User's Manual

9600 Mobile Compute

Reference Manual

3) Select one or both of the check boxes to automatically turn off the LCD backlight

when using batteries or external power. From the appropriate list, select the amount

of time the device should be idle before the backlight is turned off.

4) Tap the [Advanced] button.

5) In the Settings tab (right above), you can select the luminosity of backlight when it is

set to be automatically turned on by pressing any key or tapping the screen. Tap,

hold, and drag the slider for AC and battery powered respectively. For more

luminosity, move the slider to the right.

1.4.2 RE-CALIBRATING THE SCREEN

This LCD is also a touch screen that can be calibrated through screen alignment.

1) Go to Start | Settings | Control Panel and double-tap the Stylus icon.

2) Tap the Calibration tab, and then tap the [Recalibrate] button.