scenario makes use of a cradle, which may be replaced by a gang charger and other interface to PC.
i Contents Copyright Notice II FCC Regulations III Compliance with Standards III Care & Maintenance IV Getting Started V Preface 1 Typographical Conventions..........................................................................................................................2 Revision History ...........................................................................................................................................2 CHAPTER 1: Introducing CPT-8500 3 1.1 Product Highlights .
ii Contents 1.4 Unpacking the package.........................................................................................................................21 1.5 Options..................................................................................................................................................21 CHAPTER 2: Installing CPT-8500 22 2.1 Battery Pack.........................................................................................................................................
Contents CHAPTER 5: Managing CPT-8500 iii 80 5.1 For proprietary applications..................................................................................................................80 5.2 For custom applications ........................................................................................................................80 Specifications 81 Troubleshooting 83 Appendix I - Download Utilities 86 ProgLoad, all-in-one interface .....................................................
iv Table of Figures Figure 1: Have CPT-8500 ready ................................................................................................V Figure 2: Nomenclature (front & back) .....................................................................................4 Figure 3: Nomenclature of accessories .......................................................................................5 Figure 4: Dimensions ..........................................................................................
1 Preface The CPT-8500 Industrial Portable Data Terminal is a robust, versatile, high performance terminal. It is specifically designed for all-day, everyday use as well as for data-intensive applications in harsh environments. This line of product comes with built-in Bluetooth wireless technology and allows for optional 802.11b and/or GSM/GPRS modules, enabling all the time, anywhere applications and seamless real time sharing of performance.
2 Industrial CPT-8500 Reference Manual Typographical Conventions Before you start using this manual, it is important to understand the terms and typographical conventions used in the documentation. The following kinds of formatting in the text identify special information. Formatting convention Type of Information Triangular Bullet (¾) Highlight features or subjects that stand out from the text. Special Bold Items you must select, such as menu options, command buttons, or items in a list.
3 CHAPTER 1 Introducing CPT-8500 This chapter mainly explains the hardware parts and features of the CPT-8500 terminal. In This Chapter 1.1 Product Highlights ....................................................... 3 1.2 Nomenclature............................................................... 4 1.3 Features........................................................................ 7 1.4 Unpacking the package................................................ 21 1.5 Options...................................
4 Industrial CPT-8500 Reference Manual 1.2 Nomenclature 1.2.
Chapter 1 Introducing CPT-8500 1.2.
6 Industrial CPT-8500 Reference Manual 1.2.
Chapter 1 Introducing CPT-8500 7 1.3 Features 1.3.1 Power ¾ Main Battery The CPT-8500 is powered by a rechargeable 3.7 V/4000 mAh Li-ion battery pack, and it takes approximately four hours to fully charge it. During normal operation, the terminal can work for up to 500 hours. For power saving purpose, always turn off the backlight while working in a well-lit area. When the backlight is on for extended periods of time, the main battery will become low sooner than expected.
8 Industrial CPT-8500 Reference Manual ¾ Caution of Low Battery Charge The battery pack is the only power source for the terminal to work. It also charges the backup battery on the main board so that the data stored in SRAM can be retained properly. Therefore, when the main battery charge goes low, replace the battery pack with a charged one or charge it as soon as possible. Always save data before it is too late. Warning! Data loss may occur with SRAM during low battery condition.
Chapter 1 Introducing CPT-8500 9 ¾ Caution of Data Loss When the main battery is removed or drained, the backup battery on the main board is to retain the contents of SRAM and maintain the running of the calendar for at least one week, on condition that the backup battery has already been fully charged. If the terminal is to be put away for a couple of days, you should be aware that data loss occurs when both the main and backup batteries discharge completely.
10 Industrial CPT-8500 Reference Manual 24-key layout The layout of the 24-key keypad is similar to that of a telephone, which consists of an alphanumeric keypad, numbers and assorted characters. This keypad is set to numeric mode by default. For alpha mode, simply press [ALPHA] to toggle between alpha and numeric modes.
Chapter 1 Introducing CPT-8500 11 44-key layout The layout of the 44-key keypad includes numeric, alphabetic, assorted characters, function and modifier keys. Figure 6: 44-key layout For the 44-key keypad, these keys can be categorized into the following groups by color: Blue Area: 9 Two [Enter] keys: user-friendly and convenient for either right-handed or left-handed operator to perform general function of a [Enter] key.
12 Industrial CPT-8500 Reference Manual Black Area: 9 Power key 9 Numeric keys 9 Modifier keys: [Shift] or [Alt] that modifies its next key. The functionality depends on software application. 9 Others like [Backspace], [ESC], [Space], [Tab], [Insert], [Delete], [ - ], [ . ] Yellow Area: 9 [Scan] button 9 Navigation keys for moving the cursor up, down, left, right. 9 Alphabetic keys 9 Others like punctuation keys for comma & semi-colon, dollar & colon.
Chapter 1 Introducing CPT-8500 13 ¾ Backlight Setting The LED backlight of screen and keyboard helps ease reading under dim environments. It can be alternately toggled ON and OFF by simultaneously pressing the following keys: 24-key: [Enter] + [FN] 44-key: [Enter] + [RED] ¾ Touch Screen & Signature Capture This LCD is also a touch screen, which enables the use of a stylus for handwriting.
14 Industrial CPT-8500 Reference Manual 1.3.9 Readers A wide variety of readers is available for delivering flexibility to meet different requirements. Note: All specifications are subject to change without prior notice. Long Range Imager Resolution: 0.125 mm ~ 1.
Chapter 1 Introducing CPT-8500 15 1.3.10 Wireless Support The CPT-8500 terminal supports state-of-the-art wireless technologies so that it is able to send/receive data in real time in an efficient way. WPAN: IrDA, Standard infrared (IR) technology for data exchange, embedded WPAN: Bluetooth technology for cable replacement & data exchange, embedded WLAN: IEEE 80.
16 Industrial CPT-8500 Reference Manual Standard IrDA Port The terminal has an integrated IrDA port at the bottom, which can directly establish connection with an IrDA device for printing or data exchange. Simply have the IrDA port of the terminal toward the IrDA port of the target device. IrDA specifications define communications (transmit/receive data) between two IrDA enabled devices within a very short range, line-of-sight.
Chapter 1 Introducing CPT-8500 17 Bluetooth Class 2 With built-in Bluetooth technology, the terminal can directly communicate with any Bluetooth enabled device, not necessarily line-of-sight. Bluetooth is an industrial standard for Wireless Personal Area Networking (WPAN), which enables wireless communications within a short range. Serial Port Profile (SPP) is for ad-hoc networking, without going through any access point.
18 Industrial CPT-8500 Reference Manual IEEE 802.11b When the 802.11b module is installed, the terminal can easily connect to legacy networks through access points (APs). Roaming among different networks is possible. IEEE 802.11b is an industrial standard for Wireless Local Area Networking (WLAN), which enables wireless communications over a long distance. The speed of connection between two wireless devices will vary with range and signal quality. To maintain a reliable connection, the 802.
Chapter 1 Introducing CPT-8500 19 GSM/GPRS When the GSM/GPRS module is installed, the terminal is capable of data communications over free air, on the road. GSM and GPRS are industrial standards for Wireless Wide Area Networking (WWAN), which enables wireless communications over free air. “GSM” is an abbreviation of Global System for Mobile Communications. “GPRS” is an abbreviation of General Packet Radio Service.
20 Industrial CPT-8500 Reference Manual 1.3.11 Resistance ¾ Shock The terminal is designed for harsh industrial environments, and is proved to survive drop test by the following criteria: Surface type: Concrete Distance to surface: 2 meters Drop times: multiple ¾ Splash & Dust The Ingress Protection (IP) rating is often used to indicate the protection afforded by enclosures of an electronic device, and an IP number specifies the protection level.
Chapter 1 Introducing CPT-8500 21 1.4 Unpacking the package The following items are included in the package. Save the box and packaging material for future use when you need to store or ship the terminal. Terminal: CPT-8500 One rechargeable Li-ion battery pack Stylus Hand Strap Software CD & Reference Manual (for authorized distributors only) Note: For battery charging, you'll need to purchase a charging cradle or gang charger. 1.
22 CHAPTER 2 Installing CPT-8500 The terminal is designed for portable use, and it almost requires no installation except installing the battery pack and necessary auxiliary parts. Warning! The use of any batteries or charging devices, which are not originally sold/manufactured by Syntech for its CipherLab product lines, will void your warranty and may cause damage to human body or the product itself. Here are some tips and suggestions that ensure safe and comfortable experience with the terminal.
Chapter 2 Installing CPT-8500 23 ¾ Charging Make use of a serial cradle (RS-232). Make use of a modem cradle. Make use of a gang charger (charging up to four battery packs at the same time). ¾ Communications Wireless - make use of wireless technologies, embedded or added by module. Wired - make use of a cradle. In This Chapter 2.1 Battery Pack................................................................. 23 2.2 Hand Strap ..........................................................
24 Industrial CPT-8500 Reference Manual Figure 8: Installing battery pack 2.2 Hand Strap When a hand strap is necessary, install it to the terminal by following the steps: 1 Place the terminal face down on a flat and clean surface. 2 Screw one end of the hand strap to the shield-like cover on the back of the terminal. 3 Insert and hook the other end of the hand strap to the bottom of the terminal. 4 Make sure the hand strap is securely attached to the terminal.
Chapter 2 Installing CPT-8500 25 Figure 9: Installing hand strap 2.3 Pistol Grip When a pistol grip is necessary, install it to the terminal by following the steps: 1 Place the terminal face down on a flat and clean surface. 2 Remove the shield-like cover on the back of the terminal by unscrewing. If there is a hand strap installed, remove it first. Keep the cover and screws for future use when the pistol grip is not desired.
26 Industrial CPT-8500 Reference Manual Figure 10: Installing pistol grip 2.4 Cradle, serial or modem For charging and communications at the same time, a cradle is necessary. 1 Place the cradle in a flat and clean surface. 2 Connect the line of the power adaptor to the power jack on the back of the cradle. 3 Connect the power adaptor to a suitable power outlet. 4 The cradle is ready for charging. 5 If data communications are desired at the same time, connection must be established as well.
Chapter 2 Installing CPT-8500 27 For example, below illustrates an RS-232 cable connected between a computer and the cradle. The interface between the terminal and the cradle is serial IR that can run data in a higher speed than IrDA. Note: Make sure the connection is made secured.
28 Industrial CPT-8500 Reference Manual 2.4.1 Cradle Options The choice of cradle can be very flexible. Choose a suitable type that best meets your needs. Note: The cradle is designed for communications and charging at the same time.
Chapter 2 Installing CPT-8500 29 2.4.2 Status Indicators ¾ Charging Status For main battery, view the screen of the CPT-8500. For spare battery, see cradle LEDs. ¾ Communications & Port Status See cradle LEDs: RX, TX and Power.
30 Industrial CPT-8500 Reference Manual 2.4.3 DIP Switch The modem cradle (left) integrates a modem to the original serial cradle (right). Through toggling the DIP switch, the modem cradle can make use of the modem or RS-232 port for flexibility in connection.
Chapter 2 Installing CPT-8500 31 2.5 Charging 2.5.1 Cradle After being set up, the cradle is ready for charging the terminal (loaded with main battery) and one spare battery pack. Seat the terminal and/or the spare battery pack then. 2.5.2 Gang Charger If you have purchased the 4-bay gang charger, you can charge up to four batteries at the same time. This is particularly convenient for a non-stop operation or locations where a proper power supply is unavailable.
32 Industrial CPT-8500 Reference Manual 2.6.1 Wired The terminal is capable of wired communications via: Serial cradle Modem cradle See the following flow chart for instructions on the procedure.
Chapter 2 Installing CPT-8500 33 ¾ Serial Cradle (RS-232) When the cradle is set up, 1 Connect one end of a RS-232 cable to the RS-232 port on the back of the cradle. 2 Connect the other end of the cable to the RS-232 port of a host computer. 3 See the flow chart for the rest steps. ¾ Modem Cradle When the cradle is set up, 1 For communications via an internal modem, slide the DIP switch on the back of the cradle to right. 2 Connect the telephone line to the [Line] jack on the back of the cradle.
34 CHAPTER 3 Software Architecture The software inside the terminal mainly consists of three modules: Kernel, System, and Program. Figure 15: Software Architecture In This Chapter 3.1 Program Module .......................................................... 35 3.2 System & Kernel Modules...........................................
Chapter 3 Software Architecture 35 3.1 Program Module ¾ Preloaded Application The terminal is preloaded with a proprietary application program, that is, the AG Runtime (U8500*.SHX). After being physically set up and configured properly through the proprietary Application Generator (AG8500m.exe), the terminal is ready to collect data. The main menu is generated by the AG Runtime, U8500*.SHX.
36 Industrial CPT-8500 Reference Manual 3.2 System & Kernel Modules For system configurations and managing multiple programs, each terminal comes with the System Menu, Kernel Menu, and Program Manager. ¾ System Menu This is generated by the System module. You may configure parameters, test components, download or update the active application program (the one with the Program module), and download one custom font file. ¾ Kernel Menu This is generated by the Kernel module.
37 CHAPTER 4 Configuring CPT-8500 This section mainly describes the alternatives to configure the CPT-8500 terminal, including hardware configuration and downloading application programs. In This Chapter 4.1 System Menu ............................................................... 38 4.2 Program Manager ........................................................ 70 4.3 Kernel Menu ................................................................
38 Industrial CPT-8500 Reference Manual 4.1 System Menu The System Menu is generated by a powerful utility, which offers an interface for engineers (programmers or system integrator) to view system information, change the configuration parameters, download programs and run diagnostics. This menu is designed for engineering tests and maintenance ONLY. For this reason, the System Menu provides password protection to prevent unauthorized users from accidentally changing system settings.
Chapter 4 Configuring CPT-8500 39 4.1.1 Information The information provided here helps diagnose the system. H/W: Hardware version (PCB) S/N: Serial number of the terminal M/D: Manufacturing date KNL: Kernel version LIB (BSC): C library or BASIC run-time version USR: Application program version DEV: Code for optional hardware configurations, i.e.
40 Industrial CPT-8500 Reference Manual 4.1.2 Settings Here provides options to change the default settings. System Settings Default Values Clock blank Backlight Period 20 seconds Auto Off 10 minutes Power On Options Program Resume Key Click Tone 2 System Password Open access Font System font ¾ Settings > Clock Set date and time for Real Time Clock. Enter two digits for the year, i.e. 04 for 2004.
Chapter 4 Configuring CPT-8500 41 ¾ Settings > Backlight Period Set the backlight duration for the keypad and LCD. Enter a value between 0 and 9999. ¾ Settings > Auto Off Set time threshold for the terminal to automatically power off when no operation is taking place during that specific period. Enter a value between 0 and 999. Note: To disable this function, enter 0.
42 Industrial CPT-8500 Reference Manual ¾ Settings > Key Click There is audible feedback for pressing a key on the keypad. The current value is highlighted. Select a tone for the buzzer or mute it. ¾ Settings > System Password Set a password to control user access to the System Menu. The password consists of eight characters at most. Note: To disable a previous password, enter blank on the following screens.
Chapter 4 Configuring CPT-8500 43 ¾ Settings > Font Current font information can be viewed here. Default: System font Custom font file, if there is one The font settings here can be changed if a "multi-language" font file has been downloaded. (Press [Up] or [Down] to move the cursor up or down through the menu of options.) ¾ Settings > Screen Calibration The cross mark will appear on the four corners of the screen for alignment.
44 Industrial CPT-8500 Reference Manual ¾ Settings > Reset to Default Reset all settings to the default values. The following dialog box prompts for confirmation.
Chapter 4 Configuring CPT-8500 45 4.1.3 Tests Here provides functional tests for key parts. ¾ Tests > Reader Test the reading performance of the scanner, with laser or image scanning engine. Press [SCAN] to start. To stop and exit the test, press any key.
46 Industrial CPT-8500 Reference Manual ¾ Tests > Buzzer Test the buzzer with different frequency/duration combinations. Press [Enter] to start. Press any key to stop and exit the test. ¾ Tests > LCD & LED Test the LCD display and LED indicator. Press [Enter] to start. Press any key to stop and exit the test. ¾ Tests > Keyboard Test the rubber keys. Press any key and its corresponding character will be shown on the screen. Press [ESC] to stop and exit the test.
Chapter 4 Configuring CPT-8500 47 4.1.4 Memory Here provides information and initialization function of the memory. ¾ Memory > Size information Base RAM (SRAM for data memory) Memory Card (SRAM for data memory) Flash (for program memory) Note: If memory card is present, it will replace Base RAM in use. ¾ Memory > Initialize Initialize the data memory, Base RAM or Memory Card. Warning! The contents of the data memory (SRAM) will be wiped out after memory initialization.
48 Industrial CPT-8500 Reference Manual 4.1.5 Power Here shows current voltage consumption. Main: This refers to the main battery. It shows dynamic status of the battery pack, as the main power source. Backup: This refers to the backup battery. It shows dynamic status of the button cell, which is used to retain data in SRAM.
Chapter 4 Configuring CPT-8500 49 4.1.6 Load Program Download program or font file to the active memory bank. New application program Program update Font file, i.e. multi-language font ¾ Results Success: the new program or font file will be activated right after downloading. Failure: the terminal will resume to the current application program or system font. Interface Cradle-IR The communication parameters at PC end should be set accordingly. IrDA Point to the target IrDA device.
50 Industrial CPT-8500 Reference Manual 4.1.7 Bluetooth Menu This submenu is for the built-in Bluetooth technology to work with other Bluetooth enabled devices. Parameters must be configured correctly. Bluetooth Menu: Settings: Default Values Connect Setting Local Name blank Remote Name blank Broadcast Me Enable Power Saving Enable Authentication Disable PIN Code blank DHCP Enable SubNet Mask 255.255.128.0 Local IP Address 0.0.0.0 Default Gateway 0.0.0.0 DNS Server 0.0.0.
Chapter 4 Configuring CPT-8500 51 ¾ Bluetooth Menu > Information Information of network configuration can be viewed here. LIB (BSC): C library or BASIC run-time version MAC: MAC ID of the Bluetooth module IAM: A name given to the terminal for identification. CTY: “Normal” means frequency range is 2.4 ~ 2.5 GHz. There are bandwidth limitations for 2.4 GHz ISM band in some countries. For example, only 23 RF channels defined instead of 79 RF channels in Japan, Spain and France.
52 Industrial CPT-8500 Reference Manual ¾ Bluetooth Menu > Connect Setting A basic Bluetooth system can be configured as (1) point to point and (2) point to multi-point (Piconet; up to seven slaves can be connected to a master). Set the following parameters. Local Name: Enter a name for identifying the terminal. Remote Name: Enter a name for making specific connection. The remote name must be one of those in the Freq. Dev. List.
Chapter 4 Configuring CPT-8500 53
54 Industrial CPT-8500 Reference Manual ¾ Bluetooth Menu > Security Set up or modify security parameters: Authentication: Options - Enable or Disable PIN Code: Define the encryption key values. Up to 13 characters, using ASCII code.
Chapter 4 Configuring CPT-8500 55 ¾ Bluetooth Menu > Echo Tests Echo tests are used for verifying connectivity to make sure the terminal is within coverage. Press [ESC] to stop and exit the test. For PAN mode, it helps estimate the number of APs and terminals, and determine the topology of deploying APs. “SPP”: Serial Port Profile - for ad hoc networking, without going through any access point. “Dial Out”: For Dial-Up Networking Profile, also known as DUN.
56 Industrial CPT-8500 Reference Manual SPP Master: Set the terminal as a master device. It is to be followed by an attempt to make connection. SPP Slave: Set the terminal as a slave device. It is to be followed by an attempt to make connection. Dial Out Set the terminal as a modem. It is to be followed by an attempt to make connection with the target device. The target device may be a mobile phone or Bluetooth modem.
Chapter 4 Configuring CPT-8500 PAN(BNEP) Client: 57 Set the terminal as a client. Enter the IP address of a server that connection is desired. It is to be followed by an attempt to make connection with APs. PAN(BNEP) Server: Set the terminal as a server. It is to be followed by an attempt to make connection with APs.
58 Industrial CPT-8500 Reference Manual ¾ Bluetooth Menu > Pairing Test Pairing is for the creation and exchange of a link key between two devices. The devices use the link key for future authentication when exchanging information. After inquiry, there will be a “Target Machine” menu for selecting mode: Serial Port (SPP) Access Point (PAN) Dial Up Network (DUN) Press [ESC] to stop and exit the test.
Chapter 4 Configuring CPT-8500 59 ¾ Bluetooth Menu > Freq. Dev. List After successful pairing test, it will generate a list of device/s that the terminal has been connected to lately. During roaming or making new connection, the terminal will automatically connect to the listed device/s. Note: To un-pair any device, simply delete the device from this list. SPP mode (Serial Port Profile): Only one device listed for quick connection.
60 Industrial CPT-8500 Reference Manual ¾ Bluetooth Menu > Network Setting Set network parameters: DHCP: Options - Enable or Disable SubNet Mask: Enter a new Mask IP, if necessary. Local IP Address: Enter a new address for the terminal, if necessary. Default Gateway: Enter a new address for the default Gateway, if necessary. DNS Server: Enter a new address for the DNS server, if necessary. Domain Name: The domain name of the host is shown here.
Chapter 4 Configuring CPT-8500 61
62 Industrial CPT-8500 Reference Manual 4.1.8 IEEE 802.11b Menu This submenu is for IEEE 802.11b wireless networking. Parameters must be configured correctly. Note: This menu is available only when the 802.11b module is installed. 802.11b Menu: Settings: Default Values Network Setting DHCP Enable SubNet Mask 255.255.128.0 Local IP Address 0.0.0.0 Default Gateway 0.0.0.0 DNS Server 0.0.0.
Chapter 4 Configuring CPT-8500 63 ¾ 802.11b Menu > Information Information of network configuration can be viewed here. MAC: MAC ID of the 802.11b module DHCP: DHCP being enabled or disabled IP: IP address of the terminal Mask: Subnet Mask Gate: Default Gateway ¾ 802.11b Menu > Network Setting Set general network parameters. DHCP: Options - Enable or Disable SubNet Mask: Enter a new Mask IP, if necessary.
64 Industrial CPT-8500 Reference Manual ¾ 802.11b Menu > WLAN Setting 802.11b system can operate in two modes (1) Ad-hoc mode: peer-to-peer, and (2) Infrastructure mode: point to multi-point through access points. Set the following parameters. Local Name: Enter a name for identifying the terminal. Domain Name: The domain name of the host is shown here. SS ID: This refers to Service Set ID or Identifier.
Chapter 4 Configuring CPT-8500 65
66 Industrial CPT-8500 Reference Manual ¾ 802.11b Menu > Security Set up or modify security parameters: Authentication [1] Open System: Default authentication type [0] Share Key: This requires implementing WEP key.
Chapter 4 Configuring CPT-8500 WEP Menu WEP Setting: Enable or Disable (for Share Key, it must be enabled.
68 Industrial CPT-8500 Reference Manual ¾ 802.11b Menu > Echo Tests Echo tests are used for verifying connectivity to make sure the terminal is within coverage. Client Mode: Set the terminal as a client. Enter the IP address of a server that connection is desired. It is followed by an attempt to make connection with APs.
Chapter 4 Configuring CPT-8500 Server Mode: 69 Set the terminal as a server. It is followed by an attempt to make connection with APs.
70 Industrial CPT-8500 Reference Manual 4.2 Program Manager The CPT-8500 terminal supports multiple applications and languages. In the menu of Program Manager, it can download up to seven programs and one of them is made active. Warning! The Program Manager menu is NOT for the use of any end users.
Chapter 4 Configuring CPT-8500 71 4.2.1 Download Multiple application programs can be downloaded through a variety of interfaces. Here brings a full list of programs that are currently stored on the terminal with size information (program name of 12 characters; size in kilo bytes). A suffix letter after the memory bank (01~06) indicates the file type of program.
72 Industrial CPT-8500 Reference Manual Figure 16: Downloading through Program Manager ¾ Memory Bank 01 ~ 06 Only application program can be downloaded to these banks. Empty bank: 1. Select an empty bank by pressing the corresponding number and then [Enter]. 2. Select baud rate for downloading. 3. Connect cable and wait connecting… 4. To abort the action, press [ESC]. Then press [ESC] again to return to the menu. Occupied bank: If no available banks, you'll have to replace one program with the new one.
Chapter 4 Configuring CPT-8500 73 ¾ Active Memory Bank Only the application program and font file that need to be activated immediately can be downloaded to the active bank. The new font file may not be shown in the program list if application programs take all banks, but you can view font information in the System Menu. Active bank: 1. Select the active program (may be an empty bank) by pressing the corresponding number (that is 7) and then [Enter]. 2. Connect cable and wait connecting… 3.
74 Industrial CPT-8500 Reference Manual 4.2.3 Upload You may duplicate any program or all in the terminal to a host computer or another terminal. ¾ One Program The procedures are similar to those for loading programs. ¾ All Programs The procedures are similar to those for loading programs.
Chapter 4 Configuring CPT-8500 75 4.3 Kernel Menu The Kernel Menu resides in the innermost core of the system. It has the highest security and is always protected by the system. When the application program is corrupted and the System Menu fails, the Kernel Menu provides an access to fix the system. Warning! The Kernel Menu is NOT for the use of any end users.
76 Industrial CPT-8500 Reference Manual 4.3.1 Kernel Information The information provided here helps diagnose the system. H/W: Hardware version (PCB) S/N: Serial number of the terminal M/D: Manufacturing date KNL: Kernel version DEV: Code for optional hardware configurations, i.e. 2400-1 2 4 0 0 Type of Reader Type of Wireless Module RFID Module Reserved 0= none 0= none 0= none 0= 24-key 1= CCD 3= GSM (+ Bluetooth) 1= RFID 1= 44-key 2= Laser 4= 802.
Chapter 4 Configuring CPT-8500 77 4.3.2 Load Program Download program or font file to the active memory bank. New application program Program update Font file, i.e. multi-language font ¾ Results Success: the new program or font file will be activated right after downloading. Failure: the terminal will resume to the current application program or system font. Interface Cradle-IR The communication parameters at PC end should be set accordingly. IrDA Point to the target IrDA device.
78 Industrial CPT-8500 Reference Manual 4.3.4 Test & Calibrate These tools are provided for manufacturing use. No user definition is allowed. Burn-In Test Calibrate RTC Base RAM Test Memory Card Test IR Test Bluetooth Test CF (CompactFlash) Test Scanner Test LCDTest 2D Test Warning! This is NOT for the use of any end users.
Chapter 4 Configuring CPT-8500 79 4.3.5 Bluetooth Menu This submenu is the same as that under the System Menu except there is no Network Setting here. Moreover, the echo test for Bluetooth in Kernel mode is available for SPP (Serial Port Profile) only.
80 CHAPTER 5 Managing CPT-8500 Depending on the application program downloaded to the terminal, managing the CPT-8500 terminal at PC end can be very flexible and simple. Note: For details, please see relevant documents such as Programming Guide. In This Chapter 5.1 For proprietary applications......................................... 80 5.2 For custom applications............................................... 80 5.1 For proprietary applications For the preloaded application program (U8500*.
Specifications Specifications Power Main battery: Rechargeable 3.7 V, 4000 mAh Li-ion battery pack Backup battery: Rechargeable 3.
82 Industrial CPT-8500 Reference Manual Dimensions: 228 mm (L) x 89.5 mm (W) x 59.5 mm (H) Weight: Approx. 450 g Approx.
Troubleshooting 83 Troubleshooting The terminal does not power on when POWER key being pressed… 9 Make sure the battery pack is installed properly. 9 Re-charge the battery inside the terminal and monitor the charging status. (see 4.1.5) 9 If the battery is faulty, replace it with a fresh and fully charged battery then. 9 Only use the original battery or charging device for the CipherLab product line.
84 Industrial CPT-8500 Reference Manual The reader does not decode after scanning… Unreadable barcode 9 Check if the barcode is defaced. A defaced barcode may not be readable. Un-programmed to read 9 Check if the scanner is programmed to read the symbologies (types of barcode) that you are trying to read. 9 Try scanning a test barcode of the symbology you are trying to read. Dirty scan window9 Check if the barcode is defaced. A defaced barcode may not be readable.
Troubleshooting 85 Over MODEM port via Cradle 9 Check if the modem connection is correct and secured. 9 Make sure the modem parameters are configured to match the parameters on the terminal. Try to establish connection again. 9 Make sure the terminal is well seated inside the cradle. DO NOT remove the terminal or disconnect the cradle before communications are done. 9 If the problem persists, run the IR Echo Test to check the IR interface between the terminal and the cradle. (see 4.1.
86 Industrial CPT-8500 Reference Manual Appendix I - Download Utilities These utilities are for downloading any user program (*.shx or *.syn) to the terminal. *.SHX: Any C program, such as AG runtime, Basic runtime or font file. *.SYN: Any Basic program based on Basic runtime installed first. Currently, the ProgLoad.exe has replaced several previously released utilities. ProgLoad.exe has replaced the following utilities: File type: Download. exe *.SHX IRLoad.exe *.SHX SynLoad.exe *.
Appendix I - Download Utilities ¾ Downloading in Kernel mode Figure 17: Downloading in Kernel mode ¾ Downloading in Program Manager mode Figure 18: Downloading in Program Manager mode ProgLoad, all-in-one interface File name: ProgLoad.exe It supports all file types and communications interfaces.
88 Industrial CPT-8500 Reference Manual TCP/IP Connection via networks File Type: *.SHX Any C program, such as AG runtime, Basic runtime or font file *.SYN Any Basic program based on Basic runtime installed first ¾ Selection Menu Step 1: Execute program. The following menu pops up. Step 2: Select interface, file and COM port properties from the menu.
Appendix I - Download Utilities 89 IRLoad, Cradle-IR interface File name: IRLoad.exe It supports command line arguments. ¾ Selection Menu Step 1: Execute program. Step 2: Choose file. Step 3: Set the following COM port properties. ¾ Command Line IRLOAD U8300-114.SHX,2,1//COM2,115200 bps If command line arguments are not given, the user can select appropriate parameters from the pop-up dialog box.
90 Industrial CPT-8500 Reference Manual Download, RS-232 or IrDA interface File name: Download.exe It supports command line arguments. ¾ Selection Menu Step 1: Execute program. Step 2: Choose file. Step 3: Set the following COM port properties.
Appendix I - Download Utilities TcpLoad, IP interface File name: TcpLoad.exe ¾ Selection Menu Step 1: Execute program. Step 2: Choose file. Step 3: Set target IP address as follows.
92 Index A Access Point • 17, 18, 59 Activate • 73 Ad-hoc • 17, 18, 64 AG Runtime • 35 Application Generator (AG) • 35, 80 Authentication • 54, 66 Auto Off • 41 B Backlight • 13, 41 Battery • 22, 23 Backup • 7 Low • 8 Main • 7 Bluetooth • 15, 17, 33 Menu • 50, 79 BNEP • 17, 55, 57 Broadcast • 52 BSC • 39, 51 Buzzer • 13, 46 C Calendar • 8 Calibrate • 78 Calibration • 43 Charging • 23, 31 Initial • 7 Status • 29 Client Mode • 57, 68 Communications • 23, 31 Status • 29 Wired • 32 Wireless • 33 CPU • 8 Crad
Index L LCD • 12, 46 LED • 13, 46 LIB • 39, 51 Local IP • 51, 60, 63 Local Name • 52, 64 M MAC • 51, 63 Master Mode • 56 Memory • 8, 46, 47 Module Kernel • 36 Program • 35 System • 36 P Pairing • 58 PAN • 17, 55, 57, 58, 59 Piconet • 52 PIN • 54 Pistol Grip • 22, 25 Power • 7, 48 Power On • 41 Power Saving • 52, 64 Preamble • 64 Program Manager Menu • 36, 70 R Reader • 45 2D Scanner • 14 Laser Scanner • 14 Long Range Imager • 14 RFID Reader • 14 Real Time Clock (RTC) • 7, 40 Remote Name • 52 Reset • 44
