User's Manual

3. The screen shown

in Figure 2-11 will

appear, indicating

that all of the

appropriate files

are being copied

onto your drive.

Click the Cancel

button if you need

to stop the installa-

tion for any reason.

4. Once Windows has finished copying the necessary files, the screen shown

in Figure 2-12 will appear. In order for the drivers to be installed properly,

you must restart your computer. If you choose to do it now, select Yes, I

want to restart my computer now. If you do not want to do it now,

choose No, I will restart my computer later. Once you have made your

choice, click the Finish button to continue.

1. If you have chosen Infrastructure mode, the following screen (Figure 2-9)

will appear. If you have chosen Ad-Hoc mode, skip to the next section,

titled “Ad-Hoc Mode”.

You will be prompted to enter an SSID value in the box provided. The

SSID may be up to 32 characters in length. This may include any character

on the keyboard, keeping in mind that the SSID is case sensitive. All SSID

values on your wireless network must match. If you are unsure, use the

default value of “linksys.” Then, click the Next button.

2. The Review

Settings screen

(Figure 2-10) will

appear next. Verify

that all the settings

are correct and

click the Next but-

ton to continue.

Note: Restart the computer and go to Chapter 3:

Installing the Network PC Card for further instructions.

Infra st ruct ure Mode

Figure 2-9

Figure 2-10

Figure 2-11

Figure 2-12

Instant Wireless

Series

Netw ork PC Card