User's Manual

9600 Mobile Compute

Reference Manual

Warning: It is recommended that the charging devices be operated at room

temperature (18°C to 25°C) for optimal performance. The charging devices

will not charge the battery when the temperature exceeds 40°C.

Because the internal backup battery is constantly charged from the main battery, the

initial charging requires inserting the battery pack to the TERMINAL and then connecting

the TERMINAL for direct charging or via cradle. This will have both the main and backup

batteries charged at the same time. It takes at least 48 hours to fully charge the backup

battery. However, it is not necessary to fully charge the backup battery for the TERMINAL

to work.

Note: (1) To charge the backup battery, make sure that you slide the DIP switch inside

the battery compartment to the ON position.

(2) In order to charge the backup battery to full, you must insert the main battery

and leave it for at least 48 hours, whether the TERMINAL is in use or not.

USING WIRELESS NETWORKS

The TERMINAL supports state-of-the-art wireless technologies, Bluetooth and 802.11b/g,

so that it is able to send/receive data in real time in an efficient way. You may choose to

have the GPRS module embedded for a total wireless solution for data and voice

communications. Refer to the associated utilities.

USING CABLE

1) Connect the USB charging & communication cable.

Note: Tighten the two screw-in connectors to secure the cable.

2) Join the power supply cord to the power receptacle on the cable connector.

3) Connect the other end of the power cord to a suitable power outlet.