User's Manual

81
Chapter 3 Operating System
Note the following cases also suspend the mobile computer:
 Battery door isn’t in place.
 Battery fails.
To get the most from the battery power, see Optimize Battery Life
.
3.4.2. WAKE UP MOBILE COMPUTER
“Waking up” is to restore the suspended device to its previous working state. The mobile
computer can be awoken both manually and automatically.
MANUAL AWAKENING
Press (without holding) the physical Power button or central scan key to wake up the mobile
computer.
AUTO-AWAKING
The mobile computer wakes up by itself when either of the following happens:
 Plugging of USB or serial cable.
 Plugging of AC power cord.
 WWAN ringing signal occurs.
 RTC alarm occurs.
Note: There are certain cases when the mobile computer cannot be awoken:
(1) When battery door isn’t installed in place.
(2) Imperfect contact between main battery and battery chamber contact pins.
3.4.3. RESET MOBILE COMPUTER
The mobile computer features 2 reset mechanisms, warm boot and cold boot. Performing
these two resetting acts helps resolve certain problems within the O.S. and applications.
Make use of the physical Power button and the reset toggle located on the mobile
computer’s keypad to produce the said actions.