User's Manual

Statement 417Location of Power Cord
To reduce the risk of electric shock, fire or personal injury, do not place power cables in areas where they may
be walked on or damaged by items placed upon or against it.
Warning
Statement 418Not For Special Environments
This product is intended for use in a normal environment based on the standard IEC 60950-1. Do not use the product
in vehicles, on board ships, in aircrafts or in medical applications with physical connection to the patient, nor in
environments with exposure to moisture, dust, vibration or ingress of water.
Warning
Statement 1004Installation Instructions
Read the installation instructions before connecting the system to the power source.
Warning
Statement 1007TN and IT Power Systems
This equipment has been designed for connection to TN and IT power systems.
Warning
Statement 1021SELV Circuit
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage
(TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports
both use RJ-45 connectors. Use caution when connecting cables.
Warning
Regulatory Compliance and Safety InformationCisco Spark Codec Plus
5
Regulatory Compliance and Safety InformationCisco Spark Codec Plus
REVIEW DRAFT - CISCO CONFIDENTIAL