User's Manual Part 1
Table Of Contents
- contents
- Preface
- Product Overview
- Preparing for Installation
- Installing the Client Adapter
- Using the Profile Manager
- Configuring the Client Adapter
- Overview
- Setting System Parameters
- Setting RF Network Parameters
- Setting Advanced Infrastructure Parameters
- Setting Advanced Ad Hoc Parameters
- Setting Network Security Parameters
- Using EAP Authentication
- Performing Diagnostics
BETA DRAFT - CISCO CONFIDENTIAL
7-14
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-03
Chapter 7 Performing Diagnostics
Viewing Statistics for Your Client Adapter
AP Mismatches The number of times the client adapter tried to associate to an
access point but was unable to because the access point was not
the adapter’s specified access point.
Note Refer to the Specified Access Point 1- 4 parameter in
Table 5-4 for information on specifying access points.
Data Rate Mismatches The number of times the client adapter tried to associate to an
access point but was unable to because the adapter’s data rate was
not supported by the access point.
Note Refer to the Data Rate parameter in Table 5-3 for
information on supported data rates.
Authentication Rejects The number of times the client adapter tried to authenticate to an
access point but was rejected.
Authentication T/O The number of times the client adapter tried to authenticate to an
access point but was unable to because the access point did not
respond fast enough (timed out).
Association Rejects The number of times the client adapter tried to associate to an
access point but was rejected.
Association T/O The number of times the client adapter tried to associate to an
access point but was unable to because the access point did not
respond fast enough (timed out).
Packets Aged The number of packets received successfully but discarded by the
client adapter because either all fragments were not received
within 10 seconds or the host did not read the packet from the
adapter within 10 seconds.
Packets MIC OK The number of packets that were received successfully with a
valid message integrity check (MIC).
Note This field is not displayed if the client adapter’s driver
does not support MIC functionality or MIC is not enabled
on the access point.
Packets No MIC The number of packets that were discarded due to no MIC being
found.
Note This field is not displayed if the client adapter’s driver
does not support MIC functionality or MIC is not enabled
on the access point.
Packets Incorrect MIC The number of packets that were discarded due to an incorrect
MIC value.
Note This field is not displayed if the client adapter’s driver
does not support MIC functionality or MIC is not enabled
on the access point.
Table 7-4 Client Adapter Statistics (continued)
Statistic Description