Instructions

Table Of Contents
69
Instruction Manual
MYeBOX 150 - MYeBOX 1500
6.3.- SETUP MENU: QUALITY SETUP
Figure 52 shows the main screen of the Quality setup menu, where the device's quality
parameters are congured.
QUALITY SETUP
Figure 52:Quality setup menu, main screen�
Press the key to enter the setup menu.
6�3�1�- OVERVOLTAGE, SWELL
This screen is used to congure the threshold value for logging an overvoltage, as a percentage
of the rated voltage value.
110 %
SOBRETENSION / SWELL
Press the key to enter edit mode.
Use the and keys to write or change the value of the blinking digit.
When the value on the screen is as desired, use the and keys to move the editing cur-
sor.
Minimum conguration value: 100%
Maximum conguration value: 150%
Note: Set the value to 0 to stop recording overvoltages.
Press the key to conrm.
Use the and keys to toggle between the menu's setup screens.
6�3�2�- GAP, SAG
This screen is used to congure the threshold value for logging gaps, as a percentage of the
rated voltage value.
090 %
HUECO / SAG
Press the key to enter edit mode.
Use the and keys to write or change the value of the blinking digit.
When the value on the screen is as desired, use the and keys to move the editing cur-
sor.