Instructions
Table Of Contents
- Safety precautions
- DISCLAIMER
- CONTENTS
- Revision log
- SYMBOLS
- 1.- VERIFICATION UPON RECEPTION
- 2.- Product description
- 3.- DEVICE installation
- 3.1.- PRELIMINARY RECOMMENDATIONS
- 3.2.- BATTERY INSTALLATION
- 3.4.- MYeBOX 480V ~ PSU ADAPTER : POWER SUPPLY ADAPTER
- 3.5.- VOLTAGE CABLES
- 3.6.- CURRENT CLAMPS
- 3.7.2.- MYeBOX 1500
- 3.8.- CONNECTION DIAGRAMS
- 3.8.1.- Three-phase network measuring with a 4-wire connection,
- MYeBOX 150.
- 3.8.2.- Three-phase network measuring with a 4-wire connection,
- MYeBOX 1500.
- 3.8.3.- Three-phase network measuring with a 3-wire connection, MYeBOX 150 and MYeBOX1500.
- 3.8.4.- Three-phase network measuring with a 3-wire connection and ARON connection, MYeBOX 150 and MYeBOX 1500.
- 3.8.5.- Two-phase network measuring with a 3-wire connection,
- MYeBOX 150.
- 3.8.6.- Two-phase network measuring with a 3-wire connection,
- MYeBOX 1500.
- 3.8.7. - Single-phase network measurement, phase to phase, with a 2-wire connection, MYeBOX 150 and MYeBOX 1500.
- 3.8.8.- Single-phase network measurement, phase to neutral, with a 2-wire connection, MYeBOX 150.
- 3.8.9.- Single-phase network measurement, phase to neutral, with a 2-wire connection, MYeBOX 1500.
- 3.8.10.- Detail of the current measurement connection.
- 3.8.11.- Leakage current connection, ILeak. (MYeBOX 1500 model)
- 3.9.- REGISTERING AND UPDATING THE DEVICE
- 4.- OPERATION
- 5.- display
- 6.- CONFIGURATION
- 6.2.2.- Measurement name
- 6.2.1.- Name of the device
- 6.1.12.- Exit
- 6.1.11.- Save
- 6.1.10.- Frequency
- 6.1.9.- Primary winding of the leakage current transformer
- 6.1.7.- Primary winding of the neutral current transformer
- 6.1.6.- Neutral clamp scale
- 6.1.5.- Primary winding of the current transformer
- 6.1.4.- Phase clamp scale
- 6.1.3.- Secondary voltage
- 6.1.2.- Primary voltage
- 6.3.2.- Gap, Sag
- 6.3.1.- Overvoltage, swell
- 6.2.5.- Exit
- 6.2.4.- Save
- 6.2.3.- Type of installation
- 6.4.1.- Wi-Fi Configuration
- 6.3.6.- Exit
- 6.3.5.- Save
- 6.3.4.- Transients, Disturb
- 6.3.3.- Outage, Interruption
- 6.4.9.- PIN
- 6.4.8.- APN, password
- 6.4.7.- APN, user
- 6.4.6.- APN, access point name
- 6.4.5.- Enabling 3G communications
- 6.4.4.- Password
- 6.4.3.- WPS
- 6.4.2.- SSID
- 6.5.- SETUP MENU: MEMORY SETUP
- 6.6.- SETUP MENU: RESET FACTORY SETUP
- 6.1.1.- Rated voltage
- 6.1.8.- Clamp scale for measuring the leakage current, ILeak
- 7.- WIRELESS COMMUNICATIONS
- 8.- MOBILE APPLICATION MYeBOX
- 9.- mYeBOX Cloud
- 10.- software UPDATE
- 11.- TECHNICAL FEATURES
- 12.- Maintenance AND TECHNICAL SERVICE
- 13.- GUARANTEE
- 14.- CE CERTIFICATE
85
Instruction Manual
MYeBOX 150 - MYeBOX 1500
11�- TECHNICAL FEATURES
Power supply (AC power supply adaptor)
Input
Rated voltage 100 ... 240 V ~
Frequency 47 ... 63 Hz
Consumption
MYeBOX 150 MYeBOX 1500
22... 28 VA 25... 31 VA
Installation category CAT II 300 V
Output
Rated voltage
9 V
Consumption
MYeBOX 150 MYeBOX 1500
18 W 20 W
Voltage measurement circuit
Voltage measurement margin 10 ...600 V ~ (PH-N)
Frequency measurement margin 42.5 ... 69 Hz
Input impedance 2.4 MΩ
Minimum measurement voltage (Vstart) 10 V ~
Maximum voltage input consumption 0.15 VA
Installation category CAT III 600 V
Current measurement circuit
Type of clamp / Transformer
Phase and neutral current measurement
Clamps: CPG-5, CPG-100, CPRG-500, CPRG-1000,
CPG-200/2000, FLEX-Rxxx,
Transformer with 250 mA or 333 mV output
Leakage current measurement (MYeBOX 1500 model)
CFG-5, CFG-10, WG type transformers
Nominal current (In) According to clamp Table 5 and Table 6
Current measurement margin 1 ... 200 In %
Maximum current, impulse < 1s 3*In A
Minimum measurement current(Istart) According to clamp Table 5 and Table 6
Maximum current input consumption 0.0004 VA
Installation category CAT III 600 V
Frequency of sampling
MYeBOX 150
50 Hz 60 Hz
44.8 kHz 53.76 kHz
MYeBOX 1500 57.6 kHz 69.12 kHz
Accuracy of measurements
(19)
Voltage measurement (Ph-N)
(20)
Class 0.2 (10 ...600 V~) (IEC 61557-12)
Clase A (23 ...345 V~) (IEC 61000-4-30)
Current measurement Class 0.2 (1%...200% In) (IEC 61557-12)
Measurement of active and apparent power (Vn 230/110 V~) Class 0.5 ± 1 digit (IEC 61557-12)
Reactive power measurement (Vn 230/110 V~) Class 1 ± 1 digit (IEC 61557-12)
Active energy measurement Class 0.5S (IEC 62053-22)
Reactive energy measurement Class 1 (IEC 62053-23)
Frequency measurement Clase A ( 42.5 ... 69 Hz) (IEC 61000-4-30)