User's Manual

PAIRING CAMERAS

• This monitor has already been paired with the camera. You will

need a pin or small object to press the pair button to connect

additional cameras

To Pair Cameras

1. Turn the monitor OFF using the ON/LCD OFF/OFF switch.

2. Press and hold the “+” brightness button on the right side of the front panel, and

switch the ON/LCD OFF/OFF switch to the ON position.

3. The monitor will turn ON and the pairing screen will be shown.

4. Once you see the screen above, switch on the camera you would like to pair.

Using a pin or small object, press the pair button through the small opening on the

bottom of the camera.

5. The power LED on the camera will begin blinking when you have successfully pressed

the pair button.

6. The monitor and camera will now connect automatically, and the screen will show

“Cam1 OK!”

7. Once you pair Cam 1, the monitor will prompt you to pair Cam 2, Cam 3, and Cam 4.

8. Repeat steps 4 through 6 to connect up to three additional cameras.

9. Once you have connected the number of cameras you would like, turn the monitor

OFF and ON again to resume normal operation.

Pair Button

TW301 Manual.indd 13 22/09/2010 8:35:48 AM