User's Manual

9
SETUP
Turn the Monitor On/O
1. Press and hold the On/O
Button.
• Flashing Red = Parent Unit Charging
•
Solid Red = Battery Fully Charged
•
Flashing Green = Searching for Signal
•
Solid Green = Strong Signal
•
Flashing Green = Sound detected
•
Light o = No sound detected
3 ft
away
Mounting the Child Unit on a Tabletop Safely
1. Place the Child Unit on a tabletop no less than 3 feet away from your baby’s crib.
2. Feed the power cord down the back of the table or use wall clips (not included) to
secure the cord away so the baby cannot reach it.
3. Plug in the power cord, check the monitor to ensure that you can hear your child.
Note: Baby monitors with power cords should never be hung on or near the crib
as it is a strangulation hazard. Power cords should be kept no less than 3 feet
away from the crib and the baby’s reach at all times.