User`s manual
JampII-mini Users Manual  - 2 -  PD0606-6-00-01 
2. JampII-mini Overview 
JampII-mini a low cost compact sized single board computer based on Cirrus Logic EP9302 
processor. With a large peripheral set targeted to a variety of applications, JampII-mini is well suited 
for industrial controls, digital media servers, audio jukeboxes, thin clients, point-of-sale terminals, 
biometric security systems, and GPS devices will benefit from the EP9302's integrated architecture 
and advanced features. 
2.1.  Advanced Features 
  The heart of  JampII-mini is  the  EP9302 which is  the  one  in a  series of ARM920T  based 
processors.  The  ARM920T microprocessor  core  with separate 16  Kbytes  64-way  set-associative 
instruction and data caches is augmented by the MaverickCrunch™ coprocessor. This enables faster 
than  real-time  compression  of  audio  CDs.  The  proprietary  MaverickKey™  unique  hardware 
programmed IDs provide an excellent solution to the growing concern over secure Web content and 
commerce. MaverickKey IDs can also be used by OEMs and design houses to protect against design 
piracy by presetting ranges for unique IDs. 
  The  EP9302  is  a  high-performance,  low-power  RISC-based  device  built  around  a  single 
ARM920T  microprocessor  core.  The  ARM920T  on  the  EP9302 functions  with  a  maximum  operating 
clock  rate of  200MHz  and  a  power  usage  between  100mW  and  750mW (dependent  upon clock 
speed). The ARM core  operates  from  a  1.8V  supply  while  the  I/O  operates at  3.3V.  The  low  power 
consumption makes it an idea platform for battery operated applications. 
A  high  performance  1/10/100  Mbps  Ethernet  Media  Access  Controller  (EMAC)  is  included 
along with external interfaces to SPI and I2S Audio. A two-port USB host and two UART are included 
as well. 
The EP9302 is a high-performance, low-power RISC-based device built around an ARM920T 
microprocessor  core with  a  maximum  clock  rate  of  200 MHz.  The  ARM  core operates  from  a  1.8V 
supply, while the I/O operates at 3.3V with a power usage between 100mW and 675mW. 
The list below summarizes the features of JampII-mini. 
  - 200 MHz ARM920T Processor 
16 Kbyte Instruction Cache 
16 Kbyte Data Cache 
Linux®, Microsoft® Windows® CE enabled MMU 
100 MHz System Bus 










