User's Manual

9600 Mobile Compute

Reference Manual

CONNECTING HEADSET

Connect the headset to the headset jack (2.5 mm DIA) at the bottom of the TERMINAL.

You can use the headset for audio playback or communication via _Dialer, Messenger,

etc.

 Bluetooth headset is supported, bringing you the freedom of cordless mobility.

INSTALLING BATTERY

When you first receive the package, the rechargeable functionality of the backup battery

is turned off. It is controlled by a DIP switch inside the battery compartment as shown

below. For shipping and storage purposes, save the TERMINAL and the main battery in

separate packages, and adjust the DIP switch to the OFF position (bottom). This will keep

both batteries in good condition for future use.

Note: Any improper handling may reduce the battery life.

1) Remove the hand strap.

2) Hold the TERMINAL still and press the release button to unlock the battery cover.

3) Slide off the battery cover.

4) Use the stylus (or a sharp-pointed object, such as a pencil) to adjust the DIP switch

to the ON position. (top) Now the internal backup battery can be charged by the main

battery.

5) Insert the battery pack into the battery compartment at a proper angle (30°~45°) so

that the metal contacts on the battery are met with the charging contacts inside the

compartment. Make sure that the battery is snugly fit into the compartment.

6) Slide the battery cover back onto the TERMINAL until it clicks into place.

7) If the battery is charged, the TERMINAL turns on. If the TERMINAL does not turn on,

charge the battery.

Figure 4: Inserting SIM Card