User's Manual

123
The tables below list reader settings as well as symbology settings for the 2D scan
engine.
READER SETTINGS TABLE
2D DESCRIPTION DEFAULT
Focus Mode Select the focus mode to control the working
range:
 Far Focus – optimized to read at its far position
 Near Focus – optimized to read at its near
position
 Smart Focus – toggles the focus position after
every frame
Far Focus
Decode
Illumination
Decide whether to flash illumination on every
barcode capture to aid decoding.
 Turn On (Internal LED )
 Turn Off
On
AIM Pattern Decide whether to project the aim pattern during
barcode capture.
 Turn On
 Turn Off
On
Read Redundancy Level 2
Level 1 The following barcodes must be successfully read twice before
being decoded:
BARCODE TYPES CODE LENGTH
MSI 4 characters of
less
Codabar 8 characters of
less
Discrete 25 (=Industrial
25)
8 characters of
less
Interleaved 25 8 characters of
less
Appendix III
2D SCAN ENGINE