User's Manual

97
Chapter 6 Using Reader Configuration Utility
6.2 GPRS CONNECTION
6.2.1 CONNECTING TO GPRS MODEM
1) Go to Start | Settings | Network and Dial-up Connections.
2) Tap and hold "GPRS" to select [Connect] from the pop-up menu.
3) If your dial-up configuration is correct, tap the [Connect] button in the Dial-Up
Connection dialog box. Refer to 6.2.2 Configuring Dialing Properties
.
Note: You must connect to the GPRS modem specified by the mobile phone operator.
4) After you tap the [Connect] button, the GPRS status will go through opening port,
user authenticated, device connected until it is connected finally.
The status icon
will appear on the taskbar to indicate the GPRS connection has
been established successfully. If you want to disconnect, double-tap the icon and tap
the [Disconnect] button.