User's Manual

54
9600 Mobile Compute
r
Reference Manual
Tap this button to toggle on/off the connection you
select. The toggle is used for Enable/Disable or
Connect/Disconnect.
Tap this button to delete the connection you select.
Tap this button to view the properties of the
connection you select.
its associated menu.
3.5 UPGRADING OS IMAGE
You can upgrade the OS image on your TERMINAL either via microSD card or run the
program "DLDR.exe" on the desktop of your computer. Please contact your sales
representative for the OS upgrade utility "DLDR.exe".
The OS upgrade should be performed with great caution because everything on the
TERMINAL will be erased.
Warning: Backup user-installed applications and files to your computer first.
3.5.1 SD DOWNLOAD
The SD download method allows upgrading image from your microSD storage card.
1) Copy the image file to the root directory of your microSD storage card (“\SD Card”),
and rename it to “NK.nb0”.
2) Press [Reset] +
to perform hardware reset on 9600.
3) Press
+ to enter SD Download mode.
It will take approximately 5 minutes before a message is displayed on the TERMINAL
to indicate the OS upgrade is completed successfully.
4) Press [Reset] + to perform hardware reset on 9600 again.
Warning: Do not press any key on the TERMINAL while upgrading OS image. Upon
completion, you cannot reload any older image.
3.5.2 RUN DLDR.EXE
1) Install Microsoft ActiveSync on your computer. For initial ActiveSync operation, refer
to Using ActiveSync
for details.
Now, you must disable the ActiveSync operation as shown below.