User`s manual

JampII-mini Users Manual - 16 - PD0606-6-00-01
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a EP93XX
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a EP93XX
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a EP93XX
RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
loop: loaded (max 8 devices)
Using anticipatory io scheduler
edb93xxflash0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
6 RedBoot partitions found on MTD device edb93xxflash0
Creating 6 MTD partitions on "edb93xxflash0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00200000 : "zImage"
0x00200000-0x00600000 : "initrd"
0x00600000-0x007c0000 : "unallocated"
0x007c0000-0x007c1000 : "RedBoot config"
0x007e0000-0x00800000 : "FIS directory"
ep93xxusb ep93xxusb0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ep93xx_udc: version 28-6-2005
USB Device Controller Chip ID :ffff test chipID is wrong
Are you sure the USB2 Slave Daughter Board Link on EDB931X?
ep93xx-udc: probe of ep93xx-udc0 failed with error -16
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004
UTC).
Cirrus Logic ep93xx i2s audio initialized
ALSA device list:
#0: Cirrus Logic ep93xx i2s audio
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 80K
init started: BusyBox v1.1.3 (2007.01.10-17:20+0000) multi-call binary
eth0: No network cable detected!
Please press Enter to activate this console.
BusyBox v1.1.3 (2007.01.10-17:20+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
~ #