User's Manual

63
Chapter 3
3.2.4 BTPAN
Tap and hold "BTPAN1". The pop-up menu provides a number of options.
ENABLE/DISABLE
CONNECTION
ICONS
DESCRIPTION
This is the control of Bluetooth module for wireless personal area
networking (WPAN) connection, which is not available until the
Bluetooth Manager is executed. When enabled, the status icon
will become .
Tap and hold "BTPAN1" to select [Disable] from the pop-up menu.
The status icon will disappear.
Note: By default, DHCP is enabled. Instead of using DHCP, select [Properties] and
specify a static IP address to the mobile computer. Only change these settings
according to your network administrator's instructions.