TERMINAL 9600
Copyright © 2009 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development this information may change without notice.
IMPORTANT NOTICES FOR USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FOR PRODUCT WITH LASER Per FDA and IEC standards, the scan engines described in this manual are not given a laser classification. However, the following precautions should be observed: CAUTION This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not stare into beam. SAFETY PRECAUTIONS RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The maximum level of Specific Absorption Rate (SAR) measured is 0.211 W/kg.
RELEASE NOTES Version Date 1.00b Sep. 21, 2009 1.00a Sep.
INTRODUCTION 9600 TERMINAL, running Windows CE 6.0 in palm size, is our new product line of rugged PDA-style TERMINAL. Light-weight, streamlined and ergonomic, it adds even more powerful and handy tools to delivering the flexibility in customization. Specifically designed to work as an industrial PDA, 9600 TERMINAL provides rich options of data collection, voice and data communications, long-lasting working hours, and so on.
9600 Mobile Computer Reference Manual 128 MB SDRAM to store and run programs, as well as store program data One microSD expansion slot for memory card Dual mode support — One scan engine (integrated barcode scanner/imager) plus one RFID reader Ambidextrous side triggers Total wireless solution — connectivity includes Bluetooth, 802.11b/g and GPRS /EDGE A 3.
錯誤! 尚未定義樣式。 INSIDE THE PACKAGE The following items are included in the package. Save the box and packaging material for future use in case you need to store or ship the TERMINAL. 9600 TERMINAL Rechargeable Li-ion battery pack Stylus Hand Strap USB charging & communication cable Universal power adaptor Product CD Quick Guide ACCESSORIES Rich choices of optional accessories are available for you to enhance the total performance of the TERMINAL.
QUICK START OVERVIEW Figure 1: Overview 5
9600 Mobile Computer Reference Manual INSTALLING HAND STRAP The hand strap is ideal for one-handed operation, which requires safe and convenient hold of the TERMINAL. Warning: Always make sure the hand strap is well hooked and attached before use. When the hand strap is desired, install it to the TERMINAL by following these steps: 1) Place the TERMINAL face down on a flat and clean surface. 2) Insert the free end of the strap through the slit and adhere to the strap itself.
Quick Start 5) Replace the side plate and tighten the screws. Figure 3: Inserting the microSD Card REMOVING MEMORY CARD If you wish to remove the memory card, simply use the stylus to push the card after removing the side plate. It will be rejected automatically. However, you need to use a pair of needle-nose pliers to fetch it out. INSERTING SIM CARD 1) Press for the TERMINAL to enter suspend mode. 2) Hold the TERMINAL still and remove the hand strap as well as the battery.
9600 Mobile Computer Reference Manual Figure 4: Inserting SIM Card CONNECTING HEADSET Connect the headset to the headset jack (2.5 mm DIA) at the bottom of the TERMINAL. You can use the headset for audio playback or communication via _Dialer, Messenger, etc. Bluetooth headset is supported, bringing you the freedom of cordless mobility. INSTALLING BATTERY When you first receive the package, the rechargeable functionality of the backup battery is turned off.
Quick Start Figure 5: Installing the Main Battery CHARGING & COMMUNICATIONS The main and backup batteries may not be charged to full for shipment. When you first receive the package, you will need to charge the main battery to full before using the TERMINAL. Instead of direct charging, you may use a cradle or charger to charge the TERMINAL or spare batteries. Note: For initial charging, it takes approximately 8 hours to fully charge the main battery.
9600 Mobile Computer Reference Manual Warning: It is recommended that the charging devices be operated at room temperature (18°C to 25°C) for optimal performance. The charging devices will not charge the battery when the temperature exceeds 40°C. Because the internal backup battery is constantly charged from the main battery, the initial charging requires inserting the battery pack to the TERMINAL and then connecting the TERMINAL for direct charging or via cradle.
Quick Start Figure 6: Using Cable USING CRADLE 1) Seat the TERMINAL in the cradle. 2) Connect the power supply cord to the power receptacle on the cradle. 3) Connect the other end of the power cord to a suitable power outlet. 4) Connect the USB charging & communication cable if data transmission is required. Refer to Using ActiveSync. Note: Make sure that you have Microsoft ActiveSync installed on your computer before you connect the cable from the cradle to your computer.
9600 Mobile Computer Reference Manual Figure 7: Using Cradle 12
Quick Start 13
Chapter 1 USING 9600 TERMINAL This chapter explains the features and usage of 9600 TERMINAL. IN THIS CHAPTER 1.1 Battery..................................................................... 15 1.2 Memory.................................................................... 17 1.3 Keypad..................................................................... 20 1.4 Touch Screen ............................................................ 23 1.5 Notifications.......................................................
9600 Mobile Computer Reference Manual 1.1.1 UNDERSTANDING THE BATTERY ICONS The battery pack is the only power source for the TERMINAL to work. It also charges the backup battery on the main board so that the data stored in SRAM can be retained properly. Therefore, when the main battery charge goes low, you need to replace the battery pack with a charged one or charge it as soon as possible. Most of all, you should backup important data on a regular basis.
Chapter 1 Learning Windows CE Basics 2. Tap the Schemes tab. (right above) 3. Select the desired power scheme and options for suspending operation when not in use. The system can be set to three different states to conserve power: User Idle state System Idle state Suspend state The time choices represent the amount of time that must pass before the system will switch to the next power conservation state. 1.2 MEMORY Read-only Memory (ROM) 1 GB flash memory for storing OS (Windows CE 6.
9600 Mobile Computer Reference Manual 1.2.1 CAUTION OF DATA LOSS When the main battery is removed or drained, the backup battery on the main board is to retain the contents of SRAM and maintain the OS in suspend mode for at least 24 hours, on condition that the backup battery has already been fully charged. If you want to put away the TERMINAL for a couple of days, you should be aware that data loss occurs when both the main and backup batteries discharge completely.
Chapter 1 Learning Windows CE Basics Double-tap My Device on the desktop, and then tap and hold the DiskOnChip icon. Select Properties from the pop-up menu. In the Properties tab, it displays the current capacity and usage of DiskOnChip. Note: The DiskOnChip is part of the onboard 1 GB flash memory. Because the flash memory is non-volatile, data or programs stored in DiskOnChip will not be erased after hardware reset. Go to Start | Settings | Control Panel and double-tap the Storage Manager icon.
9600 Mobile Computer Reference Manual 1.3 KEYPAD Silicon rubber has been chosen for their durability and prompt feedback. Note: Functionality of keys is application-dependent. The 29-key keypad includes alphanumeric, navigation, function keys, and so on. This keypad is set to numeric mode by default.
Chapter 1 Learning Windows CE Basics The 43-key keypad includes numeric, alphabetic, function and other modifier keys, as well as keys for navigation and assorted characters. SCAN END SEND Enter Reset Tab Backspace Shift Space Figure 9: 43-key Layout 1.3.1 KEYPAD SETTINGS The LED backlight of keypad is turned off by default. Press to toggle it from off to on, and vice versa.
9600 Mobile Computer Reference Manual The Character Repeat functionality is enabled by default. Go to Start | Settings | Control Panel and double-tap the Keyboard icon. You may cancel the check box to disable it. When enabled, tap, hold, and drag the slider for a desired Repeat Delay and Repeat Rate. 1.3.2 ALPHA KEY This alphanumeric keypad is set to numeric mode by default. The Alpha key serves as a toggle among numeric, alpha (lower-case alphabetic), and ALPHA (upper-case alphabetic) input modes.
Chapter 1 Learning Windows CE Basics Note: It is not necessary to hold down the [FN] key. Below is a list of the factory setting for a variety of key combinations. Key Combination Action , Move text up one screenful (Page Up) , Move text down one screenful (Page Down) , Move to the beginning of screen or document (Home) , Move to the end of screen or document (End) Toggle ON/OFF the backlight of keypad only Note: Press the [FN] key first, and then press the second key for a specific function. 1.
9600 Mobile Computer Reference Manual 3) Select one or both of the check boxes to automatically turn off the LCD backlight when using batteries or external power. From the appropriate list, select the amount of time the device should be idle before the backlight is turned off. 4) Tap the [Advanced] button. 5) In the Settings tab (right above), you can select the luminosity of backlight when it is set to be automatically turned on by pressing any key or tapping the screen.
Chapter 1 Learning Windows CE Basics Warning: DO NOT use any pointed or sharp objects to move against the surface of the screen. 1.5 NOTIFICATIONS 1.5.1 STATUS LED The tri-color LED on top is used to provide information on the charging status or wireless power status. The green LED is also used for "Good Read" while collecting data.
9600 Mobile Computer Reference Manual 1.5.2 AUDIO Buzzer The buzzer on the front can be programmed for status feedback. Its frequency and duration are software programmable. Speaker The mono speaker on the back can be used to play sounds for events in Windows and programs, or play audio files such as .WAV files. In addition, it can be programmed for status feedback. Headset A headset jack is provided, which is a 2.5 mm DIA stereo earphone jack with microphone input. Bluetooth headset is also supported. 1.
Chapter 1 Learning Windows CE Basics 1.7 CRADLES 1.7.1 CRADLE OPTIONS Item Description Remark A Charging slot for seating the TERMINAL B Charging slot for spare battery C LED Indicators (POWER, DATA, READY) D Cable Connector (USB or RS-232) E Power Jack F Line/Phone Jack Modem Cradle only G Ethernet Port (RJ-45) Ethernet Cradle only See table below. Figure 10: Charging & Communication Cradle 1.7.
9600 Mobile Computer Reference Manual INDICATORS The cradle provides three LED indicators on the front panel to indicate connection status.
Chapter 2 Learning Windows CE Basics Tap and hold an item to see a menu that enables tasks, such as cut, copy, rename, delete, etc. Tap and drag to select multiple items. Tap on the toolbar to close an active window, a dialog box, or a running application. If the button is not displayed, press [ESC] on the physical keypad. Tap on the toolbar to save the current settings and exit the application (or minimize the window in some applications).
9600 Mobile Computer Reference Manual 2.1.1 SUSPEND MODE Like your PDA, Pocket PC and most handheld devices, 9600 TERMINAL functions when it is turned on. This is because the Windows CE operating system eliminates the booting process and runs continuously. Turn On (= Resume from Suspend) Press for about 1 second to turn on the TERMINAL. Turn Off (= Suspend) Press for about 3 seconds to turn off the TERMINAL. Alternatively, you may select Suspend from the Start Menu.
Chapter 2 Learning Windows CE Basics 2.1.2 DESKTOP The desktop appears when the TERMINAL is turned on. Tap and hold anywhere blank on the screen to manage or configure the desktop. Alternatively, you may tap to the right of the taskbar, and then select Desktop. Note: To customize the desktop, tap anywhere blank on the desktop and select Properties. 2.1.
9600 Mobile Computer Reference Manual SIP button Switch Task button Status icons for various connections, minimized program windows, and so on. SIP Status Icons & Minimized Programs Note: To configure different connections, go to Start | Settings and select Network and Dial-up Connections. Icon Description See Also Tap it to switch to desktop or any task, such as a running Switch Task program or window. Tap it to change the input method.
Chapter 2 Learning Windows CE Basics It provides control of the power to the 802.11b/g and Power Management GPRS modules. Double-tap any of these icons to configure the power setting. It indicates the GPRS module is enabled. See GPRS status icon 錯誤! 找不到參照來源。 below. The GPRS connection has been opened. If it fails, the icon 6.2 GPRS Connection will be gone. If the icon persists, it means the GPRS connection is successfully established. Double-tap it to view status. Tap [Disconnect] if necessary.
9600 Mobile Computer Reference Manual 2.1.4 START MENU Tap the Start button on the taskbar to open the Start Menu. Start Menu Options Description Programs Provides access to available programs in the directory: \Windows\Programs Favorites Provides access to your favorites in the directory: \Windows\Favorites Documents Provides access \Windows\Recent Settings Provides access to to recent opened documents in the directory: Control Panel Network and Dial-up Connections Taskbar and Start Me
Chapter 2 Learning Windows CE Basics 2.1.5 INPUT METHODS Data entry can be performed by the following methods: Physical Keypad Type with the physical keypad. Data Capture Scan barcode or RFID tag in applications, e.g. WordPad, CipherLab's FORGE Application Generator, etc. Software Keypad Type or write using SIP (Soft Input Panel): Tap the SIP button on the taskbar to select a SIP mode or hide the input panel. In each mode, the characters appear as typed text on the screen.
9600 Mobile Computer Reference Manual 2.2 MANAGING PROGRAMS 2.2.1 QUICK LAUNCH A PROGRAM Tap the Start button to view the Start Menu. To quick launch a program, tap it from the Programs folder. Note: Alternatively, you may tap Start and select Run to run a specific program or open a document. If you wish to quick launch a new program, add it to the Programs folder: My Device\Windows\Programs. The program will become available in the Start Menu.
Chapter 2 Learning Windows CE Basics Tap to close an active window, a dialog box, or a running application. If the button is not displayed on the toolbar, press [ESC] on the physical keypad. to save the current settings and exit the application (or minimize the window in Tap some applications). If the button is not displayed on the toolbar, press [Enter] on the physical keypad. Note: Some programs, such as the Reader Configuration Utility (ReaderConfig.exe), may create an associated icon on the taskbar.
9600 Mobile Computer Reference Manual 3) Select which partnership to set up. If you want to synchronize data between the TERMINAL and your personal computer, select Standard Partnership; otherwise, select Guest Partnership. 4) Wait a few seconds for the TERMINAL to get connected (and synchronized if a Standard Partnership is selected). Note: For ActiveSync via Bluetooth, refer to Using Bluetooth. 2.3.
Chapter 2 Learning Windows CE Basics Alternative to Install New Programs (Copy & Paste) You may install a new program manually. 1. When connected, open the Microsoft ActiveSync window on your desktop computer. 2. Click the Explorer button from the toolbar. 3. Navigate to the target folder, e.g. the Programs folder (\Windows\Programs), depending on where you wish to access the program. 4. Navigate through file folders on your computer to find the new program (.CAB, .EXE, etc.) 5.
9600 Mobile Computer Reference Manual 2.3.3 EXPLORE DEVICE Add a Program to Start Menu 1. When connected, open the Microsoft ActiveSync window on your desktop computer. 2. Click the Explorer button from the toolbar. 3. Navigate through file folders to find the program you desire. 4. Right-click the program and select [Create Shortcut] from the pop-up menu. 5. Right-click the shortcut and select [Cut] from the pop-up menu. 6. Navigate to the Programs folder – My Device\Windows\Programs. 7.
Chapter 2 Learning Windows CE Basics To best protect your work, you should regularly back up information on your TERMINAL. You can perform a backup by during the ActiveSync operation. The backup file is stored on your desktop computer. Note: The CipherLab Backup Utility is provided for the same purposes, and will save the backup file to the DiskOnChip folder. 2.4 USING WINDOWS EXPLORER 2.4.1 ADD A PROGRAM TO START MENU 1) Go to Start | Programs and select Windows Explorer.
9600 Mobile Computer Reference Manual 5) Tap and hold anywhere blank on the screen to select [Paste Shortcut] from the pop-up menu. The new program will be added to the Programs folder. 6) Go to Start | Programs and the new program will appear now. 2.4.2 CREATE A NEW FOLDER 1) Go to Start | Programs and select Windows Explorer. 2) Navigate through file folders to find where you wish to create a new folder. 3) Tap and hold anywhere blank on the window and select [New Folder] from the pop-up menu.
Chapter 2 Learning Windows CE Basics 2.5 SYSTEM RESET Reset the TERMINAL when it stops responding to input. Software Reset: Simply press the [Reset] button. Hardware Reset: Press the [Reset] button and Warning: at the same time. Never perform hardware reset unless software reset cannot solve your problems. 2.5.1 SOFTWARE RESET (WARM REBOOT) Software reset, also known as a warm boot, will restart the TERMINAL and keep all the saved files.
9600 Mobile Computer Reference Manual Any line prefixed with a semicolon “;” is supposed to be a comment line only; otherwise it is an executable file or command and shall be executed (line by line). The line to execute a cabinet file (.cab) must be specified with two dots “. .” for the absolute path. For example, \DiskOnChip\cerdisp.exe :\DiskOnChip\ReaderConfig.exe ;\DiskOnChip\RF9600_CE.exe ..\DiskOnChip\cerdisp.cab :..\DiskOnChip\ReaderConfig.
Chapter 3 CONFIGURING 9600 TERMINAL In this chapter, a brief on the system settings is provided for your reference. The Application Manager is specifically designed for the administrator to manage the accessibility of applications and protect the integrity of the system on the TERMINAL.
9600 Mobile Computer Reference Manual 3.
Chapter 3 Configuring 9600 TERMINAL 1) Go to Start | Settings | Control Panel and select System to obtain essential system information. 2) Select the Device Name tab to change the identification for the TERMINAL.
9600 Mobile Computer Reference Manual 3.2.2 UNDERSTANDING DEVICE CONFIGURATION The device configuration of 9600 TERMINAL is displayed in 7 digits: xxxx-xxx Take the screenshot of System Properties above for example.
Chapter 3 Configuring 9600 TERMINAL Items Description In the [Certificates] dialog box, you may view or modify digital certificates that some application use to establish trust for secure connections. In the [Date/Time] dialog box, you may change date, time, and time zone settings. In the [Dialing Properties] dialog box, you may configure settings for modem communications, such as the GPRS modem. In the [Display Properties] dialog box, Background tab: Select an image for the background.
9600 Mobile Computer Reference Manual In the [Internet Options] dialog box, you may configure how the TERMINAL connects to the Internet. Connect an external keyboard to the TERMINAL or cradle via the USB host cable. In the [Keyboard Properties] dialog box, you may configure settings for character repeat. Connect a mouse to the TERMINAL or cradle via the USB host cable. In the [Mouse Properties] dialog box, you may configure and test your double-click settings.
Chapter 3 Configuring 9600 TERMINAL In the [Remove Programs] dialog box, you may remove any program that is installed earlier. In the [Storage Properties] dialog box, Storage Manager tab: You may reformat the available storage device, either the DiskOnChip folder or storage card. Actions include “Dismount the storage device”, “Format the storage device”, and “Set up disk partitions”. The Storage Manager is for the use of system administrators only.
9600 Mobile Computer Reference Manual 3.4 CONNECTION SETTINGS There are two ways to access the connections settings: Go to Start | Settings | Control Panel and select Network and Dial-up Connections. Go to Start | Settings | Network and Dial-up Connections. Ignore [Properties] as the associated settings will not take effect. Connections Description This is a shortcut to USB Connection, and the selected interface is USB for factory setting.
Chapter 3 Configuring 9600 TERMINAL This is the control of networking over USB cable. It is enabled automatically when the TERMINAL is connected to PC via USB cable. This is the control of Ethernet module AX88772. It is enabled automatically when the TERMINAL is seated in the Ethernet Cradle. When available, the connection status icon When connected, this icon will become will appear on the taskbar. . When disconnected, this icon will become again. This is a shortcut to GPRS connection.
9600 Mobile Computer Reference Manual Tap this button to toggle on/off the connection you its associated menu. select. The toggle is used for Enable/Disable or Connect/Disconnect. Tap this button to delete the connection you select. Tap this button to view the properties of the connection you select. 3.5 UPGRADING OS IMAGE You can upgrade the OS image on your TERMINAL either via microSD card or run the program "DLDR.exe" on the desktop of your computer.
Chapter 3 Configuring 9600 TERMINAL 2) Run the Image Tool “DLDR.exe” on your computer. 3) Press [Reset] + to perform hardware reset on 9600. 4) Seat 9600 in the cradle. + 5) Press your computer. on 9600 to start the download process. It will try to connect to 6) In the Image Tool, it will show 9600 has been connected successfully. Go to WINCE Image | Download, and select the desired image file (*.nb0).
9600 Mobile Computer Reference Manual It will take approximately 5 minutes before a message is displayed on the TERMINAL to indicate the OS upgrade is completed successfully. It will then perform hardware reset on 9600 automatically. Warning: 56 Do not press any key on the TERMINAL while upgrading OS image. Upon completion, you cannot reload any older image.
Chapter 3 Configuring 9600 TERMINAL 57
Chapter 4 USING 802.11 RADIO Summit Client Utility, also referred to as SCU, lets you configure and connect to network wirelessly. IN THIS CHAPTER 4.1 Turn On Wi-Fi Power .................................................. 59 4.2 Summit Client Utility .................................................. 60 4.1 TURN ON WI-FI POWER 1) Double-tap the associated icon 2) Select [Wi-Fi Power ON] and tap Warning: on the taskbar to access Power Management. . When both GPRS and 802.
9600 Mobile ComputerReference Manual 4.2 SUMMIT CLIENT UTILITY Profile settings are radio and security settings that are stored in the registry as part of a configuration profile. When a profile is selected as the active profile, the settings for the profile become active. You may create, rename, edit, and delete profiles, as well as alter global settings that apply to every profile or to SCU itself. For more detail on the profile settings, please go to http://www.summitdatacom.com/documentation.
Chapter 4 Using 802.11 Radio Active Profile Profile settings are radio and security settings that are stored in the registry as part of a configuration profile. When a profile is selected as the active profile, the settings for the profile become active. Information on the Active Profile is displayed. Item Description Active Profile Options are “Default”, “ThirdPartyConfig”, and custom profiles.
9600 Mobile ComputerReference Manual created. If such list does not exist, tap [List] to select the profiles in use. When the facility is active and the radio is not associated to an access point, SCU runs through the list and tries each profile one by one until the radio associates to an access point using the values in a profile. The profile becomes the Active Profile and remains so until the radio disassociates or disconnects from the network.
Chapter 4 Using 802.11 Radio By default, the file name is “SummitSettings.sdc”. Export to: Export global settings, all standard SCU profiles, and the special profile “ThirdPartyConfig” from the SCU area of the registry to a file. Import from: Import global settings, all standard SCU profiles, and the special profile “ThirdPartyConfig” from a file (created using the Export facility above) to the SCU area of registry.
9600 Mobile ComputerReference Manual 4.2.2 PROFILE EDITING Any changes made to a profile will not be saved until you tap [Commit]. Edit Profile By default, information of the profile “Default” is displayed. Select a profile from the drop-down menu and configure the Radio settings, Encryption, EAP Type, and so on. For example, select “SSID” from the Radio list and enter a preferred name for the network.
Chapter 4 Using 802.11 Radio is ON and AP defines maximum transmit power for client as lower value Value: Maximum (Maximum power defined for the current regulatory domain) or the specified value in milliwatts (50, 30, 20, 10, 5, 1) Default: Max Bit Rate Bit rate used by the radio when interacting with AP; however, if a specified bit rate is selected, the radio will not connect to an AP unless the specified SSID is configured for only the selected bit rate.
9600 Mobile ComputerReference Manual User: Username or Domain\Username (up to 64 characters) Password (up to 32 characters) EAP-FAST Credentials values for EAP-FAST User: Username or Domain\Username (up to 64 characters) Password (up to 32 characters) PAC Filename (up to 32 characters) PAC Password (up to 32 characters) PEAP-MSCHAP Credentials values for PEAP-MSCHAP, PEAP-GTC, EAP-TLS PEAP-GTC User: Username or Domain\Username (up to 64 characters) EAP-TLS Password (up to 32 characters) “Validate ser
Chapter 4 Using 802.11 Radio Tap [New] and enter a unique name for this profile. Up to 32 characters are allowed. Configure the Radio settings, Encryption, EAP Type, and so on. Define up to 20 profiles, not including the special profile “ThirdPartyConfig”. Rename Select a profile from the drop-down menu and tap [Rename]. Enter a unique name for this profile. Up to 32 characters are allowed. Delete Select a profile from the drop-down menu and tap [Delete]. You cannot delete the Active Profile.
9600 Mobile ComputerReference Manual Tap to update the list. Select one SSID and tap to create a new profile. Enter credentials or keys if necessary.
Chapter 4 Using 802.11 Radio 4.2.3 CONNECTION STATUS View status of the current wireless network connection, information on the access point and the connection established between the two.
9600 Mobile ComputerReference Manual 4.2.4 DIAGNOSTICS Perform troubleshooting and diagnostic tests if necessary. (Re)connect Disable and enable the radio, apply or re-apply the current profile, attempt to associate and authenticate to the wireless network, and log all activity in the output area at the bottom.
Chapter 4 Using 802.11 Radio the bottom. Start Ping Start a continuous ping to the address in the edit box next to the button. Once the button is tapped, its name and function will change to [Stop Ping]. Pings will continue until you tap the [Stop Ping] button, move to an SCU window other than Diags or Status, exit SCU, or remove the radio. Also, it log all activity in the output area at the bottom.
9600 Mobile ComputerReference Manual Ping Status Diagnostics Attempt to (re)connect to an access point, and provide a more thorough dump of data then is obtained with (Re)connect. The dump will include radio state, profile settings, global settings, and a BSSID list of APs in the area. Save to Save the diagnostics output to a file. By default, the file name is “sdc_diags.txt”.
Chapter 4 Using 802.11 Radio 4.2.5 GLOBAL SETTINGS Global settings include radio and security settings that apply to all profiles and settings that apply to SCU itself.
9600 Mobile ComputerReference Manual Aggressive Scan Aggressive scanning complements and works in conjunction with the standard scanning that is configured through the Roam Trigger, Roam Delta, and Roam Period settings. It is recommended that aggressive scanning is enabled unless there is significant co-channel interference because of overlapping coverage from APs that are on the same channel.
Chapter 4 Using 802.11 Radio Default: 2347 (bytes) LED N/A Tray Icon Whether to enable the system tray icon or not — Value: On, Off Default: On Hide Passwords Whether to hide the passwords and other sensitive information, such as WEP keys, in SCU as well as EAP authentication dialog boxes — Value: On, Off Default: Off Admin Password N/A Auth Timeout (s) Specifies how long it will wait for an EAP authentication request to succeed or fail.
9600 Mobile ComputerReference Manual The Summit system tray icon provides a visual status for the radio and enables the user to launch Summit Client Utility by tapping the icon. It is only available when all of the following is true: A Summit radio is present. The power to the radio is turned on through Power Management. Windows Zero Config (WZC) is NOT active. The global setting of the SCU Tray Icon is turned ON (the default setting).
Chapter 5 USING BLUETOOTH Bluetooth Manager lets you configure the Bluetooth settings and use the Bluetooth services provided on the remote devices. IN THIS CHAPTER 5.1 5.2 5.3 5.4 5.5 5.6 5.7 Turn on Bluetooth Power............................................. Search Devices.......................................................... Pair Devices .............................................................. File Transfer.............................................................. Object Push ...........
9600 Mobile Computer Reference Manual Note: You may need to stop using the Bluetooth services at times, in order to conserve battery power, or in situations where the use of radio is prohibited, such as on airplanes, in hospitals, etc. 5.1.1 BLUETOOTH TOOLBAR Buttons Description Tap this button to view the Bluetooth devices discovered during this session. If you tap the button for the first time, it will start the inquiry process to discover nearby Bluetooth devices.
Chapter 5 Using Bluetooth 5.1.2 SET DISCOVERABLE Cancel the check box to hide the TERMINAL from other Bluetooth devices. 5.2 SEARCH DEVICES 1) Tap to discover nearby Bluetooth devices.
9600 Mobile Computer Reference Manual 2) Wait for a few seconds, and it will list the discovered devices. 3) If you do not see the device that you want to connect to, make sure it is set discoverable. Tap 80 to search again.
Chapter 5 Using Bluetooth 5.3 PAIR DEVICES 5.3.1 IDENTIFY REMOTE DEVICE From the device list, tap and hold the desired device to select [MAC address] from the pop-up menu. 5.3.2 PAIR When authentication is enabled on the remote device, you will have to exchange a passkey (= pair) with it before starting a connection.
9600 Mobile Computer Reference Manual 1) From the device list, tap and hold the desired device to select [Pair] from the pop-up menu. 2) Enter the PIN code that is specified on the remote device. (right above) 3) Once paired successfully, the paired device will be displayed along with a lock icon " ".
Chapter 5 Using Bluetooth 4) Double-tap the remote device to find out the available Bluetooth services. 5) Tap and hold a desired Bluetooth service. Select [Connect] or [Push File] from the pop-up menu.
9600 Mobile Computer Reference Manual 5.4 File Transfer 5.5 Object Push 5.6 Serial Port Service 6) Once the connection has been established, the connected service will be displayed along with a plug icon " ".
Chapter 5 Using Bluetooth 5.3.3 UNPAIR From the device list, tap and hold the desired device to select [Unpair] from the pop-up menu. Note: The TERMINAL must be unpaired on the remote device as well. For example, remove it from the device list on PC. (Both devices must be unpaired!) 5.4 FILE TRANSFER 1) Tap and hold the File Transfer service.
9600 Mobile Computer Reference Manual 2) Select [Connect] (and assign COM port if necessary). 5.4.1 UPLOAD A FILE 3) Tap and hold anywhere blank to select [Put File] from the pop-up menu. 4) Choose the file you wish to upload to the remote device. 5) The TERMINAL will start uploading the file to the remote device.
Chapter 5 Using Bluetooth 5.4.2 DOWNLOAD A FILE 6) Tap and hold a desired file to select [Get File] from the pop-up menu. The TERMINAL will start downloading the file from the remote device.
00 Mobile Computer Reference Manual 5.5 OBJECT PUSH 1) Tap and hold the Object Push service. 2) Select [Push file] to send a file. 3) Choose a file you wish to send. 4) The TERMINAL will start sending the file.
Chapter 5 Using Bluetooth 5.6 SERIAL PORT SERVICE 5.6.1 SERIAL PORT SERVICE 1) Tap and hold the Serial Port Service. 2) Select [Connect] (and assign COM port if necessary).
9600 Mobile Computer Reference Manual 3) Once the connection has been established, the connected service will be displayed along with a plug icon " ". 5.6.2 BLUETOOTH ACTIVESYNC For ActiveSync via Bluetooth, tap and hold Serial Port Service to select [ActiveSync via BT] from the pop-up menu.
Chapter 5 Using Bluetooth 5.7 MANAGE LOCAL SERVICES By default, File Transfer and Object Push services are made available, and therefore, displayed along with a plug icon “ ”. 5.7.1 FILE TRANSFER Change Local Path You can change the FTP folder. Tap and hold it to select [Change Local Path] from the pop-up menu.
9600 Mobile Computer Reference Manual Unload/Load Service You can unload or re-load the service. When unloaded, it becomes unavailable to a remote device. 5.7.2 OBJECT PUSH Change Local Path You can change the exchange folder for Object Push. Tap and hold it to select [Change Local Path] from the pop-up menu.
Chapter 5 Using Bluetooth Unload/Load Service You can unload or re-load the service. When unloaded, it becomes unavailable to a remote device. 5.7.3 SERIAL PORT SERVICE Unload/Load Service You can unload or re-load the service. When unloaded, it becomes unavailable to a remote device.
9600 Mobile Computer Reference Manual Unload/Load Service You can unload or re-load the service. When unloaded, it becomes unavailable to a remote device.
Chapter 6 USING GPRS 9600 TERMINAL allows making phone calls or connecting to network over General Packet Radio Service (GPRS). Insert SIM card before turning on the power to GPRS module. Refer to Inserting SIM Card. Warning: When both GPRS and 802.11b/g are enabled on battery power, the main battery charge will drop down substantially. IN THIS CHAPTER 6.1 Turn On GPRS Power............................................... 95 6.2 GPRS Connection .......................................................
9600 Mobile Computer Reference Manual Note: The PIN verification on the TERMINAL only allows two attempts because the system will always process the default number first (= "1234" for factory setting). Unless it matches the PIN code of your SIM card, you will have to manually input the correct PIN code. If you succeed, the PIN code you input will overwrite the factory setting and become the default PIN code.
Chapter 6 Using Reader Configuration Utility 6.2 GPRS CONNECTION 6.2.1 CONNECTING TO GPRS MODEM 1) Go to Start | Settings | Network and Dial-up Connections. 2) Tap and hold "GPRS" to select [Connect] from the pop-up menu. 3) If your dial-up configuration is correct, tap the [Connect] button in the Dial-Up Connection dialog box. Refer to 6.2.2 Configuring Dialing Properties. Note: You must connect to the GPRS modem specified by the mobile phone operator.
9600 Mobile Computer Reference Manual 6.2.2 CONFIGURING DIALING PROPERTIES If you need to configure the dial-up settings, tap the [Dial Properties] button in the Dial-Up Connection dialog box. Note: Alternatively, you may go to Start | Settings | Control Panel and select Dialing.
Chapter 6 Using Reader Configuration Utility 6.2.3 CONFIGURING GPRS PROPERTIES 1) Go to Start | Settings | Network and Dial-up Connections. 2) Tap and hold "GPRS" to select [Properties] from the pop-up menu. 3) As long as SIM card is present, the default GPRS modem will appear as shown below. Tap [Configure].
9600 Mobile Computer Reference Manual 4) Select the Call Options tab. The special modem commands inserted into the dial string must be [+CGDCONT=1,,"AP name"]. For example, change "INTERNET" below to the name of your GPRS AP.
Chapter 7 Using Reader Configuration Utility Chapter 7 USING READER CONFIGURATION UTILITY Reader Configuration Utility is the tool that lets you manage the barcode and RFID readers integrated on the TERMINAL. Note: Before executing ImageMaker.exe. the utility, make sure you have closed the program IN THIS CHAPTER 7.1 7.2 7.3 7.4 7.5 7.6 Run ReaderConfig.exe ...............................................101 Barcode Reader Settings............................................
9600 Mobile Computer Reference Manual If the RFID Reader is installed, the option will be available. 3) To meet your application requirements, proceed to configure associated reader settings as well as barcode settings. Note: (1) The ReaderConfig.exe utility will automatically detect the reader module(s) that is currently installed in the TERMINAL. (2) If you wish to reload the default settings, delete the ReaderCfgINI.txt file in DiskOnChip or tap [Restore Defaults] on the General tab.
Chapter 7 Using Reader Configuration Utility 7.2 BARCODE READER SETTINGS The barcode reader configurations depend on the scan engine(s) installed. You can tell which reader is currently in use and make necessary changes on the General tab. Barcode Reader Description CCD/Laser Reader If installed, tap the [Barcode Reader] button to configure the reader settings for CCD or Laser scan engine. Refer to the Reader Settings Table in Appendix II - 錯誤! 找不到參照來源。.
9600 Mobile Computer Reference Manual Some RFID tags support both read/write operations, on a page-by-page basis. You may find it necessary to define your own read/write operation. For reference only, the table below lists the start page for read/write operation on a number of RFID tags.
Chapter 7 Using Reader Configuration Utility 7.4 DATA OUTPUT Tap the [Data Output] button on the General tab to choose from the three options for data output after decoding as well as configure associated settings. Default Data Output Keyboard Emulation Data is emulated as typed text and sent to the active Window. Local machine When “Local machine” is selected, simply run your application or built-in program, such as WordPad, to start with data collection.
9600 Mobile Computer Reference Manual Windows Message When selected, a Windows message will be broadcasted after Disable decoding. Intercept the decode message in your application. Call Windows API (ReadMsgQueue) in your application to retrieve the decoded data. Windows Event When selected, a Windows event will be broadcasted after Disable decoding. Intercept the decode event in your application. Call Windows API (ReadMsgQueue) in your application to retrieve the decoded data.
Chapter 7 Using Reader Configuration Utility 7.5 NOTIFICATIONS (FOR GOOD READ) Tap the [Notifications] button on the General tab to configure how you want to be notified of a successful decoding. Sound / Vibration Default Good Read via speaker Mute, or Sound 1~9 Sound 1 Good Read via buzzer Specify frequency and duration 0 (= Disable) Good Read via vibrator 0~30 (sec.) Duration 0~255 (0.1 sec.
9600 Mobile Computer Reference Manual Refer to Appendix I - 錯 誤 ! 找 不 到 參 照 來 源 。 for the symbologies or RFID tags supported by a scan engine. Refer to the Symbology Settings Table in Appendix II - 錯誤! 找不到參照來源。. Refer to the Symbology Settings Table in Appendix III - 錯誤! 找不到參照來源。.
Chapter 7 Using Reader Configuration Utility 109
Chapter 8 SPECIFICATIONS PLATFORM, PROCESSOR & MEMORY Operating System Microsoft Windows CE 6.0 CPU Intel PXA270 at 520 MHz Memory ROM 1 GB non-volatile NAND flash memory RAM 128 MB on-board SDRAM memory Ordering Option - 256 MB on-board SDRAM memory Expansion Slot One microSDHC card slot COMMUNICATIONS & DATA CAPTURE Communications USB Host/Client USB 1.1 Specification WPAN Built-in module for Bluetooth version 2.0 Class 2 connectivity WLAN Built-in module for 802.
9600 Mobile Computer Reference Manual ELECTRICAL CHARACTERISTICS Batteries Main Battery Pack Rechargeable Li-ion battery – 3.7 V, 2700 mAh Backup Battery Rechargeable Lithium battery – 3.7 V, 80 mAh Data retention for at least 24 hours Power Adapter Input AC 100~240 V, 50/60 Hz Output DC 5 V, 3 A (Charging & Comm.
Specifications ENVIRONMENTAL CHARACTERISTICS Temperature Operating -10 °C to 50 °C Storage -20 °C to 60 °C Humidity Operating 10% to 90%, non-condensing Storage 5% to 95%, non-condensing Resistance Impact Resistance 1.
115
