User's Manual

4.2.2. MANUALLY ADD WI-FI NETWORK

If the network you would like to connect to does not broadcast its SSID, or if the network

is out of range, you may add it manually.

1) Tap All Apps | Settings | Wi-Fi .

2) Tap the Wi-Fi switch to enable this function, and then tap More and select “Add

network”.

3) In the dialog box, enter the name of the network in the Network name field, and

select a security method in the Security field (None, WEP, WPA/WPA2 PSK, 802.1x

EAP).

 For WEP/WPA/WPA2 PSK connections: Enter the required password and tap

Save.

 For 802.1x EAP connections: Tap Advanced options and select the EAP

method in the drop-down box (PEAP, TLS, TTLS, PWD, SIM, AKA), and the Phase 2

authentication in the drop-down box (None, MSCHAPV2, GTC). Select a CA

certificate and User certificate if required (certificates may be installed under

All Apps | Settings | Security | Install from SD card

Certificates.) Enter your username in the Identity box and the password in the

Password box if required.

The handy terminal supports the following certificate file extensions:

4) If necessary, select the Proxy server and IPv4 settings. By default, no proxy is set

and IP settings are set to DHCP.

File Extension Type Standard certificate Key store

Description

DER-encoded X.509

certificates saved in

.crt or .cer files.

X.509 certificates saved in

PKCS#12 key store files with

a .p12 or .pfx extension.

How to install

change the extension to

.crt or .cer.

Change the extension to

.p12 or .pfx.