User's Manual

2.4. NOTIFICATIONS
2.4.1. STATUS LED
An LED indicators located above the touch screen provide information about charging
status, scanner light beam, and scanner "Good Read" during data collection.
Indicator
Status Description
Charging
Green, solid Charging complete
Red, solid Charging the handy terminal
Red, blinking
Charging error (for instance, battery not in
place)
Barcode or RFID tag
decode
Green, flash once Good read
The device is on
backup battery power
(the battery cover is
removed)
Red, solid
Upon the removal of the battery cover, the
red light is on for a while and then goes off to
signal that the main battery is ready to be
removed. Please refer to Battery Hot Swap to
perform a successful battery hot-swapping.
Note: For Scanner decode and Scanner beam LED to function, LED notification must be
enabled in Reader Configuration.
2.4.2. AUDIO
The speaker is used to play sounds for events in windows and programs, or play audio files.
In addition, it can be programmed for status feedback. In noisy environments, you may
consider connecting a headset instead. A headset jack is provided on the top of the handy
terminal, which is a 3.5 mm DIA stereo earphone jack. The handy terminal also supports
using Bluetooth headsets.
Supported audio file formats include: WAV, MP3, AAC, AAC+, Enhanced AAC+, AU
(including ADPCM), Midi, XMF, AMR (NB and WB).
Use the volume buttons on the side of the handy terminal to adjust the system volume.