User's Manual

40
CP60 Mobile Computer Reference Manual
2.7.3. INSERT SD CARD
Day-to-day use of the mobile computer might cause the available internal storage to run
short. Equip the mobile computer with an external memory unit to expand storage capacity.
Follow the steps below to install a SD card:
1) Power off the mobile computer.
2) Place the mobile computer face-down on a flat and soft surface.
3) Remove the battery door and main battery pack as described in Main Battery Setup
.
Battery chamber is opened.
4) Locate the SD card socket inside battery chamber. (See Inside Battery Chamber
.) The
SD card socket is equipped with a hinged cover.
5) Push the hinged cover to the open
position.
6) The hinged cover unlocks.
7) Swivel up the cover.
8) Insert SD card into the cover slot in
the direction indicated . The
metal contact pins should face down
9) Put down the hinged cover and lock
it into place.
10) Restore main battery pack and the
battery door.
Figure 9: Inserting SD Card