User's Manual

125
Appendix III 錯誤! 尚未定義樣式。
2D DESCRIPTION DEFAULT
Codabar Enable
CLSI Editing When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth,
and tenth characters of a 14-character Codabar
barcode.
 The 14-character barcode length does not
include start/stop characters.
No
NOTIS Editing Decide whether to include the start/stop
characters in the data being transmitted.
 NOTIS Editing is to strip the start/stop
characters, i.e. to disable "Transmit Start/Stop
Characters".
No
Select Length
 One or two fixed lengths
 Range (1~55)
4~55
Code 128 ---
Code 128 Read standard Code 128 barcodes (=without
leading FNC1 character).
Enable
UCC/EAN-128 Read UCC/EAN-128 barcodes with leading FNC1
character.
Enable
ISBT 128 Read ISBT 128 barcodes. Enable
Industrial 25 (= Discrete 25) Enable
Select Length
 One or two fixed lengths
 Range (1~55)
4~55
Interleaved 25 Enable
Convert to EAN-13 Convert a 14-character barcode into EAN-13 if
the following requirements are met:
 The barcode must have a leading 0 and a
valid EAN-13 check digit.
No
Verify Checksum Decide whether to verify the checksum. If desired,
select one of the algorithms below. If the
checksum is incorrect, the barcode will not be
accepted.
 No
 USS algorithm
 OPCC algorithm
No