User's Manual

5. The Select OEM Option screen will display all available adapters. Make
sure that Instant Wireless - Network PC Card V3.0 is highlighted, as
shown in Figure 6-22, and click the OK button to continue.
6. You will now reach the screen shown in Figure 6-13. This is called the
Resources & Properties screen. It is recommended that you leave these
options at their
default settings. If
settings must be
changed, it is pre-
ferred that you use
the Configuration
Utility that came
with the Network PC
Card. If you must
adjust the settings on
this screen, refer to
Chapter 9: Advanced
Properties for more
information on the
Advanced Properties
for Windows NT.
Click the OK button
to continue.
Figure 6-22
Figure 6-23
2. To add the Network PC Card,
click the Adapters tab (as
shown in Figure 6-19) and
click the Add button to con-
tinue.
3. A list of adapters
will appear as
shown in Figure 6-
20. You will not
want to select one of
these, however, as
the Setup Utility
CD has all of the
appropriate drivers.
Click the Have Disk
button to continue.
4. On the Insert Disk
screen (Figure 6-21),
type “D:\WINNT” in
the field provided.
Then, click the OK
button to continue.
Netw ork PC Card
Figure 6-19
Figure 6-20
Figure 6-21
Instant Wireless
TM
Series
27 28