User's Manual

85
Chapter 4 Using 802.11 Radio
 Changing this setting requires suspend/resume of the mobile computer
to take effect.
Auth Server Type of authentication server being used for EAP authentication.
 Value:
Type 1 Cisco Secure ACS or another server that
uses PEAPv1 for PEAP with EAP-MSCHAPV2
(PEAP-MSCHAP)
Type 2 A different authentication server, such as
Juniper Networks Steel Belted RADIUS, that
uses PEAPv0 for PEAP-MSCHAP
 Default: Type 1
TTLS Inner Method Authentication method used within secure tunnel created by EAP-TTLS.
 Value:
Auto-EAP Any available EAP method
MSCHAPV2
MSCHAP
PAP
CHAP
EAP-MSCHAPV2
 Default: Auto-EAP
PMK Caching The type of Pairwise Master Key (PMK) caching to use with a WPA2
encryption type (alternative to WPA2 CCKM).
 Value: Standard or OPMK (opportunistic PMK)
 Default: Standard
TX Diversity How to handle antenna diversity when transmitting data to AP.
 Value:
Main Only Use main antenna only
Aux Only Use auxiliary antenna only
On Use diversity
 Default: On
RX Diversity How to handle antenna diversity when receiving data from AP.
 Default: On-start on Main
 This is a fixed setting; on startup, the main antenna is always used
Frag Thresh When packet size exceeds the set threshold, it becomes fragmented.
 Value: 256 ~ 2346
 Default: 2346 (bytes)
RTS Thresh When packet size exceeds the set threshold, RTS/CTS is required on link.
 Value: 0 ~ 2347
 Default: 2347 (bytes)