User's Manual

10/100Mbps Ethernet USB Adapter
6
LNK/ ACT LED
The green LED displays the link and activity
status. If a good link is established on the port,
this green LED will be continuously lit. When
data is transmitted the green LED will flash.
100 LED
The green LED displays the speed interface con-
nection status. If a valid connection is detected
via the USB interface and the driver is initialized
properly, the green LED will be lit.
USB Cable
A USB cable , 64cm length totally,is equipped with a
standard receptacle at each end respectively.
Network Driver
The driver diskette contains different network driver
for different Network Operating Syetems. For more
information about the drive installation, refer to
README.TXT in the driver diskette.