User's Manual

2. The screen shown in Figure 2-14 should appear. You will be prompted to

enter an SSID value in the field provided. All SSID values on your wire-

less network must match. If you are unsure, use the default value of

“linksys.” Then, click the Next button.

3. The next screen to appear (Figure 2-15) will be the Review Settings screen.

Verify that all the settings are correct and click the Next button to contin-

ue.

Netw ork PC Card

1. If you have chosen Ad-Hoc mode, the following screen will appear. (See

Figure 2-13.) If you have chosen Infrastructure mode, refer to the previ-

ous section, titled “Infrastructure Mode”.

You will be prompted to choose a Channel from the list provided. All

computers on your wireless network must be using the same channel in

order to communicate with each other. If you are unsure about which chan-

nel to use, select the default channel (Channel 6). Once you have chosen

your channel, click the Next button.

Ad-Hoc M ode

Figure 2-13

Figure 2-14

Figure 2-15

Instant Wireless

Series