User's Manual

15
Chapter 1 Using the 9200 Mobile Compute
r
1.1.1. BATTERY STATUS INDICATIONS
The battery pack is the only power source for the mobile computer to work. Therefore,
when the main battery level goes low, you need to replace the battery pack with a
charged one or charge it as soon as possible. Most of all, you should backup important
data on a regular basis.
By looking at the battery status icon, you can tell the battery level remaining in the main
battery – the more the white bars, the more power in the main battery. Tap the top of
the screen to expand the title bar pull-down list, and then tap the battery icon to quickly
access the Power Settings. Refer to
Title Bar Drop-down List
.
Alternatively, you may go to Start Screen | Settings, and tap Power.
Battery Icon
Description
External power source is connected and main battery is charging.
Main battery level is 80% ~ 100%.
Main battery level is 60% ~ 79%.
Main battery level is 40% ~ 59%.
Main battery level is 20% ~ 39%.
Main battery level is very low (0% ~ 19%) and needs charging immediately.
Note: When the mobile computer is fully charged and battery level reaches 100%, the
battery icon will change from to .
Warning:
(1) Once the battery charge drops below 20%, the low battery notification will be
displayed on the screen.
(2) Data loss may occur with RAM during low battery condition. Always save data
before battery runs out of power or keep a fresh battery for replacement.
(3) Constant usage of the mobile computer at low battery level can affect battery life.
For maximum performance, recharge the battery periodically to avoid battery
drain out and maintain good battery health.