User's Manual

84
Terminal Reference Manual
Display
Code Length
Select the check box to display the code length after
decoding a barcode.
Disabled
Display RFID
UID
Select the check box to display UID after decoding an
RFID tag.
Enabled
Display RFID
User Data
Select the check box to display user data after
decoding an RFID tag.
Disabled
Use Delimiter
to separate
UID from
data
Decide whether or not to use a delimiter to separate
UID from user data when decoding an RFID tag.
Disabled
4.3.4 BEEPER / VIBRATOR
Tap the [Beeper / Vibrator] button on the General tab to configure associated
settings.
BEEPER / VIBRATOR DEFAULT
Good Read
Beep
Mute, or Sound 1~9 Sound 1
Warning
Beep
Mute, or Sound 1~9 Sound 2
Vibration
Duration
0~30 (sec.)
 0 = Disable the vibrator
0 (= Disable)
4.3.5 SYMBOLOGY SETTINGS
For barcode settings, tap the Symbologies tab.
 Refer to Appendix I – Scan Engine Settings for the symbologies or RFID tags
supported by a scan engine.
 Refer to the Symbology Settings Table in Appendix II – CCD/Laser Scan Engine.
 Refer to the Symbology Settings Table in Appendix III – 2D Scan Engine.
4.4 INBOX
You can send and receive e-mail by connecting to a POP3 or IMAP4 server. Inbox
provides an e-mail service for each method you use.
In addition, you can synchronize the e-mail messages in Inbox with either Microsoft
Outlook or Microsoft Exchange Server on your computer through the default
ActiveSync mail service.