User's Manual

10
Placement of the Monitor
The monitor can be used two dierent
ways; attached to your belt or mounted on
the wall.
• Carry the monitor on your belt by sliding
the clip over your belt.
• Hang the monitor from a screw on the
wall using the screw mounting hole in
the belt clip.
SETUP
MAINTENANCE
Mounting the Camera on a Tabletop Safely
• Clean the surfaces of the Parent and Child units with a soft, flu-free cloth.
• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not
allow water into any openings.
• Never use cleaning agents or solvents.
Power-saving PEEP mode
Voice activated technology helps conserve battery life by putting the system into
hibernation mode when sounds are not detected for 30 seconds. If your child starts to
cry or make noise, the unit will automatically detect it and the Noise Indicator on the
Parent Unit will flash. The preset noise level is preset to a level comparable to a
casual conversation.
• Flashing Green = Sound detected
•
Light o = No sound detected