User's Manual

52
9600 Mobile Compute
r
Reference Manual
3.4 CONNECTION SETTINGS
There are two ways to access the connections settings:
 Go to Start | Settings | Control Panel and select Network and Dial-up
Connections.
 Go to Start | Settings | Network and Dial-up Connections.
Connections
Description
This is a shortcut to USB Connection, and the selected interface is USB for factory
setting. This connection is reflected in the control panel for direct PC connection:
Start | Settings | Control Panel |
The USB connection is specifically for performing the ActiveSync operation via the
USB or RS-232 charging & communication cable. Generally, it will automatically
establish the connection and start the ActiveSync operation when you seat the
TERMINAL in the cradle. To stop the ActiveSync operation, simply remove the
TERMINAL.
Alternatively, you may double-tap the status icon
from the taskbar and tap
[Disconnect].
 When connected, the status icon will appear on the taskbar.
 When disconnected, this icon will disappear.
Ignore [Properties] as the associated
settings will not take effect.