User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- USING MOBILE COMPUTER
- LEARNING SOFTWARE ARCHITECTURE
- SYSTEM MENU
- PROGRAM MANAGER & KERNEL
- SPECIFICATIONS
- DOWNLOAD UTILITY
- TROUBLESHOOTING
- CANNOT TURN ON WHEN PRESSING POWER KEY
- CHARGING ERROR
- BUZZER SEEMS NOT WORKING
- LED INDICATOR SEEMS NOT WORKING
- LCD TOUCH SCREEN SEEMS NOT WORKING
- KEYPAD SEEMS NOT WORKING
- VIBRATOR SEEMS NOT WORKING
- MOBILE COMPUTER SEEMS NOT WORKING
- CANNOT SCAN BARCODES
- CANNOT DECODE DATA AFTER SCANNING
- CANNOT TRANSMIT/RECEIVE DATA
- KEY REFERENCE TABLES
31
Chapter 1
Using mobile computer
RS-232 Interface Cable
Task RS-232 Cable + 5V Power Adapter
Charging 5 V charging from the adapter (Plug icon)
Communications If you have FORGE Appl ication Generator i nstalled on your PC, you may
use a down load utili ty t o recei ve da ta from your PC; or you can run
HyperTerminal.exe to receive data directly.
Cradle
Task Cradle Interface + 5V Power Adapter
Charging 5 V charging from the adapter (Plug icon)
Communications Depends on the cradle type and its associated settings —
USB
RS-232
Note: Battery ch arging stops wh en the temperature drops below 0°C or e xceeds 40°C .
It is recommended that the battery be charged at roo m temperature (18 °C to
25°C) for optimal performance.