User's Manual

1.1.1. INSTALLING BATTERY
For shipping and storage purposes, the handy terminal and the main battery are saved in
separate packages.
Note:
Any improper handling may reduce the battery life.
To install the main battery:
1) Press down the lock button and slide it right to the “Unlock” position.
2) Insert your fingernail into the groove between the case and the top of the cover, with
a little force, lift the battery cover up and away from the device.
3) Insert the main battery with the contact pins facing the lower end. Fix the top edge
of the battery first.
4) Press down the lower edge of the battery.
5) Fix the lower edge of the battery cover, and then push the upper end in. Please make
sure that the battery lock is in “Unlock” state before replacing the battery cover.
6) Slide the battery lock to the left to the “Lock” position.
Warning
1) Make sure the battery lock is at the “Lock” position before powering on the device.
2) For initial use, insert a charged battery, lock the battery cover in place, then press the
Power key to power on the handy terminal.