User's Manual

10/100Mbps Ethernet USB Adapter
7
Section 2 Installing the Adapter
The USB adapter is designed for Plug-and-Play
installation, performing the steps as below to
connect your USB adapter to the network.
Step1 Connect the one end of the USB
cable to the Type-B receptacle of the
USB adapter, and connect the other
end (Type-A) to the PC's USB
interface port, ensuring the connectors
are fully engaged.
Figure 2-1 Installing the adapter to
a network application
Step2 Connecting UTP cable
Connect one end of a twisted-pair cable
to the USB adapter's RJ-45 port, and the
other end to an appropriate device with
a 10Mbps or 100Mbps Ethernet interface
.
Type-A
receptacle
Type-B
receptacle
USB Cable
USB Adapter
PC
USB Port
10 /100Mbps Network
10BAES-T and 100BASE-TX Port