User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- USING MOBILE COMPUTER
- LEARNING SOFTWARE ARCHITECTURE
- SYSTEM MENU
- PROGRAM MANAGER & KERNEL
- SPECIFICATIONS
- DOWNLOAD UTILITY
- TROUBLESHOOTING
- CANNOT TURN ON WHEN PRESSING POWER KEY
- CHARGING ERROR
- BUZZER SEEMS NOT WORKING
- LED INDICATOR SEEMS NOT WORKING
- LCD TOUCH SCREEN SEEMS NOT WORKING
- KEYPAD SEEMS NOT WORKING
- VIBRATOR SEEMS NOT WORKING
- MOBILE COMPUTER SEEMS NOT WORKING
- CANNOT SCAN BARCODES
- CANNOT DECODE DATA AFTER SCANNING
- CANNOT TRANSMIT/RECEIVE DATA
- KEY REFERENCE TABLES
91
Chapter 4
Program Manager & Kernel
4.1.3 UPLOAD
Backs up any or all of the programs stored on the mobile computer to a host computer or
another mobile computer. T his is h elpful f or clon ing sof tware bet ween mu ltiple mobile
computers.
Note: To cl one all of the programs, the target mobil e computer cannot have any oth er
program downloaded except the active one, which means its memory sector 1 ~ 6
must be empty!
For the uploading procedures, please see those of downloading programs as they are
similar.
The transm ission interfaces of “ USB Vi rtual COM ”, “S D Card ” a nd “USB V irtual
COM_CDC” are not available when “Terminal” is selected for the Target Machine.
The transmission i nterface “SD Card” isn’t available when “PC” is selected for the
Target Machine.
This screen is not available if you select
“2.All Programs” from the previous screen.