Operating instructions

The Dedicated Traffic Page

600-00108-000 Rev 07 -20- Entegra EX5000

Acknowledging the TA message from the Traffic mode removes it

from the message bar, allowing other messages to be displayed. The

TA message is automatically removed when the threat is reduced or

the intruder is no longer present.

Figure 3.1 Map Page—Traffic Mode

1) Exit Traffic—Restores the Map Page to the previous settings. If

the Map Page is restored prior to acknowledging a TA, the

message will remain displayed and acknowledging it will once

again bring up the dedicated Traffic Page.

The available Traffic button modes are listed below. For more

information on specific traffic sensor modes, consult the user

documentation for your traffic sensor.

● Avidyne TAS600 series (including 9900BX), Skywatch, and

Bendix/King —Traffic modes are ABOVE, NORMAL, UNLIMTD,

BELOW, and DSPLY OFF.

Note: Traffic limitations and operational ranges depend on the

installed traffic sensor. For TAS or TCAD sensors, see the

corresponding sensor Pilot Guide. For TIS sensors, see Section 1-3-

5 of the Aeronautical Information Manual.