Android™ 6.0, Marshmallow Mobile Computer 9700 Series Version 1.
PREFACE COPYRIGHT Copyright © 2017 CIPHERLAB CO., LTD. All rights reserved The information contained in this document, including all pictures, illustrations and software, is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties, with all rights reserved.
SAFETY NOTICES FOR PRODUCT WITH RF FUNCTIONS This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. FOR CANADA This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of Industry Canada.
SAFETY PRECAUTIONS RISK OF EXPLOSION: IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The use of any batteries or charging devices which are not originally sold or manufactured by CipherLab will void your warranty and may cause damage to human body or the product itself. DO NOT disassemble, incinerate or short circuit the battery. DO NOT expose the scanner or the battery to any flammable sources.
Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Antennas Only use the supplied antenna. Unauthorized antennas, modifications or change to the antennas could violate FCC regulations and void the user’s authority to operate the equipment. For operation within 5.15 ~5.25GHz /5.25 ~5.35GHz/5.47 ~5.
RELEASE NOTES Version Date Notes 1.01 Feb 20, 2016 Update 1.
CONTENTS PREFACE ............................................................................................... - 2 Copyright............................................................................................ - 2 Disclaimer........................................................................................... - 2 Trademark Recognition ........................................................................... - 2 Contact .........................................................................
INTRODUCTION Thank you for choosing CipherLab products. CipherLab introduces 9700 Series Mobile Computer. Powered by Android™ 6.0 Marshmallow, the mobile computer delivers better user experience and advances enterprise mobile computing. The mobile computer has transflective LCD to hold up the readability in a wide range of light conditions, courtesy of the supplementary backlight enabled by a built-in ambient light sensor.
FEATURES Rugged yet smoothened outlined IP65-rated tough form to survive drop, shock, heat, cold, and impervious to moisture/dust Android™ 6.0 Marshmallow OS, Cortex A53 2.
USE MOBILE COMPUTER Before the mobile computer takes part in your work, get to know it first. This chapter includes the basic features of the mobile computer including the power supply, memory, and the units that bridge users with the mobile computer. This chapter helps you set the mobile computer to work at the earliest.
1.1. TAKE A TOUR This section shows the major components on the mobile computer and inside battery chamber. You will also learn how to power on/off the mobile computer and how the mobile computer gives information about its status. 1.1.1. OVERVIEW 9 9 10 11 13 12 Figure 1: Overview No. Description No.
1.2. POWER ON/OFF MOBILE COMPUTER POWER ON To power on the device, press and hold the Power button show the home screen. . The device will opens to Note: For the device to power on, the battery cover must be secured in place. POWER OFF To power off the device, press and hold Power button for more than three seconds. An onscreen button will appear on-screen which allows you to power off the device. Make sure all user data and tasks have been stored before tapping Power off.
1.3. NOTIFICATIONS The mobile computer features visible, audible, and tactile feedback to draw users’ prompt awareness of the mobile computer’s contiguous events such as barcode reading, wireless/mobile data connections, and battery charging. STATUS LED Three LED lights are located on the upper-right corner of the mobile computer.
SPEAKER The mobile computer has a speaker on the back for audio signaling and playback. The speaker sounds for system events, application warnings, on-screen item selection and physical keypad stroke. In noisy environments, the speaker remains efficacious with the help of a Bluetooth headset. The speaker also sounds for successful barcode reading, which can be controlled on the Reader Config Notification Settings page. VIBRATOR The mobile computer owes its tactile feedback to the vibrator built inside.
1.4. BATTERY The 9700 mobile computer is fed by two batteries, main battery pack and backup battery. The main battery is removable and replaceable from the battery chamber while the backup battery is mounted on the main board inside the mobile computer. When the mobile computer is shipped, the main battery is stored in a package separated from the mobile computer, which keeps it in good condition for future use.
1.4.1. INSTALL/REMOVE MAIN BATTERY Follow the steps below to install the main battery: Place the main battery pack into the battery chamber with the contact pins facing down. Fix the upper end first, and press the lower end down until the battery “clicks” into place. Figure 2: Install main battery Follow the steps below to remove the main battery: 1) A battery latch is located at the lower end of the main battery. Push the latch down and the battery will be released.
1.4.2. CHARGE BATTERIES Due to shipment, it is likely that the main battery and backup battery won’t be fully charged when you receive the package. Before setting the mobile computer to work, charge the main battery to full by direct charging via a power adapter (with the help of a Snap-on Charging & Communication Cable). Some key facts about charging batteries: Charging Time Main battery: It takes approximately 4 hours to charge the 3.3V, 3600mAh main battery, and approximately 6 hours to charge the 3.
The following guides how to charge batteries. DIRECT CHARGING USING SNAP-ON CABLE Direct charging of the mobile computer relies on the Snap-on Charging & Communication Cable (hereinafter “snap-on cable”). There is a power jack on the connector of this cable to connect external power. Prior to charging, install the main battery as described in Install/Remove Main Battery. Then follow the steps below: 1) Attach the snap-on cable to the mobile computer.
SPECIFICATIONS PLATFORM, PROCESSOR & MEMORY Operating System & CPU OS Version Android™ 6.0, Marshmallow CPU Cortex A53 2.0 GHz Processor Memory RAM 2GB DDR SDRAM Flash 16GB Flash ROM Expansion Slot One expansion slot, supports MicroSDHC up to 32GB COMMUNICATIONS & DATA CAPTURE Communications USB Host/Client USB 2.0 WPAN Built-in module for Bluetooth version 2.1 + EDR Class II connectivity +BLE WLAN Built-in Cisco© CCX v4 certified module for 802.
ELECTRICAL CHARACTERISTICS Batteries Main Battery Pack Standard capacity battery: 3.7V, 3600 mAh Large capacity battery: 3.7V, 5400 mAh Rechargeable Li-ion battery Charging time: approximately 4 hours for standard battery / 6 hours for large capacity battery Backup Battery 3.
PHYSICAL CHARACTERISTICS Color Tap Screen Display Display 3.5” Transflective 65K Color TFT-LCD Resolution VGA 480 (W) x 640 (H) Keypad Layout Numeric keypad (30-key), Numeric & Function keypad (38-key), or Alphanumeric keypad (53-key) Backlight White LED backlight for display and keypad Notifications Status LED Three LEDs for showing scanning good read, radio connection status and battery charging status Audio Vibrator 0.45G force Integrated with speaker and microphone 2.
ENVIRONMENTAL CHARACTERISTICS Temperature OperatingNote -20 °C to 50 °C / -4°F to 122°F Storage -30 °C to 70 °C / -22°F to 158°F (without battery) -30 °C to 60 °C / -22°F to 140°F (with battery) Charging 0 °C to 35 °C / 32°F to 95°F (with battery) Humidity Operating 5% to 95%, non-condensing (Max 60°C / 140°F) Storage 5% to 95%, non-condensing (Max 60°C / 140°F) Resistance Impact Resistance Multiple 1.8 m (5.9 ft.
