User's Manual

8
SETUP
Battery Installation - Monitor
1. Slide the Removable Belt Clip down to
allow access to the Battery Cover.
2. Slide Battery Cover down to remove.
3. Insert the included rechargeable battery
4. Plug the battery cord into the small
jack on the inside of the battery
compartment.
5. Slide the Battery Cover back into place.
6. Slide the Removable Belt Clip back
into place.
Connecting the Power Adapters
1. Connect the Power Adapter to the
Power Input on the side of the Parent
Unit. Power LED will flash red.
2. Connect the Power Adapter to the
Power Input on the back of the Child
Unit. Power LED will be a solid red.
• For extended periods of non-use, please
remove the battery from the Parent Unit.
Note: Baby monitors with power cords should never be hung on or near the crib
as it is a strangulation hazard. Power cords should be kept no less than 3 feet
away from the crib and the baby’s reach at all times.