USeRS MANUAL Safe’N See Digital Video Monitor W/ Talk-To-Baby Intercom www.myLevana.com TW501 Manual.
PRODUCT WARRANTY INFORMATION Please visit our web site at www.myLEVANA.com for information about your product’s warranty We take quality very seriously. This is why all of our products come with a one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods: Phone: 1.866.946.7828 Fax: 1.888.771.1701 Web: www.myLEVANA.
INTRODUCTION Congratulations on your purchase of the Levana TW501 Digital Video Baby Monitor! This monitor uses advanced Clearvu® digital technology that will deliver a crystal clear view of your baby’s room no matter where you are in the house. Feel free to relax and take comfort in knowing that your child is in good hands with Levana. TABLE OF CONTENTS PRODUCT WARRANTY INFORMATION................................................................... INTRODUCTION .............................................
FEATURES ClearVu® Digital Wireless Technology ClearVu® technology ensures outstanding image and sound clarity so that you can watch and listen to your child up to 450ft away. With Levana, you’ll never miss a moment. Temperature Monitoring to Ensure Safety Many studies indicate that your baby’s room should be between 61°-68° F (16°-20° C). This system is equipped so you can monitor the temperature in your baby’s room and know that they are always safe and comfortable.
FEATURES LED Noise Level Indication Lights The monitor has LED lights on it that light up to display up to five different levels of sound. This means you can turn the volume all the way down, relax and still know when and how much noise your baby is making. All-in-One Table Stand and Belt Clip The table-stand also functions as a belt clip for ultra usability.
BUTTONS AND CONNECTIONS - MONITOR 6 TW501 Manual.
BUTTONS AND CONNECTIONS - MONITOR 1. Antenna Transmits and receives signals 2. Volume Level LEDs Indicates the amount of sound being heard by the camera 3. Increase Volume and Brightness Increases the volume through the speaker, and adjusts settings in the menu 4. Decrease Volume and Brightness Decreases the volume through the speaker, and adjusts settings in the menu 5. ON/OFF Switch Turns the unit ON and OFF 6.
BUTTONS AND CONNECTIONS - CAMERA 8 TW501 Manual.
BUTTONS AND CONNECTIONS - CAMERA 1. Antenna Transmits and receives signals 2. Night Vision IR LEDs Allows you to see up to 10 feet in complete darkness 3. Camera Lens Point at what you would like to view on the monitor 4. Microphone Captures all sounds in the baby’s room 5. Night Light Soothe baby to sleep with the built in night light 6. CDS Light Sensor Detects the absence of light and turns on night vision 7. Power LED Indicates that the camera is powered on 8.
SETTING UP YOUR SYSTEM Placing the Baby Monitor This monitor can be placed on a tabletop or hung from a screw on the wall above the area being monitored. Place the monitor within ten feet of the area being monitored for best picture and to ensure that everything will be visible with the IR LEDs on. 1. You can carry the monitor on your belt by turning up the clip on the back of the monitor. 2. You can also set up the monitor on a tabletop by turning the belt clip down and using it as a support stand.
SETTING UP YOUR SYSTEM Using the Rechargeable Battery 1. Turn the belt clip on the back of the monitor unit, upwards. 2. Remove the battery compartment cover by sliding it down off the back of the monitor ↑ 3. Insert the included rechargeable battery, plug the battery cord in to the small jack on the inside of the battery compartment. Attaching Power to the Charging Base 1. Connect the AC adapter to the charging base as shown in the diagram. 2.
CAMERA OPERATION Switching the Camera ON/OFF 1. Slide the power switch to the ON position. ↑ Position the camera to view the area you wish to monitor, angle the camera lens for best view, by turning it up or down. 2. The Power LED on the front of the camera will light up green. The camera is now ready to operate. 3.
MONITOR OPERATION Switching the Monitor ON/OFF 1. Press and hold the power button until you hear two beeps. 2. The LEVANA logo will appear on the screen for a moment followed by the picture being transmitted. 3. To turn off the unit, press and hold the power button again for 1 second. Note: The power LED will flash slowly when the rechargeable battery is low power. Setting the Brightness 1. Press the menu button once. 2.
MONITOR OPERATION Switching the Night Light ON/OFF 1. Press the menu button three times. 2. The night light icon will display on the screen along with the current status of the function, either ON or OFF. 3. Use the up and down buttons night light of the camera ON or OFF. on the left side of the monitor to turn the Switching the Vibration Function ON/OFF 1. Press the menu button four times. 2.
MONITOR OPERATION Adjusting the VOX* Sensitivity VOX = Voice Operated Transmission = Sound Detection The VOX function causes the camera to transmit video and audio immediately after a sound is heard. Once transmission begins, the video will play for 10 seconds if no more noise is heard. Pressing a button on the monitor will also turn the screen and transmission ON at any time.
MONITOR OPERATION Intercom Feature This video baby monitor is equipped with a 2-way audio intercom to enable you to talk to and soothe your baby back to sleep without going into the room. 1. Press and hold the intercom button in the middle of the front of the monitor. 2. The intercom icon will appear on the monitor screen, and you will be able to speak and be heard through the speaker in the camera. 3. To stop talking release the intercom button. Range 1.
PAIRING THE DEVICES The camera and monitor come paired (connected) together. If you do receive this package and the devices do not automatically connect and transmit, you may do so manually. 1. Slide the power switch position. on the right hand side of the camera to the OFF Light Sensor 2. Cover the light sensor on the front of the camera with your finger or a cloth. 3. Slide the power switch camera to the ON position. on the 4.
TROUBLESHOOTING PROBLEM Equipment does not function No reception Reception Interference (static) SOLUTION • • • • • • • • • • Feedback (screeching, static) • • • Noise Picture works but there is no sound • • Picture is black and white • The rechargeable battery will not charge • • • Camera and/or monitor are not switched on The battery is dead or defective The power adapters are not connected Camera and monitor are not paired Camera is too far away from monitor The VOX sensitivity is set too low The
SPECIFICATIONS Camera Specifications Input Power...............................................................100 - 240 VAC, 50 - 60 Hz ~ 200mA Output Power ............................................................6 VDC ~ 800mA IR LEDs and Range .....................................................8 LEDs, 10 foot range Range.........................................................................450 Feet Maximum Frequency Range .......................................................2.
FCC APPROVED Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Label Compliance Statement This device complies with Part 15 of the FCC Rules.
SAFETY INSTRUCTIONS Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow. Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, fireplace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight.
Please visit .com for... www.myLevana ,. . . . and much more! rmation Warranty info t product suppor ation contact inform wnloads user manual do TW501 Manual.