Instructions
Table Of Contents
- Safety precautions
- DISCLAIMER
- CONTENTS
- Revision log
- SYMBOLS
- 1.- VERIFICATION UPON RECEPTION
- 2.- Product description
- 3.- DEVICE installation
- 3.1.- PRELIMINARY RECOMMENDATIONS
- 3.2.- BATTERY INSTALLATION
- 3.4.- MYeBOX 480V ~ PSU ADAPTER : POWER SUPPLY ADAPTER
- 3.5.- VOLTAGE CABLES
- 3.6.- CURRENT CLAMPS
- 3.7.2.- MYeBOX 1500
- 3.8.- CONNECTION DIAGRAMS
- 3.8.1.- Three-phase network measuring with a 4-wire connection,
- MYeBOX 150.
- 3.8.2.- Three-phase network measuring with a 4-wire connection,
- MYeBOX 1500.
- 3.8.3.- Three-phase network measuring with a 3-wire connection, MYeBOX 150 and MYeBOX1500.
- 3.8.4.- Three-phase network measuring with a 3-wire connection and ARON connection, MYeBOX 150 and MYeBOX 1500.
- 3.8.5.- Two-phase network measuring with a 3-wire connection,
- MYeBOX 150.
- 3.8.6.- Two-phase network measuring with a 3-wire connection,
- MYeBOX 1500.
- 3.8.7. - Single-phase network measurement, phase to phase, with a 2-wire connection, MYeBOX 150 and MYeBOX 1500.
- 3.8.8.- Single-phase network measurement, phase to neutral, with a 2-wire connection, MYeBOX 150.
- 3.8.9.- Single-phase network measurement, phase to neutral, with a 2-wire connection, MYeBOX 1500.
- 3.8.10.- Detail of the current measurement connection.
- 3.8.11.- Leakage current connection, ILeak. (MYeBOX 1500 model)
- 3.9.- REGISTERING AND UPDATING THE DEVICE
- 4.- OPERATION
- 5.- display
- 6.- CONFIGURATION
- 6.2.2.- Measurement name
- 6.2.1.- Name of the device
- 6.1.12.- Exit
- 6.1.11.- Save
- 6.1.10.- Frequency
- 6.1.9.- Primary winding of the leakage current transformer
- 6.1.7.- Primary winding of the neutral current transformer
- 6.1.6.- Neutral clamp scale
- 6.1.5.- Primary winding of the current transformer
- 6.1.4.- Phase clamp scale
- 6.1.3.- Secondary voltage
- 6.1.2.- Primary voltage
- 6.3.2.- Gap, Sag
- 6.3.1.- Overvoltage, swell
- 6.2.5.- Exit
- 6.2.4.- Save
- 6.2.3.- Type of installation
- 6.4.1.- Wi-Fi Configuration
- 6.3.6.- Exit
- 6.3.5.- Save
- 6.3.4.- Transients, Disturb
- 6.3.3.- Outage, Interruption
- 6.4.9.- PIN
- 6.4.8.- APN, password
- 6.4.7.- APN, user
- 6.4.6.- APN, access point name
- 6.4.5.- Enabling 3G communications
- 6.4.4.- Password
- 6.4.3.- WPS
- 6.4.2.- SSID
- 6.5.- SETUP MENU: MEMORY SETUP
- 6.6.- SETUP MENU: RESET FACTORY SETUP
- 6.1.1.- Rated voltage
- 6.1.8.- Clamp scale for measuring the leakage current, ILeak
- 7.- WIRELESS COMMUNICATIONS
- 8.- MOBILE APPLICATION MYeBOX
- 9.- mYeBOX Cloud
- 10.- software UPDATE
- 11.- TECHNICAL FEATURES
- 12.- Maintenance AND TECHNICAL SERVICE
- 13.- GUARANTEE
- 14.- CE CERTIFICATE
43
Instruction Manual
MYeBOX 150 - MYeBOX 1500
The device only recognises cards in FAT32 format. If a MicroSD memory card in
another format is used, the device will not be able to write to it and a write error
will be indicated by the REC LED blinking.
We recommend not using cards that have information you wish to keep, and
backing up the information frequently for security purposes.
A ZIP le containing three le types is saved to the MicroSD memory:
A *�EVA le containing all the device's events since the last time the database was
deleted.
A *�EVQ le containing all the quality parameters of the most recent log.
Six *�STD les containing all the measurement parameters of the most recent log.
The les can be downloaded using the μUSB connector or can be sent to MYeBOX Cloud in
the cloud.
4.8.2.1. .EVA le
All events performed by the device are recorded in the �EVA le, with the date and time when
they occurred.
The MYeBOX can detect and record the following incidents:
Table 18:.EVA le description.
EVENT DESCRIPTION
BAT_ON Battery powered device.
BAT_OFF Battery level that causes the device to switch off
CLEAR_ENERGY Energy loss (boot)
SETUP_LOST Setup loss (defect)
SETUP_CHANGED Change of a conguration parameter
SETUP_TRANS_RATIO_CHANGED Change of transformation ratio congurations.
SETUP_TIME_CHANGED Change of date and time conguration.
SETUP_ALARM_CHANGED Change of an alarm parameter conguration.
SETUP_GAIN Loss of measurement adjustment parameters (defect)
FORMAT_SD Formatting of MicroSD memory
DELETE_STD_FILE Deleting STD les due to erasing a measurement
DELETE_EVQ_FILE Deleting EVQ les due to erasing a measurement
POWER_ON Device switched on
POWER_OFF Device switched off
INPUT_1_ON Status of input 1 is ON
INPUT_2_ON Status of input 2 is ON
INPUT_1_OFF Status of input 1 is OFF
INPUT_2_OFF Status of input 2 is OFF
OUTPUT_1_ON Status of output 1 is ON
OUTPUT_2_ON Status of output 2 is ON
OUTPUT_1_OFF Status of output 1 is OFF
OUTPUT_2_OFF Status of output 2 is OFF
DATA_CHANGED_BEFORE Date change (prior)
DATA_CHANGED_AFTER Date change (new)
SD_SATATUS_OK MicroSD status is correct