User's Manual

15
This chapter explains the features and usage of 9600 TERMINAL.
IN THIS CHAPTER
1.1 Battery..................................................................... 15
1.2 Memory.................................................................... 17
1.3 Keypad..................................................................... 20
1.4 Touch Screen ............................................................ 23
1.5 Notifications.............................................................. 25
1.6 Data Capture ............................................................ 26
1.7 Cradles .................................................................... 27
錯誤! 找不到參照來源。 ............................... 錯誤! 尚未定義書籤。
1.1 BATTERY
 Main Battery
9600 TERMINAL is powered by a rechargeable 3.7 V/2700 mAh Li-ion battery pack,
and it takes approximately 4 hours to fully charge it. However, the charging time may
vary by working condition. During normal operation, the TERMINAL can work for up to
10 hours.
 Backup Battery
The backup battery on the main board takes charge when the main battery is
removed or drained out. When fully charged, the 3.7 V/80 mAh rechargeable Lithium
button cell helps retain data in SRAM and maintain the system running in suspend
mode for at least 24 hours without the main battery. In the meantime, you have to
replace the main battery as soon as possible.
Warning: The battery cover must be in position; otherwise, the TERMINAL cannot
turn on. For a new battery, make sure it is fully charged before use.
Always prepare a spare battery pack, especially when you are on the road.
Chapter 1
USING 9600 TERMINAL