User's Manual

3. Highlight Protocol from the
list of network component
types, as shown in Figure 8-3,
and click the Add button.
4. From the screen
shown in Figure 8-
4, select Microsoft
from the list of
“Manufacturers”
and TCP/IP from
the list of “Network
Protocols” and click
the OK button.
Repeat steps two
through four to
install other proto-
cols, such as
NetBEUI or IPX/SPX.
5. To verify that the drivers are
working under Enhanced
Mode on the Driver Type tab
or reconfigure the card on
the Advanced tab, go to the
screen shown in Figure 8-2
and click the Properties but-
ton. This will bring up the
Properties Tabs, where such
values can be refined.
When finished, you must
restart your computer to
complete installation.
40
Chapter 8: Installing Network
Protocols
Protocols are necessary for computers to communicate on your network.
1. From the Start
Menu, select
Settings and
bring up the
Control Panel,
as shown in
Figure 8-1. From
the Control
Panel, double-
click the
Network icon.
2. Select Instant Wireless
Network PC Card V3.0
from the list (as shown in
Figure 8-2) and click the
Add button.
39
Figure 8-3
Figure 8-4
Figure 8-5
Network PC Card
Figure 8-1
Figure 8-2
Instant Wireless
Series