User's Manual

ManualsBrandsCircuit Design ManualsElectronicsWireless remote control transmitter

OG_KST24_v

The

link

restarts

KST2.4W cannot control the receiver unit.

restarts and

The B

sound will

following procedure (AAA batteries × 2).

OG_KST24_v

The

link

restarts

KST2.4W cannot control the receiver unit.

restarts and

The B

sound will

following procedure (AAA batteries × 2).

Replace the battery cover and tighten the screw securely.

OG_KST24_v

Link LED

The

ink LED

link

is disconnected while the button is ON, the

restarts

KST2.4W cannot control the receiver unit.

restarts and

Battery replacement

The B

attery LED will

sound will

following procedure (AAA batteries × 2).

Remove the battery cover.

Replac

Replace the battery cover and tighten the screw securely.

OG_KST24_v

Link LED

ink LED

is disconnected while the button is ON, the

restarts

while the button is

KST2.4W cannot control the receiver unit.

restarts and

Battery replacement

attery LED will

sound will

following procedure (AAA batteries × 2).

Remove the battery cover.

Replac

Replace the battery cover and tighten the screw securely.

OG_KST24_v

Link LED

ink LED

is disconnected while the button is ON, the

while the button is

KST2.4W cannot control the receiver unit.

restarts and

the

Battery replacement

attery LED will

sound will

become low

following procedure (AAA batteries × 2).

Remove the battery cover.

Replac

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

OG_KST24_v

10e

Link LED

ink LED

is on

is disconnected while the button is ON, the

while the button is

KST2.4W cannot control the receiver unit.

the

Battery replacement

attery LED will

become low

following procedure (AAA batteries × 2).

Remove the battery cover.

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

10e

Link LED

is on

is disconnected while the button is ON, the

while the button is

KST2.4W cannot control the receiver unit.

the

ink LED

Battery replacement

attery LED will

become low

following procedure (AAA batteries × 2).

Remove the battery cover.

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

Link LED

is on

when

is disconnected while the button is ON, the

while the button is

KST2.4W cannot control the receiver unit.

ink LED

Battery replacement

attery LED will

flash when

become low

following procedure (AAA batteries × 2).

Remove the battery cover.

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

when

is disconnected while the button is ON, the

while the button is

KST2.4W cannot control the receiver unit.

ink LED

Battery replacement

flash when

become low

. When the

following procedure (AAA batteries × 2).

Remove the battery cover.

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

when

the KST2.4W is

is disconnected while the button is ON, the

while the button is

KST2.4W cannot control the receiver unit.

ink LED

will turn back on.

Battery replacement

flash when

. When the

following procedure (AAA batteries × 2).

Remove the battery cover.

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

the KST2.4W is

is disconnected while the button is ON, the

while the button is

still

KST2.4W cannot control the receiver unit.

will turn back on.

Battery replacement

flash when

. When the

following procedure (AAA batteries × 2).

Remove the battery cover.

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

the KST2.4W is

is disconnected while the button is ON, the

still

N, the link LED goes into a high

KST2.4W cannot control the receiver unit.

will turn back on.

Battery replacement

flash when

the

. When the

following procedure (AAA batteries × 2).

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

the KST2.4W is

is disconnected while the button is ON, the

N, the link LED goes into a high

KST2.4W cannot control the receiver unit.

will turn back on.

Battery replacement

the

battery

. When the

attery LED flashes, replace the batteries according to the

following procedure (AAA batteries × 2).

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

the KST2.4W is

is disconnected while the button is ON, the

N, the link LED goes into a high

KST2.4W cannot control the receiver unit.

will turn back on.

Battery replacement

battery

attery LED flashes, replace the batteries according to the

following procedure (AAA batteries × 2).

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

the KST2.4W is

communicating with the

is disconnected while the button is ON, the

N, the link LED goes into a high

KST2.4W cannot control the receiver unit.

will turn back on.

Battery replacement

battery

attery LED flashes, replace the batteries according to the

e the battery paying attention to

Replace the battery cover and tighten the screw securely.

communicating with the

is disconnected while the button is ON, the

N, the link LED goes into a high

KST2.4W cannot control the receiver unit.

I this case, by releasing the button, normal operation

will turn back on.

battery

voltage

attery LED flashes, replace the batteries according to the

e the battery paying attention to

the

Replace the battery cover and tighten the screw securely.

communicating with the

is disconnected while the button is ON, the

N, the link LED goes into a high

I this case, by releasing the button, normal operation

voltage

attery LED flashes, replace the batteries according to the

the

polarity.

Replace the battery cover and tighten the screw securely.

communicating with the

is disconnected while the button is ON, the

N, the link LED goes into a high

I this case, by releasing the button, normal operation

voltage

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

polarity.

Replace the battery cover and tighten the screw securely.

communicating with the

ink LED blinks

N, the link LED goes into a high

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

polarity.

Replace the battery cover and tighten the screw securely.

communicating with the

ink LED blinks

N, the link LED goes into a high

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

Replace the battery cover and tighten the screw securely.

communicating with the

ink LED blinks

N, the link LED goes into a high

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

Replace the battery cover and tighten the screw securely.

communicating with the

ink LED blinks

N, the link LED goes into a high

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

communicating with the

receiver unit.

ink LED blinks

N, the link LED goes into a high

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

receiver unit.

ink LED blinks

and then i

speed blinking state

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

receiver unit.

and then i

speed blinking state

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

receiver unit.

and then i

speed blinking state

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

receiver unit.

and then i

speed blinking state

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

Circuit Design, Inc.

receiver unit.

and then i

the communication

speed blinking state

I this case, by releasing the button, normal operation

is low. If it declines further, the

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

Circuit Design, Inc.

the communication

speed blinking state

I this case, by releasing the button, normal operation

operation

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

Circuit Design, Inc.

the communication

speed blinking state

I this case, by releasing the button, normal operation

operation

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

Circuit Design, Inc.

the communication

in which the

I this case, by releasing the button, normal operation

operation

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

Circuit Design, Inc.

the communication

in which the

I this case, by releasing the button, normal operation

operation

buzzer

attery LED flashes, replace the batteries according to the

OPERATION GUIDE

Circuit Design, Inc.

the communication

in which the

I this case, by releasing the button, normal operation

buzzer

OPERATION GUIDE

Circuit Design, Inc.

the communication

in which the

I this case, by releasing the button, normal operation

buzzer

OPERATION GUIDE

Circuit Design, Inc.

the communication

in which the

I this case, by releasing the button, normal operation