FCC Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Reference Manual 8500 Version 0.
Compliance with Standards This equipment has been tested and found in compliance with the following technical standards: Information Technology Equipment Low Voltage Directive (LVD) - EN 60950-1 Electromagnetic Compatibility (EMC) - EN 55022, EN 55024 - EN 61000-3-2, EN 61000-3-3 Radio & Telecommunications Terminal Equipment II Technical Characteristics (2.
Care & Maintenance This section is specifically prepared for those who are in charge of taking care of the terminal, such as a terminal operator or maintenance engineer. Here are some tips on how to take care and maintain the terminal. Taking care of the terminal Always keep electric equipments, such as the terminal, away from any flammable sources. Always make sure there is stable power supply for the terminal or its peripherals to operate properly. This terminal is intended for industrial use.
Getting Started Below illustrates how to have the terminal ready to work. This scenario makes use of a cradle, which may be replaced by a gang charger and other interface to PC.
i Contents FCC Regulations I Compliance with Standards II Care & Maintenance III Getting Started IV Preface 1 Typographical Conventions ..........................................................................................................................2 Revision History ...........................................................................................................................................2 CHAPTER 1: Introducing 8500 3 1.1 Product Highlights ..........................
ii Contents 1.4 Unpacking the package .........................................................................................................................20 1.5 Options..................................................................................................................................................20 CHAPTER 2: Installing 8500 21 2.1 Battery Pack..........................................................................................................................................
Contents CHAPTER 5: Managing 8500 iii 79 5.1 For proprietary applications..................................................................................................................79 5.2 For custom applications ........................................................................................................................
iv Table of Figures Figure 1: Have 8500 ready ....................................................................................................... IV Figure 2: Nomenclature (front & back) .....................................................................................4 Figure 3: Nomenclature of accessories.......................................................................................5 Figure 4: Dimensions ......................................................................................
1 Preface The 8500 Industrial Portable Data Terminal is a robust, versatile, high performance terminal. It is specifically designed for all-day, everyday use as well as for data-intensive applications in harsh environments. This line of product comes with built-in Bluetooth wireless technology and allows for optional 802.11b/g modules, enabling all the time, anywhere applications and seamless real time sharing of performance.
2 Industrial 8500 Reference Manual Typographical Conventions Before you start using this manual, it is important to understand the terms and typographical conventions used in the documentation. The following kinds of formatting in the text identify special information. Formatting convention Type of Information Triangular Bullet (¾) Highlight features or subjects that stand out from the text. Special Bold Items you must select, such as menu options, command buttons, or items in a list.
3 CHAPTER 1 Introducing 8500 This chapter mainly explains the hardware parts and features of the 8500 terminal. In This Chapter 1.1 Product Highlights ....................................................... 3 1.2 Nomenclature............................................................... 4 1.3 Features........................................................................ 7 1.4 Unpacking the package................................................ 20 1.5 Options...........................................
4 Industrial CPT-8500 Reference Manual 1.2 Nomenclature 1.2.
Chapter 1 Introducing 8500 1.2.
6 Industrial CPT-8500 Reference Manual 1.2.
Chapter 1 Introducing 8500 7 1.3 Features 1.3.1 Power ¾ Main Battery The 8500 is powered by a rechargeable 3.7 V/4000 mAh Li-ion battery pack, and it takes approximately four hours to fully charge it. During normal operation, the terminal can work for up to 500 hours. For power saving purpose, always turn off the backlight while working in a well-lit area. When the backlight is on for extended periods of time, the main battery will become low sooner than expected.
8 Industrial CPT-8500 Reference Manual ¾ Caution of Low Battery Charge The battery pack is the only power source for the terminal to work. It also charges the backup battery on the main board so that the data stored in SRAM can be retained properly. Therefore, when the main battery charge goes low, replace the battery pack with a charged one or charge it as soon as possible. Always save data before it is too late. Warning! Data loss may occur with SRAM during low battery condition.
Chapter 1 Introducing 8500 9 ¾ Caution of Data Loss When the main battery is removed or drained, the backup battery on the main board is to retain the contents of SRAM and maintain the running of the calendar for at least one week, on condition that the backup battery has already been fully charged. If the terminal is to be put away for a couple of days, you should be aware that data loss occurs when both the main and backup batteries discharge completely.
10 Industrial 8500 Reference Manual 24-key layout The layout of the 24-key keypad is similar to that of a telephone, which consists of an alphanumeric keypad, numbers and assorted characters. This keypad is set to numeric mode by default. For alpha mode, simply press [ALPHA] to toggle between alpha and numeric modes.
Chapter 1 Introducing 8500 11 44-key layout The layout of the 44-key keypad includes numeric, alphabetic, assorted characters, function and modifier keys. Figure 6: 44-key layout For the 44-key keypad, these keys can be categorized into the following groups by color: Blue Area: 9 Two [Enter] keys: user-friendly and convenient for either right-handed or left-handed operator to perform general function of a [Enter] key.
12 Industrial CPT-8500 Reference Manual Black Area: 9 Power key 9 Numeric keys 9 Modifier keys: [Shift] or [Alt] that modifies its next key. The functionality depends on software application. 9 Others like [Backspace], [ESC], [Space], [Tab], [Insert], [Delete], [ - ], [ . ] Yellow Area: 9 [Scan] button 9 Navigation keys for moving the cursor up, down, left, right. 9 Alphabetic keys 9 Others like punctuation keys for comma & semi-colon, dollar & colon.
Chapter 1 Introducing 8500 13 ¾ Backlight Setting The LED backlight of screen and keypad helps ease reading under dim environments. It can be alternately toggled ON and OFF by simultaneously pressing the following keys: 24-key: [Enter] + [FN] 44-key: [Enter] + [RED] ¾ Touch Screen & Signature Capture This LCD is also a touch screen, which enables the use of a stylus for handwriting.
14 Industrial 8500 Reference Manual 1.3.9 Readers A wide variety of readers is available for delivering flexibility to meet different requirements. Note: All specifications are subject to change without prior notice. Long Range Imager Resolution: 0.125 mm ~ 1.
Chapter 1 Introducing 8500 15 1.3.10 Wireless Support The 8500 terminal supports state-of-the-art wireless technologies so that it is able to send/receive data in real time in an efficient way. WPAN: IrDA, Standard infrared (IR) technology for data exchange, embedded WPAN: Bluetooth technology for cable replacement & data exchange, embedded WLAN: IEEE 80.211b for wireless networking, optional module Generally, the coverage of each technology can be viewed as follows.
16 Industrial CPT-8500 Reference Manual Standard IrDA Port The terminal has an integrated IrDA port at the bottom, which can directly establish connection with an IrDA device for printing or data exchange. Simply have the IrDA port of the terminal toward the IrDA port of the target device. IrDA specifications define communications (transmit/receive data) between two IrDA enabled devices within a very short range, line-of-sight.
Chapter 1 Introducing 8500 17 Bluetooth Class 2 With built-in Bluetooth technology, the terminal can directly communicate with any Bluetooth enabled device, not necessarily line-of-sight. Bluetooth is an industrial standard for Wireless Personal Area Networking (WPAN), which enables wireless communications within a short range. Serial Port Profile (SPP) is for ad-hoc networking, without going through any access point.
18 Industrial 8500 Reference Manual IEEE 802.11b/g When the 802.11b/g module is installed, the terminal can easily connect to legacy networks through access points (APs). Roaming among different networks is possible. IEEE 802.11b/g is an industrial standard for Wireless Local Area Networking (WLAN), which enables wireless communications over a long distance. The speed of connection between two wireless devices will vary with range and signal quality. To maintain a reliable connection, the 802.
Chapter 1 Introducing 8500 19 1.3.11 Resistance ¾ Shock The terminal is designed for harsh industrial environments, and is proved to survive drop test by the following criteria: Surface type: Concrete Distance to surface: 2 meters Drop times: multiple ¾ Splash & Dust The Ingress Protection (IP) rating is often used to indicate the protection afforded by enclosures of an electronic device, and an IP number specifies the protection level.
20 Industrial 8500 Reference Manual 1.3.13 Programming Support For easy development of applications, the terminal ships with development tool package. It includes a Windows-based application generator (AG) and relevant utilities. For development of complex custom applications, proprietary BASIC or C complier is available through licensing agreement, as well as libraries. 1.4 Unpacking the package The following items are included in the package.
21 CHAPTER 2 Installing 8500 The terminal is designed for portable use, and it almost requires no installation except installing the battery pack and necessary auxiliary parts. Warning! The use of any batteries or charging devices, which are not originally sold/manufactured by Syntech for its CipherLab product lines, will void your warranty and may cause damage to human body or the product itself. Here are some tips and suggestions that ensure safe and comfortable experience with the terminal.
22 Industrial 8500 Reference Manual ¾ Charging Make use of a serial cradle (RS-232). Make use of a modem cradle. Make use of a gang charger (charging up to four battery packs at the same time). ¾ Communications Wireless - make use of wireless technologies, embedded or added by module. Wired - make use of a cradle. In This Chapter 2.1 Battery Pack................................................................. 22 2.2 Hand Strap .......................................................
Chapter 2 Installing 8500 23 Figure 8: Installing battery pack 2.2 Hand Strap When a hand strap is necessary, install it to the terminal by following the steps: 1 Place the terminal face down on a flat and clean surface. 2 Screw one end of the hand strap to the shield-like cover on the back of the terminal. 3 Insert and hook the other end of the hand strap to the bottom of the terminal. 4 Make sure the hand strap is securely attached to the terminal.
24 Industrial 8500 Reference Manual Figure 9: Installing hand strap 2.3 Pistol Grip When a pistol grip is necessary, install it to the terminal by following the steps: 1 Place the terminal face down on a flat and clean surface. 2 Remove the shield-like cover on the back of the terminal by unscrewing. If there is a hand strap installed, remove it first. Keep the cover and screws for future use when the pistol grip is not desired.
Chapter 2 Installing 8500 25 Figure 10: Installing pistol grip 2.4 Cradle, serial or modem For charging and communications at the same time, a cradle is necessary. 1 Place the cradle in a flat and clean surface. 2 Connect the line of the power adaptor to the power jack on the back of the cradle. 3 Connect the power adaptor to a suitable power outlet. 4 The cradle is ready for charging.
26 Industrial 8500 Reference Manual 5 If data communications are desired at the same time, connection must be established as well. This depends on the cradle type. For example, below illustrates an RS-232 cable connected between a computer and the cradle. The interface between the terminal and the cradle is serial IR that can run data in a higher speed than IrDA. Note: Make sure the connection is made secured.
Chapter 2 Installing 8500 27 2.4.1 Cradle Options The choice of cradle can be very flexible. Choose a suitable type that best meets your needs. Note: The cradle is designed for communications and charging at the same time.
28 Industrial 8500 Reference Manual 2.4.2 Status Indicators ¾ Charging Status For main battery, view the screen of the 8500. For spare battery, see cradle LEDs. ¾ Communications & Port Status See cradle LEDs: RX, TX and Power.
Chapter 2 Installing 8500 29 2.4.3 DIP Switch The modem cradle (left) integrates a modem to the original serial cradle (right). Through toggling the DIP switch, the modem cradle can make use of the modem or RS-232 port for flexibility in connection.
30 Industrial 8500 Reference Manual 2.5 Charging 2.5.1 Cradle After being set up, the cradle is ready for charging the terminal (loaded with main battery) and one spare battery pack. Seat the terminal and/or the spare battery pack then. 2.5.2 Gang Charger If you have purchased the 4-bay gang charger, you can charge up to four batteries at the same time. This is particularly convenient for a non-stop operation or locations where a proper power supply is unavailable.
Chapter 2 Installing 8500 2.6.1 Wired The terminal is capable of wired communications via: Serial cradle Modem cradle See the following flow chart for instructions on the procedure.
32 Industrial 8500 Reference Manual ¾ Serial Cradle (RS-232) When the cradle is set up, 1 Connect one end of a RS-232 cable to the RS-232 port on the back of the cradle. 2 Connect the other end of the cable to the RS-232 port of a host computer. 3 See the flow chart for the rest steps. ¾ Modem Cradle When the cradle is set up, 1 For communications via an internal modem, slide the DIP switch on the back of the cradle to right. 2 Connect the telephone line to the [Line] jack on the back of the cradle.
33 CHAPTER 3 Software Architecture The software inside the terminal mainly consists of three modules: Kernel, System, and Program. Figure 15: Software Architecture In This Chapter 3.1 Program Module .......................................................... 34 3.2 System & Kernel Modules...........................................
34 Industrial 8500 Reference Manual 3.1 Program Module ¾ Preloaded Application The terminal is preloaded with a proprietary application program, that is, the AG Runtime (U8500*.SHX). After being physically set up and configured properly through the proprietary Application Generator (AG8500m.exe), the terminal is ready to collect data. The main menu is generated by the AG Runtime, U8500*.SHX.
Chapter 3 Software Architecture 35 3.2 System & Kernel Modules For system configurations and managing multiple programs, each terminal comes with the System Menu, Kernel Menu, and Program Manager. ¾ System Menu This is generated by the System module. You may configure parameters, test components, download or update the active application program (the one with the Program module), and download one custom font file. ¾ Kernel Menu This is generated by the Kernel module.
36 CHAPTER 4 Configuring 8500 This section mainly describes the alternatives to configure the 8500 terminal, including hardware configuration and downloading application programs. In This Chapter 4.1 System Menu ............................................................... 37 4.2 Program Manager ........................................................ 69 4.3 Kernel Menu ................................................................
Chapter 4 Configuring 8500 37 4.1 System Menu The System Menu is generated by a powerful utility, which offers an interface for engineers (programmers or system integrator) to view system information, change the configuration parameters, download programs and run diagnostics. This menu is designed for engineering tests and maintenance ONLY. For this reason, the System Menu provides password protection to prevent unauthorized users from accidentally changing system settings.
38 Industrial 8500 Reference Manual 4.1.1 Information The information provided here helps diagnose the system. H/W: Hardware version (PCB) S/N: Serial number of the terminal M/D: Manufacturing date KNL: Kernel version LIB (BSC): C library or BASIC run-time version USR: Application program version DEV: Code for optional hardware configurations, i.e.
Chapter 4 Configuring 8500 39 4.1.2 Settings Here provides options to change the default settings. System Settings Default Values Clock blank Backlight Period 20 seconds Auto Off 10 minutes Power On Options Program Resume Key Click Tone 2 System Password Open access Font System font ¾ Settings > Clock Set date and time for Real Time Clock. Enter two digits for the year, i.e. 04 for 2004.
40 Industrial 8500 Reference Manual ¾ Settings > Backlight Period Set the backlight duration for the keypad and LCD. Enter a value between 0 and 9999. ¾ Settings > Auto Off Set time threshold for the terminal to automatically power off when no operation is taking place during that specific period. Enter a value between 0 and 999. Note: To disable this function, enter 0.
Chapter 4 Configuring 8500 41 ¾ Settings > Key Click There is audible feedback for pressing a key on the keypad. The current value is highlighted. Select a tone for the buzzer or mute it. ¾ Settings > System Password Set a password to control user access to the System Menu. The password consists of eight characters at most. Note: To disable a previous password, enter blank on the following screens.
42 Industrial 8500 Reference Manual ¾ Settings > Font Current font information can be viewed here. Default: System font Custom font file, if there is one The font settings here can be changed if a "multi-language" font file has been downloaded. (Press [Up] or [Down] to move the cursor up or down through the menu of options.) ¾ Settings > Screen Calibration The cross mark will appear on the four corners of the screen for alignment.
Chapter 4 Configuring 8500 43 ¾ Settings > Reset to Default Reset all settings to the default values. The following dialog box prompts for confirmation.
44 Industrial 8500 Reference Manual 4.1.3 Tests Here provides functional tests for key parts. ¾ Tests > Reader Test the reading performance of the scanner, with laser or image scanning engine. Press [SCAN] to start. To stop and exit the test, press any key.
Chapter 4 Configuring 8500 45 ¾ Tests > Buzzer Test the buzzer with different frequency/duration combinations. Press [Enter] to start. Press any key to stop and exit the test. ¾ Tests > LCD & LED Test the LCD display and LED indicator. Press [Enter] to start. Press any key to stop and exit the test. ¾ Tests > Keyboard Test the rubber keys. Press any key and its corresponding character will be shown on the screen. Press [ESC] to stop and exit the test.
46 Industrial 8500 Reference Manual 4.1.4 Memory Here provides information and initialization function of the memory. ¾ Memory > Size information Base RAM (SRAM for data memory) Memory Card (SRAM for data memory) Flash (for program memory) Note: If memory card is present, it will replace Base RAM in use. ¾ Memory > Initialize Initialize the data memory, Base RAM or Memory Card. Warning! The contents of the data memory (SRAM) will be wiped out after memory initialization.
Chapter 4 Configuring 8500 47 4.1.5 Power Here shows current voltage consumption. Main: This refers to the main battery. It shows dynamic status of the battery pack, as the main power source. Backup: This refers to the backup battery. It shows dynamic status of the button cell, which is used to retain data in SRAM.
48 Industrial 8500 Reference Manual 4.1.6 Load Program Download program or font file to the active memory bank. New application program Program update Font file, i.e. multi-language font ¾ Results Success: the new program or font file will be activated right after downloading. Failure: the terminal will resume to the current application program or system font. Interface Cradle-IR The communication parameters at PC end should be set accordingly. IrDA Point to the target IrDA device.
Chapter 4 Configuring 8500 49 4.1.7 Bluetooth Menu This submenu is for the built-in Bluetooth technology to work with other Bluetooth enabled devices. Parameters must be configured correctly. Bluetooth Menu: Settings: Default Values Connect Setting Local Name blank Remote Name blank Broadcast Me Enable Power Saving Enable Authentication Disable PIN Code blank DHCP Enable SubNet Mask 255.255.128.0 Local IP Address 0.0.0.0 Default Gateway 0.0.0.0 DNS Server 0.0.0.
50 Industrial 8500 Reference Manual ¾ Bluetooth Menu > Information Information of network configuration can be viewed here. LIB (BSC): C library or BASIC run-time version MAC: MAC ID of the Bluetooth module IAM: A name given to the terminal for identification. CTY: “Normal” means frequency range is 2.4 ~ 2.5 GHz. There are bandwidth limitations for 2.4 GHz ISM band in some countries. For example, only 23 RF channels defined instead of 79 RF channels in Japan, Spain and France.
Chapter 4 Configuring 8500 51 ¾ Bluetooth Menu > Connect Setting A basic Bluetooth system can be configured as (1) point to point – SPP or DUN mode, and (2) point to multi-point – PAN mode. Set the following parameters if necessary. Local Name: Enter a name for identifying the terminal. Remote Name: Enter a name for making specific connection. The remote name must be one of those in the Freq. Dev. List. Otherwise, the terminal will fail to make connection with any device.
52 Industrial 8500 Reference Manual
Chapter 4 Configuring 8500 53 ¾ Bluetooth Menu > Security Set up or modify security parameters: Authentication: Options - Enable or Disable PIN Code: Define the encryption key values. Up to 13 characters, using ASCII code.
54 Industrial 8500 Reference Manual ¾ Bluetooth Menu > Echo Tests Echo tests are used for verifying connectivity to make sure the terminal is within coverage. Press [ESC] to stop and exit the test. For PAN mode, it helps estimate the number of APs and terminals, and determine the topology of deploying APs. “SPP”: Serial Port Profile - for ad hoc networking, without going through any access point. “Dial Out”: For Dial-Up Networking Profile, also known as DUN.
Chapter 4 Configuring 8500 SPP Master: 55 Set the terminal as a master device. It is to be followed by an attempt to make connection. SPP Slave: Set the terminal as a slave device. It is to be followed by an attempt to make connection. Dial Out Set the terminal as a modem. It is to be followed by an attempt to make connection with the target device. The target device may be a mobile phone or Bluetooth modem.
56 Industrial 8500 Reference Manual PAN(BNEP) Client: Set the terminal as a client. Enter the IP address of a server that connection is desired. It is to be followed by an attempt to make connection with APs. PAN(BNEP) Server: Set the terminal as a server. It is to be followed by an attempt to make connection with APs.
Chapter 4 Configuring 8500 57 ¾ Bluetooth Menu > Pairing Test The pairing procedure is for the creation and exchange of a link key between two Bluetooth-enabled devices. The devices use the link key for future authentication when exchanging information. After inquiry, there will be a “Target Machine” menu for selecting mode: Serial Port (SPP) Access Point (PAN) Dial Up Network (DUN) Press [ESC] to stop and exit the test.
58 Industrial 8500 Reference Manual ¾ Bluetooth Menu > Freq. Dev. List After completing the pairing procedure, the system will generate a list of device/s that the terminal has been connected to lately. During roaming or rebuild the connection, the terminal will automatically connect to the listed device(s) without going through the pairing procedure. Note: To un-pair any device, simply delete the device from this list. SPP mode (Serial Port Profile): Only one device listed for quick connection.
Chapter 4 Configuring 8500 59 ¾ Bluetooth Menu > Network Setting Set network parameters: DHCP: Options - Enable or Disable SubNet Mask: Enter a new Mask IP, if necessary. Local IP Address: Enter a new address for the terminal, if necessary. Default Gateway: Enter a new address for the default Gateway, if necessary. DNS Server: Enter a new address for the DNS server, if necessary. Domain Name: The domain name of the host is shown here.
60 Industrial 8500 Reference Manual
Chapter 4 Configuring 8500 61 4.1.8 IEEE 802.11b/g Menu This submenu is for IEEE 802.11b/g wireless networking. Parameters must be configured correctly. Note: This menu is available only when the 802.11b/g module is installed. 802.11b/g Menu: Settings: Default Values Network Setting DHCP Enable SubNet Mask 255.255.128.0 Local IP Address 0.0.0.0 Default Gateway 0.0.0.0 DNS Server 0.0.0.
62 Industrial 8500 Reference Manual ¾ 802.11b/g Menu > Information Information of network configuration can be viewed here. MAC: MAC ID of the 802.11b/g module DHCP: DHCP being enabled or disabled IP: IP address of the terminal Mask: Subnet Mask Gate: Default Gateway ¾ 802.11b/g Menu > Network Setting Set general network parameters. DHCP: Options - Enable or Disable SubNet Mask: Enter a new Mask IP, if necessary.
Chapter 4 Configuring 8500 63 ¾ 802.11b/g Menu > WLAN Setting 802.11b/g system can operate in two modes (1) Ad-hoc mode: peer-to-peer, and (2) Infrastructure mode: point to multi-point through access points. Set the following parameters. Local Name: Enter a name for identifying the terminal. Domain Name: The domain name of the host is shown here. SS ID: This refers to Service Set ID or Identifier.
64 Industrial 8500 Reference Manual
Chapter 4 Configuring 8500 ¾ 802.11b/g Menu > Security Set up or modify security parameters: Authentication [1] Open System: Default authentication type [0] Share Key: This requires implementing WEP key.
66 Industrial 8500 Reference Manual WEP Menu WEP Setting: Enable or Disable (for Share Key, it must be enabled.
Chapter 4 Configuring 8500 67 ¾ 802.11b/g Menu > Echo Tests Echo tests are used for verifying connectivity to make sure the terminal is within coverage. Client Mode: Set the terminal as a client. Enter the IP address of a server that connection is desired. It is followed by an attempt to make connection with APs.
68 Industrial 8500 Reference Manual Server Mode: Set the terminal as a server. It is followed by an attempt to make connection with APs.
Chapter 4 Configuring 8500 69 4.2 Program Manager The 8500 terminal supports multiple applications and languages. In the menu of Program Manager, it can download up to seven programs and one of them is made active. Warning! The Program Manager menu is NOT for the use of any end users.
70 Industrial 8500 Reference Manual 4.2.1 Download Multiple application programs can be downloaded through a variety of interfaces. Here brings a full list of programs that are currently stored on the terminal with size information (program name of 12 characters; size in kilo bytes). A suffix letter after the memory bank (01~06) indicates the file type of program.
Chapter 4 Configuring 8500 71 Figure 16: Downloading through Program Manager ¾ Memory Bank 01 ~ 06 Only application program can be downloaded to these banks. Empty bank: Select an empty bank by pressing the corresponding number and then [Enter]. Select baud rate for downloading. Connect cable and wait connecting… To abort the action, press [ESC]. Then press [ESC] again to return to the menu. Occupied bank: If no available banks, you'll have to replace one program with the new one.
72 Industrial 8500 Reference Manual ¾ Active Memory Bank Only the application program and font file that need to be activated immediately can be downloaded to the active bank. The new font file may not be shown in the program list if application programs take all banks, but you can view font information in the System Menu. Active bank: Select the active program (may be an empty bank) by pressing the corresponding number (that is 7) and then [Enter].
Chapter 4 Configuring 8500 73 4.2.3 Upload You may duplicate any program or all in the terminal to a host computer or another terminal. ¾ One Program The procedures are similar to those for loading programs. ¾ All Programs The procedures are similar to those for loading programs.
74 Industrial 8500 Reference Manual 4.3 Kernel Menu The Kernel Menu resides in the innermost core of the system. It has the highest security and is always protected by the system. When the application program is corrupted and the System Menu fails, the Kernel Menu provides an access to fix the system. Warning! The Kernel Menu is NOT for the use of any end users.
Chapter 4 Configuring 8500 75 4.3.1 Kernel Information The information provided here helps diagnose the system. H/W: Hardware version (PCB) S/N: Serial number of the terminal M/D: Manufacturing date KNL: Kernel version DEV: Code for optional hardware configurations, i.e. 2400-1 2 4 Type of Reader Type of Wireless Module 0 0 RFID Module Reserved - 1 Keypad layout 0= none 0= none 0= none 0= 24-key 1= CCD 4= 802.
76 Industrial 8500 Reference Manual 4.3.2 Load Program Download program or font file to the active memory bank. New application program Program update Font file, i.e. multi-language font ¾ Results Success: the new program or font file will be activated right after downloading. Failure: the terminal will resume to the current application program or system font. Interface Cradle-IR The communication parameters at PC end should be set accordingly. IrDA Point to the target IrDA device.
Chapter 4 Configuring 8500 4.3.4 Test & Calibrate These tools are provided for manufacturing use. No user definition is allowed. Burn-In Test Calibrate RTC Base RAM Test Memory Card Test IR Test Bluetooth Test CF (CompactFlash) Test Scanner Test LCDTest 2D Test Warning! This is NOT for the use of any end users.
78 Industrial 8500 Reference Manual 4.3.5 Bluetooth Menu This submenu is the same as that under the System Menu except there is no Network Setting here. Moreover, the echo test for Bluetooth in Kernel mode is available for SPP (Serial Port Profile) only.
79 CHAPTER 5 Managing 8500 Depending on the application program downloaded to the terminal, managing the 8500 terminal at PC end can be very flexible and simple. Note: For details, please see relevant documents such as Programming Guide. In This Chapter 5.1 For proprietary applications......................................... 79 5.2 For custom applications............................................... 79 5.1 For proprietary applications For the preloaded application program (U8500*.
80 Industrial 8500 Reference Manual Specifications Power Main battery: Rechargeable 3.7 V, 4000 mAh Li-ion battery pack Backup battery: Rechargeable 3.
Managing 8500 Dimensions: 228 mm (L) x 89.5 mm (W) x 59.5 mm (H) Weight: Approx. 450 g 81 Approx.
