User's Manual

Placement of the Monitor

This monitor can be placed on a tabletop.

Ŕ You can place the monitor on a tabletop by using the retractable table

stand on the back of the monitor. When not in use, simply tuck the

table stand away into the back of the monitor until you hear a "click".

Placement of the Camera

This camera can be placed on a tabletop or hung on the wall above the

area being monitored.

Ŕ Place the camera within 15 feet of the area being monitored for best picture

results.

Ŕ Do not place objects within 2 feet of the ﬁeld of vision of the camera as the

night vision will not activate correctly if objects are too close.

Mounting the Camera on a Tabletop Safely:

1. Place the camera on a tabletop no less than 3 feet away from your baby’s crib.

2. Feed the power cord down the back of the table or use wall clips (not included)

to secure the cord away so the baby cannot reach it.

3. Plug in the power cord, check the monitor to ensure that you are getting a

good view of your child and there are no obstructions.

Note: Baby monitors and cameras with power cords should never be hung on or

near the crib as it is a strangulation hazard. Power cords should be kept no less

than 3 feet away from the crib and the baby’s reach at all times.

OPERATION

3 ft

mylevana.com

30000_31000_32000_LILA E_F_S.indd 13 07/01/2013 4:37:47 PM