Windows Embedded Handheld 6.5 CP60 / CP60G Version 0.
PREFACE COPYRIGHT Copyright © 2012 CIPHERLAB CO., LTD. All rights reserved The information contained in this document, including all pictures, illustrations and software, is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties, with all rights reserved.
SAFETY NOTICES FOR HAND-HELD PRODUCT WITH RF FUNCTIONS CP60 serial handheld equipment uses wireless radios that have been designed and manufactured to meet safety requirements for limiting exposure to radio waves. When used in accordance with the instructions set forth in this manual, the equipment has been independently verified to not exceed the emission limits for safe exposure to radio frequency (RF) energy as specified by EN50360 of EEC.
SAFETY PRECAUTIONS RISK OF EXPLOSION: IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The use of any batteries or charging devices, which are not originally sold or manufactured by CipherLab, will void your warranty and may cause damage to human body or the product itself. DO NOT disassemble, incinerate or short circuit the battery. DO NOT expose the scanner or the battery to any flammable sources.
DECLARATION OF CONFORMITY Manufacturer European information CIPHERLAB Co., Ltd. CipherLab GmbH 12F., 333, Dunhua S. Rd., Sec. 2 Taipei, Taiwan 106, R.O.C. Tel: +886 2 8647 1166 http://www.cipherlab.com Willicher Damm 145 41066 Mönchengladbach, Germany Tel: +49 2161 56230 http://www.cipherlab.
RELEASE NOTES Version Date Notes 0.
CP60 Mobile Computer Reference Manual CONTENTS PREFACE ............................................................................................... - 2 Copyright............................................................................................ - 2 Disclaimer........................................................................................... - 2 Trademark Recognition ........................................................................... - 2 Contact .................................
CP60 Mobile Computer 1.8. 1.8.1. 1.8.2. 1.8.3. 1.8.4. 1.8.5. 1.8.6. 1.8.7. 1.9. 1.9.1. Reference Manual Direct Data Connection ........................................................... 41 Use Cable ............................................................................ 41 Use Cradle................................................... ᙑᎄ! ࡸࡳآᆠ᧘Ζ Syncing Tools ....................................................................... 42 Sync Partnership ................................................
CP60 Mobile Computer 4.1.3. 4.1.4. 4.1.5. 4.1.6. 4.1.7. 4.2. 4.2.1. 4.2.2. 4.2.3. 4.2.4. 4.2.5. 4.2.6. 4.2.7. 4.2.8. 4.2.9. 4.2.10. 4.3. 4.3.1. 4.3.2. 4.3.3. 4.3.4. 4.3.5. 4.3.6. 4.3.7. 4.3.8. 4.3.9. 4.3.10. 4.3.11. 4.3.12. 4.3.13. 4.4. 4.4.1. 4.4.2. 4.4.3. 4.4.4. 4.4.5. 4.5. 4.5.1. 4.5.2. 4.5.3. 4.6. 4.6.1. 4.6.2. Reference Manual Enable/Disalbe Mobile Data ...................................................... 94 Use Only 2G Networks .............................................................
CP60 Mobile Computer Reference Manual SPECIFICATIONS....................................................................................... 133 Platform, Processor & Memory ................................................................... 133 Communications & Data Capture ................................................................ 133 Electrical Characteristics .......................................................................... 134 Physical Characteristics ...................................
INTRODUCTION Thank you for choosing CipherLab products. CipherLab welcomes another Windows Embedded by introducing CP60 Series Mobile Computer. Powered by Windows Embedded Handheld 6.5, the mobile computer delivers better user experience and promises enterprise mobile computing. The mobile computer has transflective LCD to hold up the readability in a wide range of light conditions, courtesy of the supplementary backlight enabled by a built-in ambient light sensor.
CP60 Mobile Computer Reference Manual FEATURES Rugged yet smoothened outlined, with hand strap for secure hold IP65/67-rated tough form to survive drop, shock, heat, cold, and impervious to moisture/dust. Windows Embedded Handheld 6.5 OS, TI DM3730 1GHz CPU 512MB SDRAM to run application programs 4GB NAND flash to store OS, applications, settings and so on. Storage expansion: Up to 32GB MicroSDHC.
Chapter 1 USE MOBILE COMPUTER Before the mobile computer takes part in your work, get to know it first. This chapter combs the basic features of the mobile computer including the power supply, memory, and the units that bridge users with the mobile computer. This chapter helps you set the mobile computer to work at the earliest. 1. 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 IN THIS CHAPTER Take A Tour ................................................................ 4 Power On....................................
CP60 Mobile Computer Reference Manual 2.1. TAKE A TOUR This section shows the major components on the mobile computer and inside battery chamber. You will also learn how to power on/off the mobile computer and how the mobile computer gives information about its status. 2.1.1. OVERVIEW Figure 1: Overview No. Description No.
Chapter 1 Use Mobile Computer 2.1.2. INSIDE BATTERY CHAMBER Inside the battery chamber of the mobile computer are the sockets for SIM card and storage card. Each is equipped with a hinged cover. Battery chamber SIM card slot SD card slot Figure 2: Inside Battery Chamber 2.1.3. BEFORE INITIAL USE Prior to using the mobile computer for the first time, it is recommended to apply the protective film over the LCD.
CP60 Mobile Computer Reference Manual 2.2. POWER ON MOBILE COMPUTER To power on the mobile computer, press the Power button the keypad. sitting at the upper right of This Power button is also a suspend button. Press without holding this button to suspend the mobile computer when you are not actively using it. Press it again to wake the mobile computer from suspension. See Suspend Mobile Computer for details.
Chapter 1 Use Mobile Computer 2.3. NOTIFICATIONS The mobile computer features visible, audible, and tactile feedback to draw users’ prompt awareness of the mobile computer’s contiguous events such as barcode reading, wireless/mobile data connections, and battery charging. STATUS LED Three LED lights are located on the upper-right corner of the mobile computer.
CP60 Mobile Computer Reference Manual Same as the speaker and LED light, the vibrator works for good barcode reading. CipherLab’s utility Reader Config enables users to turn the vibration on/off and decides the duration. The vibrator is also programmable. See the API library that is provided for your reference.
Chapter 1 Use Mobile Computer 2.4. BATTERY The mobile computer is fed by two batteries, main battery pack and backup battery. The main battery is removable and replaceable from battery chamber while the backup battery is mounted on the main board inside the mobile computer. When the mobile computer is shipped, the main battery is stored in a package separated from the mobile computer, which keeps it in good condition for future use.
CP60 Mobile Computer Reference Manual To install main battery pack, follow through the steps below by referencing to the illustrations: Figure 4: Main Battery Setup 10
Chapter 1 Use Mobile Computer 1) Loosen the handstrap and pull it downwards so the metal hook is positioned at the lower edge of the Velcro band 2) Unhook the hand strap by pressing the square metal ring lightly in the middle and lifting it upwards in a single motion. Note: The lower end of the handstrap can be left as is without detaching. After the main battery is installed, the handstrap can be hooked back into place. 3) On the outer sides of the battery door are two door latches.
CP60 Mobile Computer Reference Manual 2.4.2. CHARGE BATTERIES Due to shipment, it is likely that the main battery and backup battery won’t be fully charged when you receive the package. Before setting the mobile computer to work, charge the main battery to full by direct charging via a power adapter (with the help of a Snap-on Charging & Communication Cable or Charging & Communication Cradle).
Chapter 1 Use Mobile Computer To output data to your PC or laptop, connect the snap-on cable (either USB or RS-232 format) to it. See Direct Data Connection for follow-ups. When data transmission is required.
CP60 Mobile Computer Reference Manual 2.4.3. MONITOR BATTERY LEVEL Main battery is the only source that feeds the mobile computer to work. It also supplies the backup battery on main board to retain the data stored in DRAM. Hence when main battery level gets low, recharge it or change it as soon as possible. But foremost, back up the important data from time to time to protect your work. MAIN BATTERY LEVEL The O.S. features a few icons for user’s immediate awareness of main battery level.
Chapter 1 Use Mobile Computer Main battery isn’t being charged. Main battery is being charged. Power amount delivered enables more accuracy. The horizontal graphic bar shows coarse power amount. in percentage LOW BATTERY ALERTS When main battery level drops below 40% , the mobile computer prompts “Main Battery Low” for a recharge. When further reduced to under 20%, the mobile computer prompts “Main Battery Very low” to solicit your immediate transaction.
CP60 Mobile Computer Reference Manual Note: Constant usage of the mobile computer at low battery level can affect battery life. For maximum performance, recharge the battery periodically to avoid battery drain out and maintain good battery health. When main battery drains out entirely, the mobile computer shuts down automatically. Backup battery takes over to hold DRAM data for 30 minutes if it is fully charged. When this occurs, replace main battery pack immediately.
Chapter 1 Use Mobile Computer LOW BATTERY ALERT When backup battery drops low, the mobile computer prompts for recharge with a dialog. And Title Bar shows an icon. Backup battery is rechargeable by external power (through power adapter) or main battery pack. An alert icon shows on Title Bar Backup Battery Very Low Low backup battery puts DRAM data in great danger. Always save data from time to time or keep a fully charged battery at hand for replacement.
CP60 Mobile Computer Reference Manual 2.4.5. OPTIMIZE BATTERY LIFE Power issues are critical for portable devices. Always turn off the features you don’t need on the mobile computer to save power. To extend battery life as long as possible, always take the following actions: Suspend the mobile computer when it isn’t actively used. (See Suspend Mobile Computer.
2.5. TEXT INPUT The mobile computer has a physical keypad and a touchscreen to receive user’s input. Among the two, the touchscreen provides more intuitiveness than the physical keypad to interact with the device. This section shows how to input text using physical keypad and onscreen keyboard. To know how to touch-control the mobile computer, see Touch Control. 2.5.1.
CP60 Mobile Computer Reference Manual Figure 8: Enhanced Keys Enhanced keys can be categorized to five groups and explicated as follows: Key Group Description ACTION KEYS “Action keys” are Scan key and Backlight key. They cause the mobile computer to deliver functions as below: Key Press Reads barcodes Scan Key Turns on/off screen backlight. Backlight Key O.S. KEYS The following tabulates O.S. keys and their functions.
Chapter 1 Use Mobile Computer application-dependent and they all team up with key to cause actions from the active application. They produce nothing when pressed alone. [ALPHA] KEY key changes keypad input mode. When key is pressed once, [alpha] mode is activated temporarily, and the LED indicator next to the physical key lights up in blue accordingly. This mode will end after a single key has been pressed.
CP60 Mobile Computer Key Tab Reference Manual Description Opens the previous screen worked on. Closes a menu of an application, or an opened dialog. Navigates among the highlight items in some applications. Enters Tab character, which means it moves the caret to the next tab stop. Executes a command or confirms input. For text input, it inserts a break between paragraphs. Backspace Space Shift Erases the characters to the left of caret. Inserts a blank space where caret is.
Chapter 1 Use Mobile Computer typed key as a symbol. Input mode returns to default once a key is pressed. Press Keypad enters all typed keys as symbols. Input twice to enter this mode. mode pressing returns Press Keypad enters the first typed key as a capitalized alphabetic letter. Press mode. Keypad enters the first typed key as a capitalized alphabetic letter. Press once and this mode. Input mode returns to default once a key is pressed.
CP60 Mobile Computer 1) Reference Manual To enter a single letter, press key once so additionally to trigger enter the letter in uppercase, press Shift key To enter multiple letters, press Additionally press Shift key key twice so once to activate in uppercase, or press it twice to activate in uppercase. 2) appears on the Title Bar. To mode. appears on the Title Bar.
Chapter 1 Use Mobile Computer QWERTY KEYPAD CHARACTER KEYS QWERTY keypad also arranges its character keys in the lower half and features them in a compact “QWERTY” layout as its name suggests. QWERTY keypad is a pared down version of an average laptop’s keyboard that bears also an key, Tab key , Enter key , Backspace key , Shift key , and space key . QWERTY keypad enters alphabetic characters by default. To enter numbers and some key. See [Alpha] Key for more details.
CP60 Mobile Computer Reference Manual Description Key key Performs a special operation from O.S. or the active application when pressed in conjunction with another key. key Changes the function of the key pressed together with. The launched function depends on the application. Backspace Erases the characters to the left of caret. Executes a command or confirms input. For text input, it inserts a break between paragraphs. Space Tab Shift Inserts a blank space where the caret is.
Chapter 1 Use Mobile Computer number/symbol. Keypad enters all typed keys as numbers/symbols. Input mode returns to default once a key is pressed. Press twice to enter this mode. Input mode returns default by again. pressing For details about to key, see [Alpha] Key. TEXT INPUT To enter text using QWERTY keypad: Literal Input The QWERTY keypad enters lowercase letters a-z by default when neither nor Shift key is pressed.
CP60 Mobile Computer Reference Manual 2.5.2. ONSCREEN KEYBOARD The O.S. provides users with an onscreen keyboard. Compared to physical keypads, the onscreen keyboard bears more likeness to a conventional laptop’s keyboard by all the modifiers keys arranged on the left edge and the “QWERTY” layout. The onscreen keyboard isn’t overshadowed by physical keypads at all but outdoing them by being able to enter a series of diacritics for European languages.
Chapter 1 Use Mobile Computer The desired performance will be produced to the active application or screen at the moment. Modifier keys are explicated as following Key Description Ctrl key and causes a special action from O.S. or Once tapped, it becomes color-inverted the active application when a character key is tapped. It quits once the said action is triggered or when it is tapped again.
CP60 Mobile Computer Input modifier Reference Manual and presents a series of accented vowels Once tapped, it becomes color-inverted such as ä, æ, ë, ï, ö, ú or letter variants such as ß and ç which are needed for European languages. It quits once a character key is tapped. Tap key on onscreen keyboard. M N key becomes color-inverted Then tap a character key. . Letter variant “ß” is entered. Once an accented vowel or letter variant is entered, the onscreen keyboard restores to English keyboard.
Chapter 1 Use Mobile Computer Lowercase Uppercase OTHER KEYS Key Description Tab key Navigates among the highlight items in some applications. For text input, it inserts Tab character, which means it moves caret to the next tab stop. Backspace Erases the characters to the left of caret. Enter key Executes a command or confirms input. When text input, it inserts a break between paragraphs. Nav Move caret in an input field.
CP60 Mobile Computer Reference Manual A list of suggested words briefly display over the keyboard Dictionary suggestions CHANGE KEYBOARD ORIENTATION The mobile computer is built-in with a G-sensor and supports screen orientation, which is enabled by default. So when the mobile computer turns sideways or upright, the screen changes its orientation, and onscreen keyboard readjusts itself to the new orientation.
Chapter 1 Use Mobile Computer SELECT TEXT When you see some text on a page you want to copy, select it first. Selecting texts varies from application to application. But primarily it requires you to tap & hold somewhere on the text to open a context menu or open the applications’ option menu which provide commands to select a text. To select a text: 1) Tap & hold somewhere on the text. A context menu comes up. 2) Tap the command that makes selection. 3) Select the desired text.
Chapter 1 Use Mobile Computer 2.6. TOUCH CONTROL The mobile computer’s LCD is overlaid by a resistive touch panel and thus forms a resistive touchscreen. Since a resistive touchscreen locates the user’s touch by the force applied on it, by operating with the stylus one can apply minimum force to trigger actions from the touchscreen. Touch control is one of the main ways to interact with the mobile computer.
Chapter 1 Use Mobile Computer Backlight’s Battery Power tabbed page 1.6.3. CALIBRATION A resistive touchscreen needs calibration to work accurately after serving for a period of time. Calibration aligns the coordinates of touch panel and the LCD underneath to improve touch accuracy. To calibrate touchscreen: 1) Tap Windows icon on Softkey bar or hit physical Windows key . Start screen opens. 2) Tap Settings | System | Screen . Screen settings open showing Alignment tabbed page.
CP60 Mobile Computer Reference Manual 3) Tap Align Screen button. Screen alignment application opens. 4) Accurately tap on the centers of each cross mark to show consecutively onscreen, 5 in total. 5) Follow through the calibration.
Chapter 1 Use Mobile Computer 2.7. MEMORY The mobile computer packs the following memory units to retain data and instructions from users: Random-access Memory (RAM) 512 MB SDRAM for temporary storage and fast access of active applications. SDRAM is fed by backup battery to hold data. Internal Storage 4GB flash memory to store O.S. (Windows Embedded Handheld 6.5), application files, settings, and other data used by applications.
CP60 Mobile Computer Reference Manual System Information page Tap to view information on memory size INTERNAL STORAGE On Start screen, tap Settings | System | Memory . Memory screen opens showing Main tabbed page. This page gives the information about the mobile computer’s use of RAM and internal storage. Main tabbed page delivers two labels – Storage and Program: Storage - Internal memory for files storage, such as O.S., applications and the files needed for applications.
Chapter 1 Use Mobile Computer EXTERNAL STORAGE When Memory screen opens, tap Storage Card tab. Storage Card tabbed page then opens and shows the info about external storage (when a storage card is inserted).
CP60 Mobile Computer Reference Manual 2.7.3. INSERT SD CARD Day-to-day use of the mobile computer might cause the available internal storage to run short. Equip the mobile computer with an external memory unit to expand storage capacity. Follow the steps below to install a SD card: 1) Power off the mobile computer. 2) Place the mobile computer face-down on a flat and soft surface. 3) Remove the battery door and main battery pack as described in Main Battery Setup. Battery chamber is opened.
Chapter 1 Use Mobile Computer 2.8. DIRECT DATA CONNECTION “Direct” data connection means “hardwired” data connection between the mobile computer and a Windows-based PC as opposed to wireless connection. Direct data connection relies on a RS-232 cable or a USB cable (sometimes plus an auxiliary cradle) between the two mentioned devices. Once the mobile computer and PC are “directly” connected with each other by a RS-232 or USB-cable, they can sync data with each other. 2.8.1.
CP60 Mobile Computer Reference Manual 1.8.2. SYNCING TOOLS Microsoft’s syncing tools enables users to update or back up the data on their handheld computers to desktop computers. Two syncing tools are featured by Microsoft - ActiveSync and Windows Mobile Device Center (hereinafter “WMDC”). Which tool to use depends on which OS is running on your PC. See the rule below: O.S.
Chapter 1 Use Mobile Computer 3) On your PC, run the syncing program. ActiveSync should detect the mobile computer. Sync Setup Wizard launches and prompts to set up “Sync Partnership” between two computers ActiveSync Sync Setup Wizard opens. Press Next to set up “Synchronization Relationship”. Press Cancel to create “Temporary Relationship” by which the mobile computer works as a “guest” to the PC.
CP60 Mobile Computer Reference Manual 4) Press Next button for “Synchronization Relationship”, or press Cancel button for “Temporary Relationship” if you don't plan to connect to the PC on a regular basis. If you have pressed Next, follow the onscreen instructions to go through the setup of “Synchronization Relationship”. Once setup finishes, ActiveSync opens showing “Synchronizing”. Two computers are synchronized.
Chapter 1 Use Mobile Computer 2.8.5. DISCONNECT USB ACTIVESYNC To disconnect USB ActiveSync: 1) On your PC, open ActiveSync by double-clicking its icon in the notification area. ActiveSync opens. 2) From the menu bar, click File | Connection Settings. [Connection Settings] window opens. 3) Deselect Allow USB connections. 4) Press the OK button to apply the change and quit setting.
CP60 Mobile Computer Reference Manual 2.8.6. ACTIVESYNC ACTIONS TO TAKE Once “Synchronization Relationship” or “Temporary Relationship” is established between two computers, a variety of actions can be taken to enhance resource sharing between them as previously mentioned in Sync Partnership. In summary, “Synchronization Relationship” outshines “Temporary Relationship” by being capable of syncing Microsoft Office Outlook data.
Chapter 1 Use Mobile Computer ADD/REMOVE PROGRAMS Note basically the applications to be installed to the mobile computer need to be installed on your PC first. So download the application programs to your PC first and install them on your PC so they can be installed onto the mobile computer later. Many application programs are installed in different ways. Read their installation guides or documentation to know how they are installed.
CP60 Mobile Computer Reference Manual 4) Select the application program(s) to install to the mobile computer, and deselect the application program(s) to uninstall from the mobile computer. 5) Hit the OK button. ActiveSync proceeds to install programs and/or remove programs to/from the mobile computer. 6) Follow the onscreen instructions on both your PC and the mobile computer to proceed.
Chapter 1 Use Mobile Computer 4) Double-click My Windows Mobile-Based Device . My Windows Mobile-Based Device opens. 5) Double-click Program Files. Program Files folder opens. This is where the downloaded applications are normally installed on the mobile computer’s local storage. In the folder, each sub-folder stores an application. 6) Open the folder of the application to create shortcut for. 7) Find the executable file of that application.
CP60 Mobile Computer Reference Manual You can also add a file shortcut to Start screen right by the mobile computer. See Add Items to Start Screen for more details. REMOVE SHORTCUTS FROM START SCREEN Note the inherent shortcuts aren’t removable. Only the added shortcuts are removable. to To remove an added shortcut from Start screen, simply use ActiveSync’s Explore delete the shortcut from My Windows Mobile-Based Device\Windows\Start Menu\Programs folder.
Chapter 1 Use Mobile Computer Option Description Automatic Auto-detects proxy Work Network Always uses proxy The Internet This option detects if a proxy should be used when passing connections through the PC. If yes, configure the proxy on the mobile computer. This option best suits connecting to a PC (laptop) that may be used at home (with no proxy), as well as to a corporate network (with proxy).
CP60 Mobile Computer Reference Manual 2.9. AUDIO PLAYBACK Use a headset for audio playback and hands-free telephone communication. Bluetooth headsets are supported to deliver better mobility. See Use Bluetooth. 2.9.1. VOLUME CONTROL The mobile computer has two volume control facilities – the physical volume rocker perched on the waist of the mobile computer and the onscreen volume gauges featured by the O.S. The physical rocker controls the system volume (media playback and event/notification sounds).
Chapter 1 Use Mobile Computer [Volume] dialog opens presenting the gauges for system volume and phone ringer volume. Two radio buttons [On] and [Off] are featured on the right. Select [On] or [Off] to enable or mute both volumes. Onscreen volume facility Adjusts system volume [On] and [Off] enables or mutes both system and phone ringer volumes Manufactory reserve 3) Adjust to the setting that meets your needs.
Chapter 3 CAMERA The mobile computer is adorned with a 5.0 mega-pixel camera that can also serve as a camcorder. The O.S. provides a camera/camcorder application, which launches the camera, takes pictures, shoots videos and stores the works on the mobile computer’s storage where they can be viewed, edited and output. The camera/camcorder application provides users with satisfactory customization that is helpful for users’ image capture for better documentation. This chapter will guide you to use the camera.
CP60 Mobile Computer Reference Manual 2.1. LAUNCH CAMERA To launch the camera: 1) On Start screen, tap Pictures and Videos . Pictures and Videos application opens. 2) Tap Camera icon located at the upper left of the window. Camera opens in portrait mode and readies to take pictures. 2.1.1. CAMERA SCREEN Camera opens showing subject area on the screen with related information displayed in the lower right corner.
CP60 Mobile Computer Reference Manual 2.2. TAKE PICTURES By default, pictures are taken in JPEG format and are saved to the mobile computer’s internal storage under My Device\My Documents\My Pictures. To change the default storage path, see Camera Settings. To take a picture: 9) Open camera as described in Launch Camera. Camera opens in portrait mode and readies to take pictures. 10) Adjust picture quality and any other settings according to your preferences. See Camera Settings.
Chapter 3 Camera Available menu items are detailed as below: Item Description Video Switch to video camera. Mode Sets camera mode between normal, burst or timer. Brightness Sets brightness between -3 EV to +3 EV in 1 EV increments. Resolution The mobile computer supports QVGA resolution. Zoom Sets zoom from 1x to 4x in 0.5x increments. Full Screen Switches to full screen mode (all menu buttons will be hidden).
CP60 Mobile Computer General tabbed page 58 Reference Manual Slide Show tabbed page
CP60 Mobile Computer Reference Manual 2.3. LAUNCH VIDEO CAMERA To launch the video camera: 1) Launch camera as described in Launch Camera. 2) Tap Menu command on the Softkey bar A pop-up option menu appears onscreen showing various option settings. 15) Tap Video in the option menu. Video camera is readied to begin shooting. 2.3.1. VIDEO CAMERA SCREEN Video camera launches showing subject area onscreen with the remaining recording time displayed in the lower right corner.
CP60 Mobile Computer Reference Manual 2.4. SHOOT VIDEOS By default, videos are shot in WMV format and are saved to the mobile computer’s internal storage under My Device\My Documents\My Pictures. To change the default storage path, see Camera Settings. To shoot a video: 1) Open video camera as described in Launch Camera. Video camera opens in portrait mode and readies to shoot. 16) Adjust brightness and other settings according to your preferences. See Camera Settings. 17) Frame your object on the screen.
Chapter 3 Camera 2) Tap Menu command on the Softkey bar A pop-up option menu appears onscreen showing various option settings. Note: The Menu command and pop-up option menu are also available in the video preview screen.
CP60 Mobile Computer Reference Manual Item Description Still Switch to camera. Brightness Sets brightness between -3 EV to +3 EV in 1 EV increments. Quality The mobile computer supports QVGA resolution. Full Screen Switches to full screen mode (all menu buttons will be hidden). Options… Opens Pictures & Videos settings page showing four tabbed pages: Video, General, Slide Show and Camera.
Chapter 3 Camera 2.5. PICTURES & VIDEOS Pictures & Videos is an application that views and edits the pictures taken and videos shoot, or those copied or downloaded. It also sets background for Today Screen and Start Screen, and sets avatars for your contacts. It also emails pictures and videos. LAUNCH PICTURES & VIDEOS To launch Pictures & Videos: 1) On Start screen, tap Pictures & Videos icon . OR Tap Thumbnails command on camera or camcorder menu bar if it is active at the moment.
CP60 Mobile Computer Reference Manual The picture displays or the video starts to play onscreen. TAKE OTHER ACTIONS TO A VIDEO OR A PICTURE To edit, manage or take other actions to a video or picture: 1) Open Pictures & Video as described in Launch Pictures & Videos. Pictures & Videos opens. 2) Tap & hold the thumbnail of the picture or video to edit, manage or take other actions to. A context menu comes up. 3) Tap a menu item to perform the desired action.
Chapter 3 Camera 65
Chapter 3 OPERATING SYSTEM The mobile computer is powered by Windows Embedded Handheld 6.5, a member of Windows Embedded family branded for full compatibility with Windows Mobile 6.5. Windows Embedded Handheld 6.5 features a prettier UI and a series of fresh new looks unseen in the predecessor Windows CE. The most important enhancement of all is those touch-friendlier UI elements such as the inertial scrolling of lists and redesigned context menus.
CP60 Mobile Computer Reference Manual 3.1. 1ST STARTUP Finished with the setup as described in Main Battery Setup and Insert SD Card, proceed to power on the mobile computer as described in Power On Mobile Computer. If you haven’t installed a SIM card, the mobile computer isn’t able to connect to mobile networks for phone or data. Upon first power-on, the O.S. boots into Today Screen, a new feature introduced by Windows Embedded Handheld 6.
Chapter 3 Operating System 3.2. TODAY SCREEN It is Today screen that first shows oncscreen when the mobile computer powers on or is unlocked. Today screen shows a scrollable list of applications such as pictures, music, phone, voicemail, clock & time and so on, and the application in the center is always the active one. When an application is active, today sceen displays additional information, and command buttons appear on the Softkey bar to take actions to the application.
Chapter 3 Operating System 3.2.1. CUSTOMIZE TODAY SCREEN Customize Today screen to change its appearance and presented items. To customize Today screen: 1) Tap Windows icon on Softkey bar or hit physical Windows key . 2) Tap Settings | Home. Home settings open. 3) Select between Appearance and Items tabs. Appearance tabbed page changes the background for Today screen while Items tabbed page changes the items to present.
CP60 Mobile Computer Reference Manual 3.3. START SCREEN Start screen is where all features on the mobile computer are accessed from. This screen lays out the application icons, shortcuts and so on in a staggered manner so each icon are more touchy and icons allowed onscreen are increased. Basic operations on Start screen: If you see the icon of the application you want to open, tap it. Flick the screen to scroll down and bring more application icons into view. (See also Use Touchscreen.
Chapter 3 Operating System 3.3.1. RETURN TO START SCREEN Tap Windows icon screen. on Softkey bar or hit physical Windows key to return to Start 3.3.2. TITLE BAR At the top of almost every screen is Title bar. It shows a title on the left and a notification area on the right. The title delivers the name of the current screen or currently active application while notification area shows a sequence of graphic icons delivering system statuses or notifications issued to users.
CP60 Mobile Computer Reference Manual WiFi network(s) available WiFi in use Bluetooth in use Bluetooth headset in use Alarm on More notifications to be viewed. Tap Title bar or tap the “Notification” command on Softkey bar to view them all. Email received Text message received Syncing data with a Windows-based PC Roaming Microsoft’s appeal for customer feedback to help improve Windows Embedded Handheld software. To learn more status icons of mobile/wireless data connections, see Radios.
Chapter 3 Operating System 3.3.3. MANAGE NOTIFICATIONS Status/notification icons are relatively small, however by tapping the Title bar a drop-down bar will appear to provide larger and touchy icons. Tap Title bar to open a drop-down bar. Drop-down bar opens. Checks what the O.S. notifies of. Note there are commands that come up on Softkey bar to manage a notification. A general view of bigger notification/status icons on Drop-down bar: Icon Description Zooms in/out of current screen.
CP60 Mobile Computer Reference Manual Bluetooth A2DP profile in use. Tap it to access Bluetooth devices list. Checks a new e-mail. Opens Text application. Roaming on RESPOND TO NOTIFICATIONS 1) Tap Title bar to open Drop-down bar. Drop-down bar opens. 2) Tap the status/notification icon to manage. Drop-down bar closes and you are taken to the application in question. CLEAR NOTIFICATIONS A notification won’t be cleared until it is managed.
Chapter 3 Operating System 3.3.4. CUSTOMIZE START SCREEN Customize Start screen by changing the background, application shortcuts, and so on. Rearrange the application shortcuts to make the applications that you use most often easiest to access. CHANGE BACKGROUND Craft your Start screen and Today screen with any of your own pictures or a number of designer’s themes bundled with the O.S. APPLY ONE OF YOUR OWN PICTURES: 1) On Start screen, tap Pictures & Videosʳ . Pictures & Videos opens.
CP60 Mobile Computer Reference Manual 3) Tap & hold the executable file. A context menu comes up. 4) Tap Copy. 5) Browse to My Device\Windows\Start Menu\Programs. Programs folder opens. 6) Tap & hold any vacant spot onscreen. Context menu comes up 7) Tap Paste Shortcut. The application shortcut is added to Start screen. ADD BOOKMARKED WEBPAGE SHORTCUTS 1) On Start screen, tap File Explorer . File Explorer opens. 2) Browse to My Device\Windows\Favorites.
Chapter 3 Operating System REMOVE ITEMS FROM START SCREEN The mobile computer relies on File Explorer Start screen: 1) On Start screen, tap File Explorer to remove an application shortcut from . File Explorer opens. 2) Browse to My Device\Windows\StartMenu\Programs. Programs folder opens. This is where all applications/bookmarks/file shortcuts are. 3) Tap & hold the shortcut to remove. Context menu comes up. 4) Tap Delete. The shortcut is removed from Start screen.
CP60 Mobile Computer Reference Manual 3.3.5. START SCREEN ICONS Start screen presents a number of icons in a staggered pattern that makes them easily touchable. Each icon opens an application, folder or a group of settings when it is tapped. This section will give an overview of these icons. Icon Name Description Home (Today) Opens Today screen. See Today Screen. Text Sends SMS text messages. E-mail Pens and sends emails.
Chapter 3 Operating System Camera Takes pictures and shoots videos. See Camera for details. Windows Media Plays audio/video files. Marketplace An online software download/purchase service which was shut down on 22nd May 2012. MSN Weather Checks the weather of your locale and other parts of the world. Windows Live Accesses Windows Live services (such as Hotmail) or searches world wide web. MSN Money Checks stocks. Calculator Performs mathematical calculations.
CP60 Mobile Computer Reference Manual 3.4. SUSPEND & RESET MOBILE COMPUTER To save from repeatedly charging and replacing batteries more often than you would like to, suspend the mobile computer when you are not actively using it. “Suspension” is a state to hold the device from running without turning off power. It is a “soft-off” state whicih enables less power consumption, and also a state from which a device can quickly awake from since there is no need to restart the software (applications). 3.4.1.
Chapter 3 Operating System Note the following cases also suspend the mobile computer: Battery door isn’t in place. Battery fails. To get the most from the battery power, see Optimize Battery Life. 3.4.2. WAKE UP MOBILE COMPUTER “Waking up” is to restore the suspended device to its previous working state. The mobile computer can be awoken both manually and automatically. MANUAL AWAKENING Press (without holding) the physical Power button or central scan key to wake up the mobile computer.
CP60 Mobile Computer Reference Manual [1] Power button [2] Reset toggle Figure 12: Reset WARM BOOT (SOFT RESET) “Warm boot” is also known as “soft reset”. When the mobile computer runs slower than normal or when one or more active applications crash, perform warm boot to close all active applications and restart the mobile computer without turning off power supply to hardware. After warm boot, all flash memory, system settings and clock/calendar time are kept, and all saved data are preserved.
Chapter 3 Operating System 3.5. SET SCREEN LOCK For the sake of security, you may want to restrict the access to the mobile computer by a self-set password. The O.S. supports setting up a password to recover the access to the mobile computer. To set up an unlock password: 1) On Start screen, tap Settings | Lock. Password setting opens. 2) Configure how much time the mobile computer should be left unused before locking out the screen. Set up a unique password to unlock the screen.
CP60 Mobile Computer Reference Manual 3.6. WORK WITH MENUS The O.S. presents two kinds of menus: option menus and context menus. By these menus, users are able to operate onscreen and use applications. 3.6.1. OPTION MENUS Normally a screen or an active application features a “Menu” command on Softkey bar to launch an “option menu”, which causes actions to be taken by the screen or the active application.
Chapter 3 Operating System Note some screens/applications may not have an option menu. A screen that doesn’t feature a “Menu” command on Softkey bar. An example of Start screen. 3.6.2. CONTEXT MENUS The context menu on the other hand contains the actions to be performed on a specific item selected onscreen. Tap & hold an onscreen item to open the context menu. Not all items have context menus. Nothing happens if you tap and hold such an item. A context menu launches for a selected item.
CP60 Mobile Computer Reference Manual 3.7. MANAGE APPLICATIONS On Windows Embedded Handheld 6.5, Start screen is where all inherent applications of the O.S. are accessed from. In the O.S., when you run an application, the other applications that have been running don’t shut down but keep on running whether it is music that is being played or a webpage that is being browsed. Start screen Application shortcuts 3.7.1. TASK MANAGER The O.S.
Chapter 3 Operating System MONITOR OPENED APPLICATIONS Upon launch, Task Manager shows a list of all opened applications which are under monitor: Task Manager screen “Application” shows a list of opened applications which are being monitored Closes the application selected onscreen Delivers the application’s memory usage. Tap to ascend/descend the entries Deliver the application’s CPU usage.
CP60 Mobile Computer Reference Manual Task Manager monitors opened applications Tap & hold an entry to pop up the context menu. Context menu opens. SWITCH TO ANOTHER OPENED APPLICATION To switch to another opened application: 1) Launch Task Manager as described in Launch Task Manager. Task Manager opens monitoring opened applications. 2) Tap & hold the application to switch to. Context menu shows up. 3) Tap Switch to. The desired application opens onscreen.
Chapter 3 Operating System Task Manager shifts to monitor processes. Task Manager monitors cached processes. Note: Stopping an application or process or service may interrupt one or more dependant functions on the mobile computer. You may need to restart the mobile computer to recover full functionality. DOWNLOAD & INSTALL APPLICATIONS A rich resource of applications is downloadable from the Internet to run on the O.S. The executable files for installing on Windows Embedded Handheld 6.
CP60 Mobile Computer Reference Manual This screenshot shows downloading an application program on the mobile computer. When asked to confirm the download, tap the “Yes” command on Softkey bar. Download starts and proceeds. If an SD card is equipped, you’re asked where to install the application; or this screen won’t show and the application is straight installed to internal storage. Installation progresses.
Chapter 3 Operating System Installation completes. Tap “OK” command to finish and quit installation. UNINSTALL APPLICATIONS On the mobile computer, the acquired (non-inherent) applications are subject to your manual uninstallation. To uninstall an application: 1) On Start screen, tap Settings | System | Remove Programs . Remove Programs opens showing the applications downloaded and installed from external sources. Remove Programs Currently available internal storage 2) Tap the application to remove.
CP60 Mobile Computer The lower-right “Remove” button becomes available. 3) Tap the “Remove” button to uninstall the application. 4) Follow onscreen instruction to complete through the uninstallation.
Chapter 4 RADIOS The mobile computer is a versatile networker. It integrates Wi-Fi and Bluetooth for wireless data, and optionally a HSPA+ module for mobile data. It also includes a GPS receiver which can detect your locations on earth with street-level accuracy. With the help of these radios, the mobile computer keeps users online all the time. In this chapter, you will learn how these radios can work for you. 4. 4.1 4.2 4.3 4.4 4.5 4.6 IN THIS CHAPTER Access Cellular WAN ................................
CP60 Mobile Computer Reference Manual Network tabbed page opens showing the network currently connected to at the top. Phone settings Network tabbed page Network you’re currently using 4.1.2. ENABLE/DISALBE MOBILE DATA To turn on/off the mobile computer’s mobile data (HSPA+): 1) On Start screen, tap Settings | Connections | Wireless Manager . Wireless Manager opens. 2) Tap the “Menu” command on Softkey bar. Option menu opens. 3) Tap Disconnect Cellular Data. Mobile data is disabled. 4.1.3.
Chapter 4 Radios GSM/UMTS tabbed page opens. 6) Tap GSM (2G Only) from the drop-downs. 7) Tap Apply to apply the change. 8) Tap the “OK” command on Softkey bar to quit setting. 4.1.4. CELLULAR DATA SETUP To set up mobile data (GPRS/EDGE/UMTS/HSPA): 1) On Start screen, tap Settings | Connections | Connections (Manager) . Connections setting opens showing Tasks tabbed page. 2) Tap Add a new modem connection under My ISP. Make New Connection page opens. 3) Name the connection.
CP60 Mobile Computer Reference Manual If you have two or more different networks set up, tapping and holding an item provides options for you to either delete or connect to the selected network. Tap and hold the selected item. Context menu pops up. Note to turn off Wi-Fi to access mobile data because Wi-Fi supersedes mobile data. 4.1.5.
Chapter 4 Radios My ISP setting Modem tabbed page shows by default. Tap the connection to edit. Tap the “Edit” command on Softkey bar to edit the APN selected onscreen. 4) Tap the APN to edit. The APN to edit is selected onscreen, and the “Edit” command becomes available on Softkey bar. 5) Tap the “Edit” command on Softkey bar. 6) Follow onscreen instruction to finish editing. 4.1.6.
CP60 Mobile Computer Reference Manual Internet Sharing opens. Internet Sharing 3) Select USB for PC Connection, and select your mobile service for Network Connection. 4) Tap the “Connect” command on Softkey bar to start Internet tethering. The mobile computer prompts “Connected” in a few seconds when the PC connects to Internet. Tap the “Discon…” command on the mobile computer to disconnect.
Chapter 4 Radios 4.2. USE WI-FI The mobile computer is capable of Wi-Fi, a wireless networking technology making use of an access point, also known as “hotspot”, to connect to a wireless local area network. To use Wi-Fi, the mobile computer has to connect to a hotspot. Some hotspots are open to connect while others request for a key to authenticate access. Authentication key must be included in the mobile computer’s Wi-Fi settings.
CP60 Mobile Computer Reference Manual Wi-Fi is on or off. Once Wi-Fi is on, the mobile computer starts scanning for the available Wi-Fi networks within its reach. The O.S. shortly displays a “Multiple Networks Detected” dialog prompting a few names of those found. “Multiple Networks Detected” dialog If the “Multiple Networks Detected” dialog doesn’t show, tap Title bar to open Drop-down bar and tap icon to display the dialog. 4.2.3.
Chapter 4 Radios 1) From “Multiple Networks Detected” dialog, tap Show all networks link to bring all detected networks into view. Wi-Fi settings open showing Wireless tabbed page. It displays both open and secured networks with signal strength. Secured networks have a lock graphic on them. Wi-Fi settingsWireless tabbed page A secured network Tap to manually add a Wi-Fi network that doesn’t broadcast its name (SSID) or is out of reach. See Add Wi-Fi Network for details.
CP60 Mobile Computer Reference Manual 2) Tap the network to connect. “Configure Wireless Network” page opens. Configure Wireless Network For Connects to, select between The Internet and Work. Select The Internet if you’re using the network to access the Internet; or select Work if you’re using the network to access an internal network, i.e. the work network (the intranet). Select This is a hidden network if the network doesn’t broadcast its name. If you’re adding a hidden network, see Add Wi-Fi Network.
Chapter 4 Radios If the network to connect to is secured, you’re prompted to enter a password or other credentials. Ask your network administrator for the details. 4) Tap Next to proceed. 5) Follow onscreen instruction to follow through the setup. When setup finishes, the mobile computer tries to connect to the Wi-Fi network set and reopens Wireless tabbed page. Once connected, the network displays “Connected”. To edit it, tap & hold it.
CP60 Mobile Computer Reference Manual 4.2.4. CONNECT ANOTHER WI-FI NETWORK To connect to another Wi-Fi network: 1) Open Wi-Fi’s Wireless tabbed page. (Start screen | Settings | Connections | Wireless Manager | Softkey bar “Menu” command | Wi-Fi Settings.) Wi-Fi’s Wireless tabbed page opens. 2) Tap & hold the Wi-Fi network to connect that is available but unconnected (marked as “Available”). Context menu opens. 3) Tap Connect. 4) Follow onscreen instructions to proceed. 4.2.5.
Chapter 4 Radios Wi-Fi’s Advanced settings open: Wi-Fi’s Advanced settings 4) Deselect Turn on available network notifications. See also Advanced Wi-Fi Settings. 4.2.8.
CP60 Mobile Computer Reference Manual 4.2.9. CONNECT BY STATIC IP When the mobile computer connects to a Wi-Fi network by DHCP protocol, the mobile computer fetches a network address and other info needed from the network. But when you are connecting a Wi-Fi network by a fixed IP address, make the following setting: 1) Turn on Wi-Fi as described in Enable/Disable Wi-Fi. 2) On Wi-Fi setting screen, tap Network Adapters tab. Network Adapters tabbed page opens.
Chapter 4 Radios 4.2.10.ADVANCED WI-FI SETTINGS Access advanced Wi-Fi settings for the following: To turn on/off available network notifications. To set the time to turn off Wi-Fi after Wi-Fi connection keeps failing To set the network to access only hotspots or computer-to-computer (ad-hoc) or both. To access advanced Wi-Fi settings: 1) Turn on Wi-Fi as described in Enable/Disable Wi-Fi. 2) On Wi-Fi’s Wireless tabbed page, tap the “Menu” command on Softkey bar. Option menu opens. 3) Tap Advanced.
Chapter 4 Radios 4.3. USE BLUETOOTH The mobile computer is Bluetooth-enabled to synchronize data with other devices such as PCs, car hands-free, headsets, printers, PDAs, and cell phones. Bluetooth enables wireless connections over a short distance about 8 meters. It is specified in IEEE 802.15.1 as a “wireless personal area network” (WPAN). To connect a Bluetooth device for the 1st time, the mobile computer needs to “pair” with it.
Chapter 4 Radios Device ID tabbed page opens. 3) Enter a name following the prompted rule. 4) Tap the “OK” command on Softkey bar to apply the change and quit setting. 4.3.3. EXPOSE MOBILE COMPUTER In default state the mobile computer is hidden from other Bluetooth devices. To allow other devices to be able to find mobile computer, make the following setting: 1) On Start screen, tap Settings | Bluetooth . Bluetooth settings open showing Devices tabbed page. 2) Tap Mode tab. Mode tabbed page opens.
CP60 Mobile Computer Reference Manual Bluetooth entry shows a “Visible” label on Wireless Manager screen The mobile computer becomes discoverable by other Bluetooth devices. On Wireless Manager screen, the Bluetooth entry show a “Visible” label.
Chapter 4 Radios 4.3.4. TURN ON/OFF BLUETOOTH To turn on/off Bluetooth: 1) On Start screen, tap Settings | Connections | Wireless Manager . Wireless Manager opens. 2) Tap the Bluetooth entry. Bluetooth powers on. OR 1) On Start screen, tap Settings | Bluetooth . Bluetooth’s Devices tabbed page opens. 2) Tap Mode tab. Mode tabbed page opens. 3) Select Turn on Bluetooth. 4) Tap the “OK” command on Softkey bar. Bluetooth powers on. 4.3.5.
CP60 Mobile Computer Reference Manual 3) Tap Add new device… The mobile computer scans and displays the names of all Bluetooth devices found within reach. Bluetooth scanning result screen Tap to scan again. If the device to pair with doesn’t display, make it discoverable. If the mobile computer stops scanning before the device to connect becomes discoverable, tap Refresh. 4) Tap the name of the found device that you wish to connect. Tap Next. The two devices pair with each other.
Chapter 4 Radios OR Tap the “Advan…” command on Softkey bar, which only briefly shows, to configure the Bluetooth features to use with that device. Then tap Save. Devices tabbed page re-opens listing the just connected Bluetooth device among others. A device connected is listed under Connected label. A paired but unconnected device is listed under Disconnected label. Devices tabbed page A Bluetooth device connected. A Bluetooth device paired but disconnected.
CP60 Mobile Computer Reference Manual The mobile computer is disconnected from the Bluetooth device. 4.3.7. UNPAIR BLUETOOTH DEVICES To unpair a Bluetooth device: 1) Open Bluetooth settings. (Start screen | Settings | Bluetooth.) Bluetooth settings open showing Devices tabbed page. 2) Tap & hold the device to unpair from. Context menu opens. 3) Tap Delete. The Bluetooth device is unpaired. The mobile computer needs to pair with it again to reconnect it. 4.3.8.
Chapter 4 Radios Partnership Settings opens listing the device’s available profiles. Partnership Settings 4) Select or deselect a profile to use it or not. 4.3.10. BLUETOOTH FILE EXCHANGE Once connected with other devices using Bluetooth, the mobile computer can offload or download files to/from them. Basically it relies on File Explorer to get it done. OFFLOAD FILES 1) On the mobile computer, turn on Bluetooth as described in Turn on/off Bluetooth if you haven’t. 2) Open File Explorer .
CP60 Mobile Computer Reference Manual The Bluetooth application generates a list of Bluetooth devices found. 6) Select the device to offload the file to. The device will receive a notification asking for confirmation to accept the file. 7) Confirm accept. The device proceeds to receive it inbound. DOWNLOAD FILES For the mobile computer to download files from other devices using Bluetooth, “Beam mode” must be enabled first: To enable Beam mode: 1) On Start screen, tap Settings | Connections | Beam .
Chapter 4 Radios 4.3.11. BLUETOOTH ACTIVESYNC The advantage of Bluetooth ActiveSync is to save the trouble perpetually switching between multiple devices by changing cables or adapters. Note to disable network bridging on your PC (specifically bridging to a Remote NDIS adapter) before connecting Bluetooth ActiveSync. For more information on network bridging, see Windows Help on the PC. To use ActiveSync using Bluetooth: 1) Note the virtual Bluetooth COM port on your PC.
CP60 Mobile Computer Reference Manual DISCONNECT BLUETOOTH ACTIVESYNC To disconnect Bluetooth ActiveSync: 1) On the mobile computer, tap ActiveSync from Start screen. ActiveSync opens. 2) Tap the “Menu” command on Softkey bar. Option menu opens. 3) Tap Disconnect. Bluetooth ActiveSync is disconnected. 4.3.12.
Chapter 4 Radios In a few seconds Internet Sharing prompts “Connected” on the mobile computer. Your PC connects to Internet. Internet Sharing “Connected” prompted. Tap to stop Bluetooth Internet Sharing Tap the “Discon…” command on Softkey bar to stop. For the internet sharing using USB, see USB Internet Sharing. Compare Bluetooth Pass-through Networking & USB Pass-through Networking. 4.3.13.
CP60 Mobile Computer Reference Manual 4.4. CONNECT TO VIRTUAL PRIVATE NETWORKS Virtual Private Networks (VPN) are a group of individual networks on a public network (such as the Internet) that connect to each other by private lines and communicate among themselves by encryption technology so their data are kept safe from unauthorized access. VPN is the infrastructure commonly adopted by corporations so their users can access corporate network resources when they are not in offices or tripping out of town.
Chapter 4 Radios 2) Under My Work Network label, tap Add a new VPN server connection. “Make New Connection” page opens. “Make New Connection” page 3) Complete each VPN settings. Consult your network administrator for the protocol employed on the VPN and other requested credentials. 4) Follow onscreen instructions to proceed. Once a VPN connection is set up, a link Edit my VPN servers shows up under My Work Network label. Proceed to connect your VPN as described in Connect VPN.
CP60 Mobile Computer Reference Manual 4.4.2. CONNECT VPN After a VPN connection is set up as described in VPN Connection Setup, a link Edit my VPN servers shows up under My Work Network. Move on to connect to the prospective VPN. A link Edit my VPN servers shows up. To connect VPN: 1) Tap Edit my VPN servers link. My Work Network opens showing VPN tabbed page. My Work Network’s VPN tabbed page Tap & hold to pop up context menu. my 2) Tap & hold the VPN to connect. Context menu shows up.
Chapter 4 Radios A dialog briefly displays noticing the attempt to connect. In a few seconds, the VPN is connected. Once connected, the mobile computer makes a sound as per settings in Sounds & Notifications. 4.4.3. DISCONNECT VPN The O.S. doesn’t feature any facility or mechanism to disconnect VPN, consider using a third-party application to disconnect VPN. 4.4.4. EDIT A VPN To edit a VPN: 1) On Start screen, tap Settings | Connections | Connections (Manager) .
CP60 Mobile Computer My Work Network’s VPN tabbed page opens. 3) Tap & hold the VPN to edit. Context menu shows up. 4) Tap Delete. The VPN is deleted.
Chapter 4 Radios 4.5. INSTALL SECURE CERTIFICATES To connect to a VPN or Wi-Fi network that deploys secure certificates, the mobile computer must have these certificates. Where the mobile computer stores these secure certificates is called “certificate store”. Windows Embedded Handheld 6.5 has three “certificate stores” – the Personal, Intermediate and Root certificate stores. A certificate store usually has numerous certificates, possibly issued from a number of different certification authorities.
CP60 Mobile Computer Reference Manual Certificate installer installs the file. 4) Follow the onscreen instructions to proceed. Once the installation completes, it can be viewed in Certificates 126 .
Chapter 4 Radios 4.6. LOCATION DISCOVERY Adorned with a GPS module, the mobile computer is capable of finding your location on earth. GPS relies on the satellites covering the sky around the world to pinpoint your whereabouts. A location-aware application is necessary, such as CipherLab’s GPS Viewer for NMEA-based location discovery. There are other applications downloadable from Internet. Download “.cab”-suffixed programs that confirm the compatibility with Windows Embedded Handheld 6.5.
CP60 Mobile Computer Reference Manual 4.6.2. USE GPS To discover locations by GPS: 1) Launch GPS as described in Launch GPS. 2) Launch a GPS software or location-aware application.
Chapter 5 PHONE This chapter depicts SIM card installation and status icons associated with phone connection. For the phone’s data calls, see Access Cellular WAN.
CP60 Mobile Computer Reference Manual 5.1. SIM CARD To use the mobile computer’s phone, first obtain a SIM card from your mobile carrier. Activate the SIM card and assemble it to the mobile computer. The phone is enabled by default and connects to your wireless network when the mobile computer powers on. The mobile computer may ask you for a PIN to unlock the SIM card when it powers on. Contact your mobile carrier for their default PIN. 5.1.1.
Chapter 5 Phone 131
CP60 Mobile Computer 132 Reference Manual
SPECIFICATIONS PLATFORM, PROCESSOR & MEMORY Operating System & CPU O.S. Version Microsoft Windows Embedded Handheld 6.5 CPU TI DM3730 1GHz Processor Memory RAM 512MB DDR SDRAM Flash 4GB Flash ROM Expansion Slot One MicroSDHC card slot, supports up to 32GB COMMUNICATIONS & DATA CAPTURE Communications USB Host/Client USB 1.1 / USB 2.0 WPAN Built-in module for Bluetooth version 2.1 + EDR Class II connectivity WLAN Built-in module for 802.
CP60 Mobile Computer Reference Manual ELECTRICAL CHARACTERISTICS Batteries Main Battery Pack Standard: 3.7V, 3600 mAh High Capacity: 3.7V, 4400 mAh Rechargeable Li-ion battery Charging time: approximately 4 hours Backup Battery 3.3V, 15 mAh Rechargeable Li-ion battery Data retention for 30 minutes Charging time: 5 hours Power Adapter Power Supply Cord for Input AC 100~240V, 50/60 Hz Snap-on Cable Output DC 5 V, 4A Power Supply Cord for Input AC 100~240V, 50/60 Hz Charging & Comm.
Specifications PHYSICAL CHARACTERISTICS Color Tap Screen Display Display 3.
CP60 Mobile Computer Reference Manual ENVIRONMENTAL CHARACTERISTICS Temperature OperatingNote -20 °C to 50 °C / -4°F to 122°F Storage -30 °C to 70 °C / 32°F to 95°F (without battery) Charging 0 °C to 35 °C / -22°F to 158°F (without battery) Humidity Operating 5% to 95%, non-condensing Storage 20% to 95%, non-condensing Resistance Impact Resistance Multiple 1.8m drops onto concrete Tumble Test 1,000 tumbles at 1 m (2,000 drops) per applicable IEC tumble spec.
Specifications ACCESSORIES Accessory Options Detachable Pistol Grip Belt Holster (with or without shoulder strap) Charging & Communication Cradle Snap-on Charging and Communication Cable (USB & RS-232) According to FCC 15.407(e), the device is intended to operate in the frequency band of 5.15GHz to 5.25GHz under all conditions of conditions of normal operation.
