User's Manual

ISSUE POSSIBLE SOLUTION
Equipment does not function Ŕ Confirm that the camera and monitor are ON
Ŕ The battery may be depleted; charge battery
Ŕ The power adapters may not be properly
connected
No reception Ŕ Camera and monitor may not be properly paired;
follow PAIRING instructions
Ŕ Camera may be too far away from the monitor
Ŕ Extend the antenna on the monitor
Reception Interference
(static)
Ŕ The camera and monitor may be too far apart
Ŕ The battery power may be too low
Ŕ Other electronic devices may be interfering with
the signal
Ŕ The camera or monitor may be placed too close
to many metal objects
Feedback (screeching, static) Ŕ The camera and monitor may be too close
together
Ŕ The volume on the monitor may be set too high
Noise (static, beeping) Ŕ Battery power may be too low
Picture works but there is no
sound
Ŕ Volume setting may be too low
Picture is black and white Ŕ Night vision LEDs may be ON; increase the
amount of light in the room being monitored
The rechargeable battery will
not charge
Ŕ The power adapters may not be connected
Ŕ Battery pack may not be properly connected
inside the battery compartment
Maintenance
Ŕ Clean the surfaces of the camera and monitor with a soft, lint-free cloth
Ŕ If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to
not allow water into any openings
Ŕ Never use cleaning agents or solvents
TROUBLESHOOTING
19
mylevana.com
30000_31000_32000_LILA E_F_S.indd 19 07/01/2013 4:37:53 PM